From: Arnd Bergmann <arnd@arndb.de>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@deeprootsystems.com>,
davinci-linux-open-source@linux.davincidsp.com,
Cyril Chemparathy <cyril@ti.com>, Arnd Bergmann <arnd@arndb.de>,
Alexandre Courbot <gnurou@gmail.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Mark Brown <broonie@kernel.org>,
Samuel Ortiz <sameo@linux.intel.com>,
linux-gpio@vger.kernel.org, linux-input@vger.kernel.org,
linux-spi@vger.kernel.org
Subject: [PATCH 0/5] ARM: davinci: tnetv107x removal
Date: Wed, 26 Feb 2014 13:43:29 +0100 [thread overview]
Message-ID: <1393418614-3968549-1-git-send-email-arnd@arndb.de> (raw)
This series removes the TI davinci/tnetv107x platform that
has evidently bitrotted to the point where it's completely
useless. While we could probably fix it and add a defconfig,
it appears that there are actually no users of this platform,
and it complicates the davinci code base because it's
incompatible with all the other SoCs in there that are
based on ARM926T.
The five patches are completely independent of one another,
and applying them out of order is fine since we just want
to remove the code. However, I'm looking for an Ack from
Cyril Chemparathy and Sekhar Nori first, to be sure we
won't need this code in the future. Kevin Hilman has
already mentioned that he sees no reason to keep this
code.
I can apply the first patch directly into arm-soc once
I have an Ack, and I'd like the other patches to get picked
up by the respective subsystem maintainers.
Arnd
Arnd Bergmann (5):
ARM: davinci: remove tnetv107x support
gpio: remove obsolete tnetv107x driver
spi: remove obsolete spi-ti-ssp driver
mfd: remove obsolete ti-ssp driver
input: remove obsolete tnetv107x drivers
arch/arm/Kconfig.debug | 13 +-
arch/arm/mach-davinci/Kconfig | 12 -
arch/arm/mach-davinci/Makefile | 2 -
arch/arm/mach-davinci/board-tnetv107x-evm.c | 287 ---------
arch/arm/mach-davinci/devices-tnetv107x.c | 434 --------------
arch/arm/mach-davinci/include/mach/cputype.h | 8 -
arch/arm/mach-davinci/include/mach/irqs.h | 97 ---
arch/arm/mach-davinci/include/mach/mux.h | 269 ---------
arch/arm/mach-davinci/include/mach/psc.h | 47 --
arch/arm/mach-davinci/include/mach/serial.h | 8 -
arch/arm/mach-davinci/include/mach/tnetv107x.h | 61 --
arch/arm/mach-davinci/include/mach/uncompress.h | 6 -
arch/arm/mach-davinci/tnetv107x.c | 766 ------------------------
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-tnetv107x.c | 206 -------
drivers/input/keyboard/Kconfig | 10 -
drivers/input/keyboard/Makefile | 1 -
drivers/input/keyboard/tnetv107x-keypad.c | 329 ----------
drivers/input/touchscreen/Kconfig | 9 -
drivers/input/touchscreen/Makefile | 1 -
drivers/input/touchscreen/tnetv107x-ts.c | 384 ------------
drivers/mfd/Kconfig | 11 -
drivers/mfd/Makefile | 1 -
drivers/mfd/ti-ssp.c | 465 --------------
drivers/spi/Kconfig | 7 -
drivers/spi/Makefile | 1 -
drivers/spi/spi-ti-ssp.c | 378 ------------
include/linux/platform_data/gpio-davinci.h | 4 -
28 files changed, 1 insertion(+), 3817 deletions(-)
delete mode 100644 arch/arm/mach-davinci/board-tnetv107x-evm.c
delete mode 100644 arch/arm/mach-davinci/devices-tnetv107x.c
delete mode 100644 arch/arm/mach-davinci/include/mach/tnetv107x.h
delete mode 100644 arch/arm/mach-davinci/tnetv107x.c
delete mode 100644 drivers/gpio/gpio-tnetv107x.c
delete mode 100644 drivers/input/keyboard/tnetv107x-keypad.c
delete mode 100644 drivers/input/touchscreen/tnetv107x-ts.c
delete mode 100644 drivers/mfd/ti-ssp.c
delete mode 100644 drivers/spi/spi-ti-ssp.c
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-spi@vger.kernel.org
--
1.8.3.2
next reply other threads:[~2014-02-26 12:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-26 12:43 Arnd Bergmann [this message]
2014-02-26 12:43 ` [PATCH 1/5] ARM: davinci: remove tnetv107x support Arnd Bergmann
2014-02-26 14:44 ` Kevin Hilman
2014-02-26 12:43 ` [PATCH 2/5] gpio: remove obsolete tnetv107x driver Arnd Bergmann
2014-03-05 1:52 ` Linus Walleij
2014-03-05 2:45 ` Linus Walleij
2014-02-26 12:43 ` [PATCH 3/5] spi: remove obsolete spi-ti-ssp driver Arnd Bergmann
2014-03-03 6:38 ` Mark Brown
2014-02-26 12:43 ` [PATCH 4/5] mfd: remove obsolete ti-ssp driver Arnd Bergmann
2014-02-26 12:51 ` Lee Jones
2014-02-26 20:57 ` Russell King - ARM Linux
2014-02-26 22:00 ` Lee Jones
2014-02-26 12:43 ` [PATCH 5/5] input: remove obsolete tnetv107x drivers Arnd Bergmann
2014-02-26 13:46 ` [PATCH 0/5] ARM: davinci: tnetv107x removal Arnd Bergmann
2014-02-26 20:04 ` Sergei Shtylyov
2014-02-27 13:37 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393418614-3968549-1-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=cyril@ti.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=dmitry.torokhov@gmail.com \
--cc=gnurou@gmail.com \
--cc=khilman@deeprootsystems.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=nsekhar@ti.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®