From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753635AbaBZRCS (ORCPT ); Wed, 26 Feb 2014 12:02:18 -0500 Received: from top.free-electrons.com ([176.31.233.9]:39821 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753091AbaBZRBZ (ORCPT ); Wed, 26 Feb 2014 12:01:25 -0500 From: Alexandre Belloni To: Nicolas Ferre Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Jean-Christophe Plagniol-Villard , Maxime Ripard , Gregory Clement , b.brezillon@overkiz.com, Alexandre Belloni Subject: [PATCH 5/7] ARM: at91/dt: at91sam9g45: remove useless adc properties Date: Wed, 26 Feb 2014 18:01:12 +0100 Message-Id: <1393434074-15600-5-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1393434074-15600-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1393434074-15600-1-git-send-email-alexandre.belloni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Remove the properties that are not used anymore by the at91_adc driver. Also, stop using unit-addresses for the triggers as suggested by Mark Rutland in http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/234184.html Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91sam9g45.dtsi | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index cbcc058b26b4..715187692577 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -638,34 +638,29 @@ atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; - atmel,adc-num-channels = <8>; atmel,adc-startup-time = <40>; - atmel,adc-channel-base = <0x30>; - atmel,adc-drdy-mask = <0x10000>; - atmel,adc-status-register = <0x1c>; - atmel,adc-trigger-register = <0x08>; atmel,adc-res = <8 10>; atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; -- 1.8.3.2