From: Roger Quadros <rogerq@ti.com>
To: <lee.jones@linaro.org>, <tony@atomide.com>, <bcousson@baylibre.com>
Cc: <balbi@ti.com>, <linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-usb@vger.kernel.org>, Roger Quadros <rogerq@ti.com>,
Alan Stern <stern@rowland.harvard.edu>, Nishant Menon <nm@ti.com>,
Kevin Hilman <khilman@linaro.org>
Subject: [PATCH v9 8/9] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes
Date: Thu, 27 Feb 2014 16:18:30 +0200 [thread overview]
Message-ID: <1393510711-4697-9-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1393510711-4697-1-git-send-email-rogerq@ti.com>
The OMAP EHCI and OHCI controllers are not compatible with drivers
other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get
rid of the incompatible ids.
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Nishant Menon <nm@ti.com>
CC: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap3.dtsi | 4 ++--
arch/arm/boot/dts/omap4.dtsi | 4 ++--
arch/arm/boot/dts/omap5.dtsi | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index a5fc83b..8e7de9e 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -634,14 +634,14 @@
ranges;
usbhsohci: ohci@48064400 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x48064400 0x400>;
interrupt-parent = <&intc>;
interrupts = <76>;
};
usbhsehci: ehci@48064800 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x48064800 0x400>;
interrupt-parent = <&intc>;
interrupts = <77>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 39a05ce..ff1b057 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -705,14 +705,14 @@
"refclk_60m_ext_p2";
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index d4dae48..f65aa65 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -783,14 +783,14 @@
"refclk_60m_ext_p2";
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
};
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
--
1.8.3.2
next prev parent reply other threads:[~2014-02-27 14:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-27 14:18 [PATCH v9 0/9] USB Host support for OMAP5 uEVM Roger Quadros
2014-02-27 14:18 ` [PATCH v9 1/9] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-03-10 14:14 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 2/9] mfd: omap-usb-host: Always fail on clk_get() error Roger Quadros
2014-03-10 14:17 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 3/9] mfd: omap-usb-host: Use proper clock name instead of alias Roger Quadros
2014-03-10 14:32 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 4/9] mfd: omap-usb-host: Use clock names as per function for reference clocks Roger Quadros
2014-03-10 14:34 ` Lee Jones
2014-02-27 14:18 ` [PATCH v9 5/9] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-02-27 14:18 ` [PATCH v9 6/9] mfd: omap-usb-tll: " Roger Quadros
2014-02-27 14:18 ` [PATCH v9 7/9] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-02-27 14:18 ` Roger Quadros [this message]
2014-02-27 14:18 ` [PATCH v9 9/9] usb: omap: dts: Update DT binding example usage Roger Quadros
2014-02-28 22:56 ` [PATCH v9 0/9] USB Host support for OMAP5 uEVM Tony Lindgren
2014-03-03 9:34 ` Roger Quadros
2014-03-04 18:47 ` Tony Lindgren
2014-03-11 8:48 ` Roger Quadros
2014-03-11 12:02 ` Lee Jones
2014-03-11 12:16 ` Roger Quadros
2014-03-11 13:07 ` Lee Jones
2014-03-11 13:10 ` Roger Quadros
2014-03-11 16:24 ` Tony Lindgren
2014-03-13 22:34 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393510711-4697-9-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nm@ti.com \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®