mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Feng Kan <fkan@apm.com>
To: tglx@linutronix.de, patches@apm.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, marc.zyngier@arm.com
Cc: Feng Kan <fkan@apm.com>, Vinayak Kale <vkale@apm.com>
Subject: [PATCH V2] irqchip:gic: change access of gicc_ctrl register to read modify write.
Date: Thu, 27 Feb 2014 11:34:55 -0700	[thread overview]
Message-ID: <1393526095-31479-1-git-send-email-fkan@apm.com> (raw)

This change is made to preserve the GIC v2 releated bits in the
GIC_CPU_CTRL register (also known as the GICC_CTLR register in spec).
The original code only set the enable/disable group bit in this register.
This code will preserve the bypass bits configured by the bootload except
the enable/disable bit. The main reason for this change is to allow the
bypass bits specified in the v2 spec to remain untouched by the current
GIC code. In the X-Gene platform, the bypass functionality is not used
and bypass must be disabled at all time.

Signed-off-by: Vinayak Kale <vkale@apm.com>
Acked-by: Anup Patel <apatel@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
---
V2 Changes:
	- only mask off v2 bypass bits

 drivers/irqchip/irq-gic.c |   22 +++++++++++++++++++---
 1 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 341c601..757581b 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -418,6 +418,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
 	void __iomem *dist_base = gic_data_dist_base(gic);
 	void __iomem *base = gic_data_cpu_base(gic);
 	unsigned int cpu_mask, cpu = smp_processor_id();
+	unsigned int ctrl_mask;
 	int i;
 
 	/*
@@ -449,13 +450,24 @@ static void gic_cpu_init(struct gic_chip_data *gic)
 		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
 
 	writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
-	writel_relaxed(1, base + GIC_CPU_CTRL);
+
+	ctrl_mask = readl(base + GIC_CPU_CTRL);
+	ctrl_mask |= 0x1;
+	writel_relaxed(ctrl_mask, base + GIC_CPU_CTRL);
 }
 
 void gic_cpu_if_down(void)
 {
+	unsigned int ctrl_mask;
 	void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
-	writel_relaxed(0, cpu_base + GIC_CPU_CTRL);
+
+	ctrl_mask = readl(cpu_base + GIC_CPU_CTRL);
+	/*
+	 * Disable grp enable bits, leave the bypass bits alone as they
+	 * may impact correct operation
+	 */
+	ctrl_mask &= 0x1e0;
+	writel_relaxed(ctrl_mask, cpu_base + GIC_CPU_CTRL);
 }
 
 #ifdef CONFIG_CPU_PM
@@ -566,6 +578,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
 {
 	int i;
 	u32 *ptr;
+	unsigned int ctrl_mask;
 	void __iomem *dist_base;
 	void __iomem *cpu_base;
 
@@ -590,7 +603,10 @@ static void gic_cpu_restore(unsigned int gic_nr)
 		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
 
 	writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
-	writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+
+	ctrl_mask = readl(cpu_base + GIC_CPU_CTRL);
+	ctrl_mask |= 0x1;
+	writel_relaxed(ctrl_mask, cpu_base + GIC_CPU_CTRL);
 }
 
 static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
-- 
1.7.1


             reply	other threads:[~2014-02-27 19:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-27 18:34 Feng Kan [this message]
2014-02-27 18:54 ` Marc Zyngier
2014-02-27 21:00   ` Feng Kan
2014-02-27 21:29     ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393526095-31479-1-git-send-email-fkan@apm.com \
    --to=fkan@apm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=patches@apm.com \
    --cc=tglx@linutronix.de \
    --cc=vkale@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®