From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754574AbaCDPuw (ORCPT ); Tue, 4 Mar 2014 10:50:52 -0500 Received: from fw-tnat.cambridge.arm.com ([217.140.96.21]:51465 "EHLO cam-smtp0.cambridge.arm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754477AbaCDPur (ORCPT ); Tue, 4 Mar 2014 10:50:47 -0500 From: Liviu Dudau To: linux-pci , Bjorn Helgaas , Catalin Marinas , Will Deacon , linaro-kernel Cc: Benjamin Herrenschmidt , LKML , "devicetree@vger.kernel.org" , LAKML , Tanmay Inamdar , Arnd Bergmann Subject: [PATCH v5 5/7] pci: Use parent domain number when allocating child busses. Date: Tue, 4 Mar 2014 15:50:02 +0000 Message-Id: <1393948204-11555-6-git-send-email-Liviu.Dudau@arm.com> X-Mailer: git-send-email 1.9.0 In-Reply-To: <1393948204-11555-1-git-send-email-Liviu.Dudau@arm.com> References: <1393948204-11555-1-git-send-email-Liviu.Dudau@arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org pci_alloc_child_bus() uses the newly allocated child bus to figure out the domain number that is going to use for setting the device name. A better option is to use the parent bus domain number. Signed-off-by: Liviu Dudau diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 26237a0..a12cda5 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -677,7 +677,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, * now as the parent is not properly set up yet. */ child->dev.class = &pcibus_class; - dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr); + dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(parent), busnr); /* * Set up the primary, secondary and subordinate -- 1.9.0