From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751990AbaHTI70 (ORCPT ); Wed, 20 Aug 2014 04:59:26 -0400 Received: from rtits2.realtek.com ([60.250.210.242]:34239 "EHLO rtits2.realtek.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751344AbaHTI7Y (ORCPT ); Wed, 20 Aug 2014 04:59:24 -0400 X-SpamFilter-By: BOX Solutions SpamTrap 5.39 with qID s7K8xKRC002820, This message is accepted by code: ctloc85258 From: Hayes Wang To: CC: , , , Hayes Wang Subject: [PATCH net-next 3/4] r8152: remove clear_bp function Date: Wed, 20 Aug 2014 16:58:38 +0800 Message-ID: <1394712342-15778-19-Taiwan-albertk@realtek.com> X-Mailer: Microsoft Office Outlook 11 In-Reply-To: <1394712342-15778-16-Taiwan-albertk@realtek.com> References: <1394712342-15778-16-Taiwan-albertk@realtek.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [172.21.71.44] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The functions are used to update the firmware. Move the actions into the firmware files. Signed-off-by: Hayes Wang --- drivers/net/usb/r8152.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 33dcc97..937d132 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2189,28 +2189,6 @@ static void rtl_phy_reset(struct r8152 *tp) } } -static void rtl_clear_bp(struct r8152 *tp) -{ - ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0); - ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0); - ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0); - ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0); - ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0); - ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0); - ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0); - ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0); - mdelay(3); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0); -} - -static void r8153_clear_bp(struct r8152 *tp) -{ - ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0); - ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0); - rtl_clear_bp(tp); -} - static void r8153_teredo_off(struct r8152 *tp) { u32 ocp_data; @@ -2248,7 +2226,6 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp) r8152b_disable_aldps(tp); - rtl_clear_bp(tp); r8152b_enable_aldps(tp); set_bit(PHY_RESET, &tp->flags); @@ -2404,7 +2381,6 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) r8152_mdio_write(tp, MII_BMCR, data); } - r8153_clear_bp(tp); if (tp->version == RTL_VER_03) { data = ocp_reg_read(tp, OCP_EEE_CFG); -- 1.9.3