[PATCH net 1/2] r8152: fix wrong checksum status for received IPv4 packets

[Hayes Wang <hayeswang@realtek.com>]

The device could only check the checksum of TCP and UDP packets. Therefore,
for the IPv4 packets excluding TCP and UDP, the check of checksum is necessary,
even though the IP checksum is correct.

Take ICMP for example, The IP checksum may be correct, but the ICMP checksum
may be wrong.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 0657203ffb91..756de9ea8d2e 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1848,11 +1848,9 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
 	if (opts2 & RD_IPV4_CS) {
 		if (opts3 & IPF)
 			checksum = CHECKSUM_NONE;
-		else if ((opts2 & RD_UDP_CS) && (opts3 & UDPF))
-			checksum = CHECKSUM_NONE;
-		else if ((opts2 & RD_TCP_CS) && (opts3 & TCPF))
-			checksum = CHECKSUM_NONE;
-		else
+		else if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
+			checksum = CHECKSUM_UNNECESSARY;
+		else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
 			checksum = CHECKSUM_UNNECESSARY;
 	} else if (opts2 & RD_IPV6_CS) {
 		if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
-- 
2.13.6