From: Hayes Wang <hayeswang@realtek.com>
To: <netdev@vger.kernel.org>
Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>,
<linux-usb@vger.kernel.org>, Hayes Wang <hayeswang@realtek.com>
Subject: [PATCH net-next] r8152: use usleep_range
Date: Tue, 9 Sep 2014 11:40:28 +0800 [thread overview]
Message-ID: <1394712342-15778-35-Taiwan-albertk@realtek.com> (raw)
Replace mdelay with usleep_range to avoid busy loop.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f95e678..2130c75 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2051,13 +2051,13 @@ static void rtl8152_disable(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
for (i = 0; i < 1000; i++) {
if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
for (i = 0; i < RTL8152_MAX_RX; i++)
@@ -2202,7 +2202,7 @@ static void rtl_clear_bp(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0);
ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0);
ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0);
- mdelay(3);
+ usleep_range(3000, 6000);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0);
ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
}
@@ -2288,7 +2288,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2299,7 +2299,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
rtl8152_nic_reset(tp);
@@ -2360,7 +2360,7 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2371,7 +2371,7 @@ static void r8152b_enter_oob(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
@@ -2518,7 +2518,7 @@ static void r8153_first_init(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2529,7 +2529,7 @@ static void r8153_first_init(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
@@ -2573,7 +2573,7 @@ static void r8153_enter_oob(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
@@ -2584,7 +2584,7 @@ static void r8153_enter_oob(struct r8152 *tp)
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
if (ocp_data & LINK_LIST_READY)
break;
- mdelay(1);
+ usleep_range(1000, 2000);
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS);
--
1.9.3
next reply other threads:[~2014-09-09 3:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-09 3:40 Hayes Wang [this message]
2014-09-10 3:11 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394712342-15778-35-Taiwan-albertk@realtek.com \
--to=hayeswang@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®