From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933761AbaCQODr (ORCPT ); Mon, 17 Mar 2014 10:03:47 -0400 Received: from top.free-electrons.com ([176.31.233.9]:58251 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932870AbaCQN5V (ORCPT ); Mon, 17 Mar 2014 09:57:21 -0400 From: Alexandre Belloni To: Nicolas Ferre , Jonathan Cameron , Dmitry Torokhov Cc: Jean-Christophe Plagniol-Villard , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org, linux-input@vger.kernel.org, Maxime Ripard , Gregory Clement , Alexandre Belloni Subject: [PATCH v2 02/15] ARM: at91: sam9260: remove unused platform_data Date: Mon, 17 Mar 2014 14:56:55 +0100 Message-Id: <1395064628-644-3-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1395064628-644-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1395064628-644-1-git-send-email-alexandre.belloni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org num_channels and registers are not used anymore since they are defined inside the at91_adc driver and assigned by matching the id_table. Also, remove the mach/at91_adc.h include that is not necessary anymore. Signed-off-by: Alexandre Belloni Acked-by: Jonathan Cameron --- arch/arm/mach-at91/at91sam9260_devices.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 0a0315920963..a299c50512f0 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -24,7 +24,6 @@ #include #include #include -#include #include "board.h" #include "generic.h" @@ -1321,13 +1320,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g20 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = AT91_ADC_MR, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1345,9 +1337,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PA22, 0); - data->num_channels = 4; data->startup_time = 10; - data->registers = &at91_adc_register_g20; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; -- 1.8.3.2