mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Srikanth Thokala <sthokal@xilinx.com>
To: dan.j.williams@intel.com, vinod.koul@intel.com,
	michal.simek@xilinx.com, grant.likely@linaro.org,
	robh+dt@kernel.org
Cc: levex@linux.com, lars@metafoo.de,
	andriy.shevchenko@linux.intel.com, jaswinder.singh@linaro.org,
	dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Srikanth Thokala <sthokal@xilinx.com>
Subject: [PATCH v6 0/2] Add Xilinx AXI Video DMA Engine driver
Date: Tue, 18 Mar 2014 00:36:30 +0530	[thread overview]
Message-ID: <1395083192-3224-1-git-send-email-sthokal@xilinx.com> (raw)

Hi,

This is the driver for Xilinx AXI Video Direct Memory Access Engine.
It is a soft IP core, which provides high-bandwidth direct memory
access between memory and AXI4-Stream video type target peripherals
including peripherals which support AXI4-Stream Video Protocol. The
core provides efficient two dimensional DMA operations with independent
asynchronous read and write channel operation.

For more information on the IP, please refer to
http://www.xilinx.com/support/documentation/ip_documentation/axi_vdma/v6_1/pg020_axi_vdma.pdf

Use cases:
++++++++++
1. Xilinx Video Targeted Reference design
   http://www.wiki.xilinx.com/Zynq+Base+TRD+14.5
2. Common Display Framework
   http://events.linuxfoundation.org/sites/events/files/slides/20131024-elce.pdf

Regards,
Srikanth

Changes in v6:
- Fixed minor comments suggested by Andy, Thanks.

Changes in v5:
- Modified to accept only 1 frame per interleaved_dma() call, as
  suggested by Jaswinder, Thanks.

Changes in v4:
- Rebased on v3.14.0-rc5
- Reverted the changes that were done for the earlier patch series,
  1/3 - 'Support multiple interleaved frames with non-contiguous memory' as
  suggested by Jaswinder, Thanks.

Changes in v3:
- Created a separate patch for the DT binding documentation as suggested by
  Vinod, Thanks.
- Added support for interleaved frames with non-contiguous memory as suggested
  by Lars, Thanks.
- Rebased on v3.14.0-rc2

Srikanth Thokala (2):
  dma: Add Xilinx Video DMA DT Binding Documentation
  dma: Add Xilinx AXI Video Direct Memory Access Engine driver support

 .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt |   75 ++
 drivers/dma/Kconfig                                |   14 +
 drivers/dma/Makefile                               |    1 +
 drivers/dma/xilinx/Makefile                        |    1 +
 drivers/dma/xilinx/xilinx_vdma.c                   | 1382 ++++++++++++++++++++
 include/linux/amba/xilinx_dma.h                    |   47 +
 6 files changed, 1520 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
 create mode 100644 drivers/dma/xilinx/Makefile
 create mode 100644 drivers/dma/xilinx/xilinx_vdma.c
 create mode 100644 include/linux/amba/xilinx_dma.h

-- 
1.7.4


             reply	other threads:[~2014-03-17 19:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-17 19:06 Srikanth Thokala [this message]
2014-03-17 19:06 ` [PATCH v6 1/2] dma: Add Xilinx Video DMA DT Binding Documentation Srikanth Thokala
2014-03-17 19:06 ` [PATCH v6 2/2] dma: Add Xilinx AXI Video Direct Memory Access Engine driver support Srikanth Thokala
2014-03-24  6:20   ` Jassi Brar
2014-03-24  9:00     ` Srikanth Thokala
2014-03-24 10:51       ` Jassi Brar
2014-03-24 10:59         ` Michal Simek
2014-03-24 11:02           ` Jassi Brar
2014-03-24 12:06             ` Michal Simek
2014-03-24 15:14         ` Srikanth Thokala
2014-03-24 15:23           ` Jassi Brar
2014-03-24 16:35             ` Srikanth Thokala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395083192-3224-1-git-send-email-sthokal@xilinx.com \
    --to=sthokal@xilinx.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=grant.likely@linaro.org \
    --cc=jaswinder.singh@linaro.org \
    --cc=lars@metafoo.de \
    --cc=levex@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®