From: Tomas Winkler <tomas.winkler@intel.com>
To: gregkh@linuxfoundation.org
Cc: arnd@arndb.de, rjw@rjwysocki.net, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, Tomas Winkler <tomas.winkler@intel.com>,
Alexander Usyskin <alexander.usyskin@intel.com>
Subject: [char-misc-next 10/13] mei: use runtime pm in write and read flow
Date: Tue, 18 Mar 2014 22:52:04 +0200 [thread overview]
Message-ID: <1395175927-10562-11-git-send-email-tomas.winkler@intel.com> (raw)
In-Reply-To: <1395175927-10562-1-git-send-email-tomas.winkler@intel.com>
Take rpm token on operation start to initiate rpm resume if needed.
Mark last busy time, release token and advice rpm framework
to try to autosuspend on operation end.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
---
drivers/misc/mei/client.c | 84 +++++++++++++++++++++++++++++++++++++++--------
1 file changed, 71 insertions(+), 13 deletions(-)
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 36eca54..0c70459 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -18,6 +18,7 @@
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
#include <linux/mei.h>
@@ -415,6 +416,10 @@ void mei_host_client_init(struct work_struct *work)
dev->reset_count = 0;
mutex_unlock(&dev->device_lock);
+
+ pm_runtime_mark_last_busy(&dev->pdev->dev);
+ dev_dbg(&dev->pdev->dev, "rpm: autosuspend\n");
+ pm_runtime_autosuspend(&dev->pdev->dev);
}
/**
@@ -425,6 +430,12 @@ void mei_host_client_init(struct work_struct *work)
*/
bool mei_hbuf_acquire(struct mei_device *dev)
{
+ if (mei_pg_state(dev) == MEI_PG_ON ||
+ dev->pg_event == MEI_PG_EVENT_WAIT) {
+ dev_dbg(&dev->pdev->dev, "device is in pg\n");
+ return false;
+ }
+
if (!dev->hbuf_is_ready) {
dev_dbg(&dev->pdev->dev, "hbuf is not ready\n");
return false;
@@ -460,9 +471,18 @@ int mei_cl_disconnect(struct mei_cl *cl)
if (cl->state != MEI_FILE_DISCONNECTING)
return 0;
+ rets = pm_runtime_get(&dev->pdev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(&dev->pdev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ return rets;
+ }
+
cb = mei_io_cb_init(cl, NULL);
- if (!cb)
- return -ENOMEM;
+ if (!cb) {
+ rets = -ENOMEM;
+ goto free;
+ }
cb->fop_type = MEI_FOP_CLOSE;
if (mei_hbuf_acquire(dev)) {
@@ -494,8 +514,7 @@ int mei_cl_disconnect(struct mei_cl *cl)
cl_err(dev, cl, "wrong status client disconnect.\n");
if (err)
- cl_dbg(dev, cl, "wait failed disconnect err=%08x\n",
- err);
+ cl_dbg(dev, cl, "wait failed disconnect err=%d\n", err);
cl_err(dev, cl, "failed to disconnect from FW client.\n");
}
@@ -503,6 +522,10 @@ int mei_cl_disconnect(struct mei_cl *cl)
mei_io_list_flush(&dev->ctrl_rd_list, cl);
mei_io_list_flush(&dev->ctrl_wr_list, cl);
free:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(&dev->pdev->dev);
+ pm_runtime_put_autosuspend(&dev->pdev->dev);
+
mei_io_cb_free(cb);
return rets;
}
@@ -557,6 +580,13 @@ int mei_cl_connect(struct mei_cl *cl, struct file *file)
dev = cl->dev;
+ rets = pm_runtime_get(&dev->pdev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(&dev->pdev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ return rets;
+ }
+
cb = mei_io_cb_init(cl, file);
if (!cb) {
rets = -ENOMEM;
@@ -596,6 +626,10 @@ int mei_cl_connect(struct mei_cl *cl, struct file *file)
rets = cl->status;
out:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(&dev->pdev->dev);
+ pm_runtime_put_autosuspend(&dev->pdev->dev);
+
mei_io_cb_free(cb);
return rets;
}
@@ -713,23 +747,32 @@ int mei_cl_read_start(struct mei_cl *cl, size_t length)
return -ENOTTY;
}
+ rets = pm_runtime_get(&dev->pdev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(&dev->pdev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ return rets;
+ }
+
cb = mei_io_cb_init(cl, NULL);
- if (!cb)
- return -ENOMEM;
+ if (!cb) {
+ rets = -ENOMEM;
+ goto out;
+ }
/* always allocate at least client max message */
length = max_t(size_t, length, dev->me_clients[i].props.max_msg_length);
rets = mei_io_cb_alloc_resp_buf(cb, length);
if (rets)
- goto err;
+ goto out;
cb->fop_type = MEI_FOP_READ;
if (mei_hbuf_acquire(dev)) {
if (mei_hbm_cl_flow_control_req(dev, cl)) {
- cl_err(dev, cl, "flow control send failed\n");
rets = -ENODEV;
- goto err;
+ goto out;
}
+
list_add_tail(&cb->list, &dev->read_list.list);
} else {
list_add_tail(&cb->list, &dev->ctrl_wr_list.list);
@@ -737,9 +780,14 @@ int mei_cl_read_start(struct mei_cl *cl, size_t length)
cl->read_cb = cb;
- return rets;
-err:
- mei_io_cb_free(cb);
+out:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(&dev->pdev->dev);
+ pm_runtime_put_autosuspend(&dev->pdev->dev);
+
+ if (rets)
+ mei_io_cb_free(cb);
+
return rets;
}
@@ -776,7 +824,7 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
return rets;
if (rets == 0) {
- cl_dbg(dev, cl, "No flow control credentials: not sending.\n");
+ cl_dbg(dev, cl, "No flow control credentials: not sending.\n");
return 0;
}
@@ -856,6 +904,12 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
cl_dbg(dev, cl, "mei_cl_write %d\n", buf->size);
+ rets = pm_runtime_get(&dev->pdev->dev);
+ if (rets < 0 && rets != -EINPROGRESS) {
+ pm_runtime_put_noidle(&dev->pdev->dev);
+ cl_err(dev, cl, "rpm: get failed %d\n", rets);
+ return rets;
+ }
cb->fop_type = MEI_FOP_WRITE;
cb->buf_idx = 0;
@@ -926,6 +980,10 @@ out:
rets = buf->size;
err:
+ cl_dbg(dev, cl, "rpm: autosuspend\n");
+ pm_runtime_mark_last_busy(&dev->pdev->dev);
+ pm_runtime_put_autosuspend(&dev->pdev->dev);
+
return rets;
}
--
1.8.5.3
next prev parent reply other threads:[~2014-03-18 20:53 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-18 20:51 [char-misc-next 00/13] mei: add runtime pm Tomas Winkler
2014-03-18 20:51 ` [char-misc-next 01/13] mei: implement power gating isolation hbm layer Tomas Winkler
2014-03-18 20:51 ` [char-misc-next 02/13] mei: me: introduce power gating registers Tomas Winkler
2014-03-18 20:51 ` [char-misc-next 03/13] mei: me: add power gating isolation register write wrappers Tomas Winkler
2014-03-18 20:51 ` [char-misc-next 04/13] mei: condition PGI support on HW and HBM version Tomas Winkler
2014-03-18 20:51 ` [char-misc-next 05/13] mei: expose hardware power gating state to mei layer Tomas Winkler
2014-03-18 20:52 ` [char-misc-next 06/13] mei: me: add pg exit and entry flow commands Tomas Winkler
2014-03-18 20:52 ` [char-misc-next 07/13] mei: add function to check write queues Tomas Winkler
2014-03-18 20:52 ` [char-misc-next 08/13] mei: me: add runtime pm framework Tomas Winkler
2014-03-18 20:52 ` [char-misc-next 09/13] mei: txe: " Tomas Winkler
2014-03-18 20:52 ` Tomas Winkler [this message]
2014-03-18 20:52 ` [char-misc-next 11/13] mei: me: use runtime PG pm domain for non wakeable devices Tomas Winkler
2014-03-18 20:52 ` [char-misc-next 12/13] mei: txe: " Tomas Winkler
2014-03-18 20:52 ` [char-misc-next 13/13] mei: me: bump hbm version to 1.1 to support power gating Tomas Winkler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395175927-10562-11-git-send-email-tomas.winkler@intel.com \
--to=tomas.winkler@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®