mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: <jiel@marvell.com>
To: <akpm@linux-foundation.org>, <joe@perches.com>, <tj@kernel.org>,
	<fweisbec@gmail.com>, <paul.gortmaker@windriver.com>,
	<keescook@chromium.org>
Cc: <linux-kernel@vger.kernel.org>, <jiel@marvell.com>
Subject: [PATCH v2] printk: fix one circular lockdep warning about console_lock
Date: Thu, 20 Mar 2014 14:26:12 +0800	[thread overview]
Message-ID: <1395296772-27087-1-git-send-email-jiel@marvell.com> (raw)

From: Jane Li <jiel@marvell.com>

This patch tries to fix a warning about possible circular locking
dependency.

If do in following sequence:
    enter suspend ->  resume ->  plug-out CPUx (echo 0 > cpux/online)
lockdep will show warning as following:

======================================================
[ INFO: possible circular locking dependency detected ]
3.10.0 #2 Tainted: G           O
-------------------------------------------------------
sh/1271 is trying to acquire lock:
(console_lock){+.+.+.}, at: [<c06ebf7c>] console_cpu_notify+0x20/0x2c
but task is already holding lock:
(cpu_hotplug.lock){+.+.+.}, at: [<c012b4e8>] cpu_hotplug_begin+0x2c/0x58
which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:
-> #2 (cpu_hotplug.lock){+.+.+.}:
[<c017bb7c>] lock_acquire+0x98/0x12c
[<c06f5014>] mutex_lock_nested+0x50/0x3d8
[<c012b4e8>] cpu_hotplug_begin+0x2c/0x58
[<c06ebfac>] _cpu_up+0x24/0x154
[<c06ec140>] cpu_up+0x64/0x84
[<c0981834>] smp_init+0x9c/0xd4
[<c0973880>] kernel_init_freeable+0x78/0x1c8
[<c06e7f40>] kernel_init+0x8/0xe4
[<c010eec8>] ret_from_fork+0x14/0x2c

-> #1 (cpu_add_remove_lock){+.+.+.}:
[<c017bb7c>] lock_acquire+0x98/0x12c
[<c06f5014>] mutex_lock_nested+0x50/0x3d8
[<c012b758>] disable_nonboot_cpus+0x8/0xe8
[<c016b83c>] suspend_devices_and_enter+0x214/0x448
[<c016bc54>] pm_suspend+0x1e4/0x284
[<c016bdcc>] try_to_suspend+0xa4/0xbc
[<c0143848>] process_one_work+0x1c4/0x4fc
[<c0143f80>] worker_thread+0x138/0x37c
[<c014aaf8>] kthread+0xa4/0xb0
[<c010eec8>] ret_from_fork+0x14/0x2c

-> #0 (console_lock){+.+.+.}:
[<c017b5d0>] __lock_acquire+0x1b38/0x1b80
[<c017bb7c>] lock_acquire+0x98/0x12c
[<c01288c4>] console_lock+0x54/0x68
[<c06ebf7c>] console_cpu_notify+0x20/0x2c
[<c01501d4>] notifier_call_chain+0x44/0x84
[<c012b448>] __cpu_notify+0x2c/0x48
[<c012b5b0>] cpu_notify_nofail+0x8/0x14
[<c06e81bc>] _cpu_down+0xf4/0x258
[<c06e8344>] cpu_down+0x24/0x40
[<c06e921c>] store_online+0x30/0x74
[<c03b7298>] dev_attr_store+0x18/0x24
[<c025fc5c>] sysfs_write_file+0x16c/0x19c
[<c0207a98>] vfs_write+0xb4/0x190
[<c0207e58>] SyS_write+0x3c/0x70
[<c010ee00>] ret_fast_syscall+0x0/0x48

Chain exists of:
   console_lock --> cpu_add_remove_lock --> cpu_hotplug.lock

Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
lock(cpu_hotplug.lock);
                               lock(cpu_add_remove_lock);
                               lock(cpu_hotplug.lock);
lock(console_lock);
  *** DEADLOCK ***

There are three locks involved in two sequence:
a) pm suspend:
	console_lock (@suspend_console())
	cpu_add_remove_lock (@disable_nonboot_cpus())
	cpu_hotplug.lock (@_cpu_down())
b) Plug-out CPUx:
	cpu_add_remove_lock (@(cpu_down())
	cpu_hotplug.lock (@_cpu_down())
	console_lock (@console_cpu_notify()) => Lockdeps prints warning log.

There should be not real deadlock, as flag of console_suspended can
protect this.

Although console_suspend() releases console_sem, it doesn't tell lockdep
about it. That results in the lockdep warning about circular locking
when doing the following:
  enter suspend ->  resume ->  plug-out CPUx (echo 0 > cpux/online)

Fix the problem by telling lockdep we actually released the semaphore in
console_suspend() and acquired it again in console_resume().

Signed-off-by: Jane Li <jiel@marvell.com>
---
 kernel/printk/printk.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 4dae9cb..e6ada32 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1880,6 +1880,7 @@ void suspend_console(void)
 	console_lock();
 	console_suspended = 1;
 	up(&console_sem);
+	mutex_release(&console_lock_dep_map, 1, _RET_IP_);
 }
 
 void resume_console(void)
@@ -1887,6 +1888,7 @@ void resume_console(void)
 	if (!console_suspend_enabled)
 		return;
 	down(&console_sem);
+	mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);
 	console_suspended = 0;
 	console_unlock();
 }
-- 
1.7.9.5


                 reply	other threads:[~2014-03-20  6:26 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1395296772-27087-1-git-send-email-jiel@marvell.com \
    --to=jiel@marvell.com \
    --cc=akpm@linux-foundation.org \
    --cc=fweisbec@gmail.com \
    --cc=joe@perches.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paul.gortmaker@windriver.com \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®