[PATCH 1/2] usb: gadget: uvc: Switch to monotonic clock for buffer timestamps

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

The wall time clock isn't useful for applications as it can jump around
due to time adjustement. Switch to the monotonic clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/usb/gadget/uvc_queue.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
index 0bb5d50..d4561ba 100644
--- a/drivers/usb/gadget/uvc_queue.c
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -364,6 +364,7 @@ static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 						struct uvc_buffer *buf)
 {
 	struct uvc_buffer *nextbuf;
+	struct timespec ts;
 
 	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
 	     buf->length != buf->bytesused) {
@@ -379,14 +380,11 @@ static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 	else
 		nextbuf = NULL;
 
-	/*
-	 * FIXME: with videobuf2, the sequence number or timestamp fields
-	 * are valid only for video capture devices and the UVC gadget usually
-	 * is a video output device. Keeping these until the specs are clear on
-	 * this aspect.
-	 */
+	ktime_get_ts(&ts);
+
 	buf->buf.v4l2_buf.sequence = queue->sequence++;
-	do_gettimeofday(&buf->buf.v4l2_buf.timestamp);
+	buf->buf.v4l2_buf.timestamp.tv_sec = ts.tv_sec;
+	buf->buf.v4l2_buf.timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
 
 	vb2_set_plane_payload(&buf->buf, 0, buf->bytesused);
 	vb2_buffer_done(&buf->buf, VB2_BUF_STATE_DONE);
-- 
1.8.3.2