From: Kamal Mostafa <kamal@canonical.com>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org,
kernel-team@lists.ubuntu.com
Cc: "Theodore Ts'o" <tytso@mit.edu>, Kamal Mostafa <kamal@canonical.com>
Subject: [PATCH 3.8 26/81] ext4: fix online resize with very large inode tables
Date: Tue, 25 Mar 2014 10:15:39 -0700 [thread overview]
Message-ID: <1395767794-5012-27-git-send-email-kamal@canonical.com> (raw)
In-Reply-To: <1395767794-5012-1-git-send-email-kamal@canonical.com>
3.8.13.20 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit b93c95353413041a8cebad915a8109619f66bcc6 upstream.
If a file system has a large number of inodes per block group, all of
the metadata blocks in a flex_bg may be larger than what can fit in a
single block group. Unfortunately, ext4_alloc_group_tables() in
resize.c was never tested to see if it would handle this case
correctly, and there were a large number of bugs which caused the
following sequence to result in a BUG_ON:
kernel bug at fs/ext4/resize.c:409!
...
call trace:
[<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830
[<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80
[<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00
[<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0
[<ffffffff811b9df2>] ? final_putname+0x22/0x50
[<ffffffff811c1371>] sys_ioctl+0x81/0xa0
[<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b
code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0
rip [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180
This can be reproduced with the following command sequence:
mke2fs -t ext4 -i 4096 /dev/vdd 1G
mount -t ext4 /dev/vdd /vdd
resize2fs /dev/vdd 8G
To fix this, we need to make sure the right thing happens when a block
group's inode table straddles two block groups, which means the
following bugs had to be fixed:
1) Not clearing the BLOCK_UNINIT flag in the second block group in
ext4_alloc_group_tables --- the was proximate cause of the BUG_ON.
2) Incorrectly determining how many block groups contained contiguous
free blocks in ext4_alloc_group_tables().
3) Incorrectly setting the start of the next block range to be marked
in use after a discontinuity in setup_new_flex_group_blocks().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[ kamal: backport to 3.8 (context) ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
fs/ext4/resize.c | 30 +++++++++++++++++++-----------
1 file changed, 19 insertions(+), 11 deletions(-)
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 28d5f2c..d2c12df 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -238,6 +238,7 @@ static int ext4_alloc_group_tables(struct super_block *sb,
ext4_group_t group;
ext4_group_t last_group;
unsigned overhead;
+ __u16 uninit_mask = (flexbg_size > 1) ? ~EXT4_BG_BLOCK_UNINIT : ~0;
BUG_ON(flex_gd->count == 0 || group_data == NULL);
@@ -261,7 +262,7 @@ next_group:
src_group++;
for (; src_group <= last_group; src_group++) {
overhead = ext4_group_overhead_blocks(sb, src_group);
- if (overhead != 0)
+ if (overhead == 0)
last_blk += group_data[src_group - group].blocks_count;
else
break;
@@ -275,8 +276,7 @@ next_group:
ext4_get_group_no_and_offset(sb, start_blk - 1, &group, NULL);
group -= group_data[0].group;
group_data[group].free_blocks_count--;
- if (flexbg_size > 1)
- flex_gd->bg_flags[group] &= ~EXT4_BG_BLOCK_UNINIT;
+ flex_gd->bg_flags[group] &= uninit_mask;
}
/* Allocate inode bitmaps */
@@ -287,22 +287,30 @@ next_group:
ext4_get_group_no_and_offset(sb, start_blk - 1, &group, NULL);
group -= group_data[0].group;
group_data[group].free_blocks_count--;
- if (flexbg_size > 1)
- flex_gd->bg_flags[group] &= ~EXT4_BG_BLOCK_UNINIT;
+ flex_gd->bg_flags[group] &= uninit_mask;
}
/* Allocate inode tables */
for (; it_index < flex_gd->count; it_index++) {
- if (start_blk + EXT4_SB(sb)->s_itb_per_group > last_blk)
+ unsigned int itb = EXT4_SB(sb)->s_itb_per_group;
+ ext4_fsblk_t next_group_start;
+
+ if (start_blk + itb > last_blk)
goto next_group;
group_data[it_index].inode_table = start_blk;
ext4_get_group_no_and_offset(sb, start_blk, &group, NULL);
+ next_group_start = ext4_group_first_block_no(sb, group + 1);
group -= group_data[0].group;
- group_data[group].free_blocks_count -=
- EXT4_SB(sb)->s_itb_per_group;
- if (flexbg_size > 1)
- flex_gd->bg_flags[group] &= ~EXT4_BG_BLOCK_UNINIT;
+ if (start_blk + itb > next_group_start) {
+ flex_gd->bg_flags[group + 1] &= uninit_mask;
+ overhead = start_blk + itb - next_group_start;
+ group_data[group + 1].free_blocks_count -= overhead;
+ itb -= overhead;
+ }
+
+ group_data[group].free_blocks_count -= itb;
+ flex_gd->bg_flags[group] &= uninit_mask;
start_blk += EXT4_SB(sb)->s_itb_per_group;
}
@@ -615,7 +623,7 @@ handle_ib:
if (err)
goto out;
count = group_table_count[j];
- start = group_data[i].block_bitmap;
+ start = (&group_data[i].block_bitmap)[j];
block = start;
}
--
1.8.3.2
next prev parent reply other threads:[~2014-03-25 17:21 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-25 17:15 [3.8.y.z extended stable] Linux 3.8.13.20 stable review Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 01/81] kernel.h: define u8, s8, u32, etc. limits Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 02/81] kernel.h: undef clashing U64_MAX, U32_MAX size limits Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 03/81] ata: enable quirk from jmicron JMB350 for JMB394 Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 04/81] sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 05/81] cgroup: fix locking in cgroup_cfts_commit() Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 06/81] xfs: ensure correct timestamp updates from truncate Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 07/81] ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 08/81] ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 09/81] ASoC: da9055: Fix device registration of PMIC and CODEC devices Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 10/81] ARM: dma-mapping: fix GFP_ATOMIC macro usage Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 11/81] x86: " Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 12/81] SUNRPC: Fix races in xs_nospace() Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 13/81] drm/i915: Add intel_ring_cachline_align() Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 14/81] drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVB Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 15/81] can: kvaser_usb: check number of channels returned by HW Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 16/81] ext4: don't try to modify s_flags if the the file system is read-only Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 17/81] drm/vmwgfx: Fix possible integer overflow Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 18/81] drm/i915/dp: increase native aux defer retry timeout Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 19/81] drm/i915/dp: add native aux defer retry limit Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 20/81] rtlwifi: rtl8192ce: Fix too long disable of IRQs Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 21/81] rtlwifi: Fix incorrect return from rtl_ps_enable_nic() Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 22/81] rtl8187: fix regression on MIPS without coherent DMA Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 23/81] PCI: Enable INTx if BIOS left them disabled Kamal Mostafa
2014-03-25 18:34 ` Bjorn Helgaas
2014-03-25 18:52 ` Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 24/81] cifs: ensure that uncached writes handle unmapped areas correctly Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 25/81] CIFS: Fix too big maxBuf size for SMB3 mounts Kamal Mostafa
2014-03-25 17:15 ` Kamal Mostafa [this message]
2014-03-25 17:15 ` [PATCH 3.8 27/81] ext4: fix online resize with a non-standard blocks per group setting Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 28/81] ext4: don't leave i_crtime.tv_sec uninitialized Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 29/81] ALSA: usb-audio: Add a quirk for Plantronics Gamecom 780 Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 30/81] ALSA: usb-audio: work around KEF X300A firmware bug Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 31/81] avr32: fix missing module.h causing build failure in mimc200/fram.c Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 32/81] avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 use Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 33/81] ARM: 7957/1: add DSB after icache flush in __flush_icache_all() Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 34/81] ACPI / PCI: Fix memory leak in acpi_pci_irq_enable() Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 35/81] ahci: disable NCQ on Samsung pci-e SSDs on macbooks Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 36/81] usb: gadget: bcm63xx_udc: fix build failure on DMA channel code Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 37/81] USB: EHCI: add delay during suspend to prevent erroneous wakeups Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 38/81] USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8 Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 39/81] workqueue: ensure @task is valid across kthread_stop() Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 40/81] cgroup: update cgroup_enable_task_cg_lists() to grab siglock Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 41/81] hwmon: (max1668) Fix writing the minimum temperature Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 42/81] cpufreq: powernow-k8: Initialize per-cpu data-structures properly Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 43/81] ACPI / video: Filter the _BCL table for duplicate brightness values Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 44/81] ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2) optimizations Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 45/81] ARM: 7670/1: fix the memset fix Kamal Mostafa
2014-03-25 17:15 ` [PATCH 3.8 46/81] xtensa: move spill_registers to traps.h Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 47/81] xtensa: clean up stpill_registers Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 48/81] xtensa: introduce spill_registers_kernel macro Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 49/81] dma: ste_dma40: don't dereference free:d descriptor Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 50/81] ARM64: unwind: Fix PC calculation Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 51/81] dm thin: avoid metadata commit if a pool's thin devices haven't changed Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 52/81] ASoC: sta32x: Fix array access overflow Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 53/81] ASoC: wm8770: Fix wrong number of enum items Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 54/81] Input - arizona-haptics: Fix double lock of dapm_mutex Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 55/81] ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 56/81] SELinux: bigendian problems with filename trans rules Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 57/81] quota: Fix race between dqput() and dquot_scan_active() Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 58/81] ASoC: sta32x: Fix cache sync Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 59/81] dm thin: fix the error path for the thin device constructor Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 60/81] qla2xxx: Fix kernel panic on selective retransmission request Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 61/81] ASoC: wm8958-dsp: Fix firmware block loading Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 62/81] i7core_edac: Fix PCI device reference count Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 63/81] i7300_edac: Fix " Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 64/81] ipc,mqueue: remove limits for the amount of system-wide queues Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 65/81] PM / hibernate: Fix restore hang in freeze_processes() Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 66/81] ASoC: da732x: Mark DC offset control registers volatile Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 67/81] dm mpath: fix stalls when handling invalid ioctls Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 68/81] ACPI / processor: Rework processor throttling with work_on_cpu() Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 69/81] USB: serial: ftdi_sio: add id for Z3X Box device Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 70/81] USB: ftdi_sio: add Cressi Leonardo PID Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 71/81] usb: ehci: fix deadlock when threadirqs option is used Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 72/81] ASoC: sta32x: Fix wrong enum for limiter2 release rate Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 73/81] perf/x86: Fix event scheduling Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 74/81] perf: Fix hotplug splat Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 75/81] kvm: x86: fix emulator buffer overflow (CVE-2014-0049) Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 76/81] drm/radeon: print the supported atpx function mask Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 77/81] drm/radeon: fix missing bo reservation Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 78/81] drm/radeon: disable pll sharing for DP on DCE4.1 Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 79/81] powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 80/81] powerpc/crashdump : Fix page frame number check in copy_oldmem_page Kamal Mostafa
2014-03-25 17:16 ` [PATCH 3.8 81/81] arm64: mm: Add double logical invert to pte accessors Kamal Mostafa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395767794-5012-27-git-send-email-kamal@canonical.com \
--to=kamal@canonical.com \
--cc=kernel-team@lists.ubuntu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®