[PATCH 4/5] iio: exynos_adc: do a soft reset in case of timeout

[Naveen Krishna Chatradhi <ch.naveen@samsung.com>]

Do a soft reset software if a timeout happens.
This is applicable only for ADC_V2.

Change-Id: I939eaa06254e0b246dd636df9470f2eb392c2be1
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
---
This change is a part of the patch reviewed at https://lkml.org/lkml/2013/11/5/92

 drivers/iio/adc/exynos_adc.c |   50 ++++++++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 24 deletions(-)

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 4d2467a..805c9f6 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -112,6 +112,30 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev)
 	return (unsigned int)match->data;
 }
 
+static void exynos_adc_hw_init(struct exynos_adc *info)
+{
+	u32 con1, con2;
+
+	if (info->version == ADC_V2) {
+		con1 = ADC_V2_CON1_SOFT_RESET;
+		writel(con1, ADC_V2_CON1(info->regs));
+
+		con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
+			ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
+		writel(con2, ADC_V2_CON2(info->regs));
+
+		/* Enable interrupts */
+		writel(1, ADC_V2_INT_EN(info->regs));
+	} else {
+		/* set default prescaler values and Enable prescaler */
+		con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
+
+		/* Enable 12-bit ADC resolution */
+		con1 |= ADC_V1_CON_RES;
+		writel(con1, ADC_V1_CON(info->regs));
+	}
+}
+
 static int exynos_read_raw(struct iio_dev *indio_dev,
 				struct iio_chan_spec const *chan,
 				int *val,
@@ -149,6 +173,8 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 	timeout = wait_for_completion_timeout
 			(&info->completion, EXYNOS_ADC_TIMEOUT);
 	if (timeout == 0) {
+		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+		exynos_adc_hw_init(info);
 		ret = -ETIMEDOUT;
 	} else {
 		*val = info->value;
@@ -230,30 +256,6 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
 	return 0;
 }
 
-static void exynos_adc_hw_init(struct exynos_adc *info)
-{
-	u32 con1, con2;
-
-	if (info->version == ADC_V2) {
-		con1 = ADC_V2_CON1_SOFT_RESET;
-		writel(con1, ADC_V2_CON1(info->regs));
-
-		con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
-			ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
-		writel(con2, ADC_V2_CON2(info->regs));
-
-		/* Enable interrupts */
-		writel(1, ADC_V2_INT_EN(info->regs));
-	} else {
-		/* set default prescaler values and Enable prescaler */
-		con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
-
-		/* Enable 12-bit ADC resolution */
-		con1 |= ADC_V1_CON_RES;
-		writel(con1, ADC_V1_CON(info->regs));
-	}
-}
-
 static int exynos_adc_probe(struct platform_device *pdev)
 {
 	struct exynos_adc *info = NULL;
-- 
1.7.9.5