From: Joel Fernandes <joelf@ti.com>
To: Tony Lindgren <tony@atomide.com>,
Benoit Cousson <bcousson@baylibre.com>,
Linux OMAP List <linux-omap@vger.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Joel Fernandes <joelf@ti.com>
Subject: [PATCH 02/10] ARM: DRA7xx: hwmod: Add hwmod data for DES IP
Date: Fri, 25 Apr 2014 18:02:40 -0500 [thread overview]
Message-ID: <1398466968-29506-3-git-send-email-joelf@ti.com> (raw)
In-Reply-To: <1398466968-29506-1-git-send-email-joelf@ti.com>
dra7xx SoC has a DES module. Add the required data to hwmod.
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 39 +++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 810c205..24ab160 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -561,6 +561,23 @@ static struct omap_hwmod_class dra7xx_gpio_hwmod_class = {
.rev = 2,
};
+static struct omap_hwmod_class_sysconfig dra7xx_des_sysc = {
+ .rev_offs = 0x0030,
+ .sysc_offs = 0x0034,
+ .syss_offs = 0x0038,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
+ .sysc_fields = &omap_hwmod_sysc_type4,
+};
+
+static struct omap_hwmod_class dra7xx_des_hwmod_class = {
+ .name = "des",
+ .sysc = &dra7xx_des_sysc,
+ .rev = 2,
+};
+
/* gpio dev_attr */
static struct omap_gpio_dev_attr gpio_dev_attr = {
.bank_width = 32,
@@ -750,6 +767,19 @@ static struct omap_hwmod dra7xx_gpio8_hwmod = {
.dev_attr = &gpio_dev_attr,
};
+static struct omap_hwmod dra7xx_des_hwmod = {
+ .name = "des",
+ .class = &dra7xx_des_hwmod_class,
+ .clkdm_name = "l4sec_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+};
+
/*
* 'gpmc' class
*
@@ -2170,6 +2200,14 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_per1 -> des */
+static struct omap_hwmod_ocp_if dra7xx_l4_per1__des = {
+ .master = &dra7xx_l4_per1_hwmod,
+ .slave = &dra7xx_des_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = {
{
.pa_start = 0x50000000,
@@ -2704,6 +2742,7 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per1__uart4,
&dra7xx_l4_per1__uart5,
&dra7xx_l4_per1__uart6,
+ &dra7xx_l4_per1__des,
&dra7xx_l4_per3__usb_otg_ss1,
&dra7xx_l4_per3__usb_otg_ss2,
&dra7xx_l4_per3__usb_otg_ss3,
--
1.7.9.5
next prev parent reply other threads:[~2014-04-25 23:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-25 23:02 [PATCH 00/10] ARM: OMAP: dts and HWMOD entries for crypto modules Joel Fernandes
2014-04-25 23:02 ` [PATCH 01/10] ARM: OMAP: hwmod: Add SYSC offsets for AES IP Joel Fernandes
2014-04-25 23:02 ` Joel Fernandes [this message]
2014-04-25 23:02 ` [PATCH 03/10] ARM: DRA7xx: hwmod: Add hwmod data " Joel Fernandes
2014-04-25 23:02 ` [PATCH 04/10] ARM: DRA7xx: Add hwmod entries for RNG module Joel Fernandes
2014-04-25 23:02 ` [PATCH 05/10] ARM: OMAP4: hwmod: Add hwmod data for AES IP Joel Fernandes
2014-04-25 23:02 ` [PATCH 06/10] ARM: OMAP4: hwmod: add hwmod data for DES IP Joel Fernandes
2014-04-25 23:02 ` [PATCH 07/10] ARM: dts: DRA7: Add DT node " Joel Fernandes
2014-04-26 16:36 ` Sergei Shtylyov
2014-04-28 16:38 ` Joel Fernandes
2014-04-25 23:02 ` [PATCH 08/10] ARM: dts: DRA7: Add DT node for AES IP Joel Fernandes
2014-04-25 23:02 ` [PATCH 09/10] ARM: dts: OMAP4: clk: Add clk node for DES IP Joel Fernandes
2014-05-14 9:04 ` Tero Kristo
2014-04-25 23:02 ` [PATCH 10/10] ARM: dts: OMAP4: Add clock nodes for AES/DES nodes Joel Fernandes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398466968-29506-3-git-send-email-joelf@ti.com \
--to=joelf@ti.com \
--cc=bcousson@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome