From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756687AbaD1QTV (ORCPT ); Mon, 28 Apr 2014 12:19:21 -0400 Received: from top.free-electrons.com ([176.31.233.9]:50077 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932933AbaD1QTR (ORCPT ); Mon, 28 Apr 2014 12:19:17 -0400 From: Alexandre Belloni To: Thierry Reding , Maxime Ripard Cc: linux-pwm@vger.kernel.org, linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni Subject: [PATCHv3 7/7] ARM: sunxi: dt: add PWM support for the cubietruck Date: Mon, 28 Apr 2014 18:17:14 +0200 Message-Id: <1398701834-3719-8-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1398701834-3719-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1398701834-3719-1-git-send-email-alexandre.belloni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Enable the PWM for both PWM channels on the cubietruck. They can be found on connector CN8. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index cb25d3c8da58..0c3bd127a5fd 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -63,6 +63,12 @@ }; }; + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- 1.9.1