From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Sangbeom Kim <sbkim73@samsung.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org
Cc: Sachin Kamat <sachin.kamat@linaro.org>,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>
Subject: [PATCH 2/2] regulator: s2mps11: Allow GPIO 0 to be used as external control on S2MPS14
Date: Wed, 30 Apr 2014 10:40:42 +0200 [thread overview]
Message-ID: <1398847242-9394-2-git-send-email-k.kozlowski@samsung.com> (raw)
In-Reply-To: <1398847242-9394-1-git-send-email-k.kozlowski@samsung.com>
GPIO 0 is a valid GPIO so allow using it as external control for
S2MPS14 regulators.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/regulator/s2mps11.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 6dad0aa74a47..1583d4eaf911 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -412,7 +412,7 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
- else if (s2mps11->ext_control_gpio[rdev_get_id(rdev)])
+ else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
val = S2MPS14_ENABLE_EXT_CONTROL;
else
val = rdev->desc->enable_mask;
@@ -593,9 +593,7 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
"samsung,ext-control-gpios", 0);
- if (!gpio_is_valid(gpio[reg]))
- gpio[reg] = 0;
- else
+ if (gpio_is_valid(gpio[reg]))
dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
gpio[reg], reg, rdata[reg].name);
}
@@ -658,6 +656,12 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!s2mps11->ext_control_gpio)
return -ENOMEM;
+ /*
+ * 0 is a valid GPIO so initialize all GPIO-s to negative value
+ * to indicate that external control won't be used for this regulator.
+ */
+ for (i = 0; i < s2mps11->rdev_num; i++)
+ s2mps11->ext_control_gpio[i] = -EINVAL;
if (!iodev->dev->of_node) {
if (iodev->pdata) {
@@ -687,6 +691,7 @@ common_reg:
config.dev = &pdev->dev;
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mps11;
+ config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
for (i = 0; i < s2mps11->rdev_num; i++) {
struct regulator_dev *regulator;
@@ -697,12 +702,7 @@ common_reg:
config.init_data = rdata[i].init_data;
config.of_node = rdata[i].of_node;
}
-
- if (s2mps11->ext_control_gpio[i]) {
- config.ena_gpio = s2mps11->ext_control_gpio[i];
- config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
- } else
- config.ena_gpio = config.ena_gpio_flags = 0;
+ config.ena_gpio = s2mps11->ext_control_gpio[i];
regulator = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
@@ -713,7 +713,7 @@ common_reg:
goto out;
}
- if (s2mps11->ext_control_gpio[i]) {
+ if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
ret = s2mps14_pmic_enable_ext_control(s2mps11,
regulator);
if (ret < 0) {
--
1.9.1
next prev parent reply other threads:[~2014-04-30 8:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-30 8:40 [PATCH 1/2] regulator: s5m8767: Allow GPIO 0 to be used as external control Krzysztof Kozlowski
2014-04-30 8:40 ` Krzysztof Kozlowski [this message]
2014-05-01 17:53 ` [PATCH 2/2] regulator: s2mps11: Allow GPIO 0 to be used as external control on S2MPS14 Mark Brown
2014-05-01 17:53 ` [PATCH 1/2] regulator: s5m8767: Allow GPIO 0 to be used as external control Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398847242-9394-2-git-send-email-k.kozlowski@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=broonie@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=sachin.kamat@linaro.org \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®