From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933140AbaEFAOl (ORCPT ); Mon, 5 May 2014 20:14:41 -0400 Received: from top.free-electrons.com ([176.31.233.9]:41504 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757203AbaEFAOh (ORCPT ); Mon, 5 May 2014 20:14:37 -0400 From: Gregory CLEMENT To: Mathias Nyman , Greg Kroah-Hartman , Felipe Balbi , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT Cc: Thomas Petazzoni , Ezequiel Garcia , linux-arm-kernel@lists.infradead.org, Lior Amsalem , Tawfik Bayouk , Nadav Haklai , Grant Likely , Rob Herring , devicetree@vger.kernel.org Subject: [PATCH v3 07/20] xhci-platform: Add a new controller using xhci: Armada 38x Date: Tue, 6 May 2014 02:14:02 +0200 Message-Id: <1399335255-589-8-git-send-email-gregory.clement@free-electrons.com> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1399335255-589-1-git-send-email-gregory.clement@free-electrons.com> References: <1399335255-589-1-git-send-email-gregory.clement@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Extend the compatible string list with armada-380-xhci. It is used to describe xhci controller which is in the Armada 38x SoCs. Signed-off-by: Gregory CLEMENT --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 90f8f607d125..a0915941fc25 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -1,7 +1,8 @@ USB xHCI controllers Required properties: - - compatible: should be "generic-xhci" (deprecated: "xhci-platform"). + - compatible: should be one of "generic-xhci", + "marvell,armada-380-xhci" (deprecated: "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. -- 1.8.1.2