From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: "Robin Murphy" <robin.murphy@arm.com>,
"Chen-Yu Tsai" <wens@kernel.org>,
"Johan Jonker" <jbx6244@gmail.com>,
"Heiko Stübner" <heiko@sntech.de>
Cc: Rob Herring <robh+dt@kernel.org>,
"open list:ARM/Rockchip SoC..."
<linux-rockchip@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
pavel@ucw.cz, devicetree@vger.kernel.org
Subject: Re: [PATCH 1/6] arm64: dts: rockchip: rk3399-roc-pc: Fix MMC numbering for LED triggers
Date: Wed, 1 Apr 2020 22:05:53 +0200 [thread overview]
Message-ID: <13d459df-114d-3657-0b97-712c3143fe3c@gmail.com> (raw)
In-Reply-To: <ccf35a92-7005-9c6d-a8a2-c17b714a60bc@arm.com>
On 3/31/20 1:07 PM, Robin Murphy wrote:
> [ +cc LED binding maintainers]
>
> On 2020-03-29 5:36 pm, Chen-Yu Tsai wrote:
>> On Fri, Mar 27, 2020 at 5:58 PM Johan Jonker <jbx6244@gmail.com> wrote:
>>>
>>> Hi Chen-Yu Tsai,
>>>
>>> The led node names need some changes.
>>> 'linux,default-trigger' value does not fit.
>>>
>>> From leds-gpio.yaml:
>>>
>>> patternProperties:
>>> # The first form is preferred, but fall back to just 'led'
>>> anywhere in the
>>> # node name to at least catch some child nodes.
>>> "(^led-[0-9a-f]$|led)":
>>> type: object
>>>
>>> Rename led nodenames to 'led-0' form
>>>
>>> Also include all mail lists found with:
>>> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>>>
>>> devicetree@vger.kernel.org
>>
>> Oops...
>>
>>> If you like change the rest of dts with leds as well...
>>>
>>> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
>>> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
>>> yellow-led:linux,default-trigger:0: 'mmc0' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dt.yaml: leds:
>>> diy-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>> DTC arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
>>> CHECK arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
>>> diy-led:linux,default-trigger:0: 'mmc2' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dt.yaml: leds:
>>> yellow-led:linux,default-trigger:0: 'mmc1' is not one of ['backlight',
>>> 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer',
>>> 'pattern']
>>
>> Maybe we should just get rid of linux,default-trigger then?
>
> In this particular case, I'd say it's probably time to reevaluate the
> rather out-of-date binding. The apparent intent of the
> "linux,default-trigger" property seems to be to describe any trigger
> supported by Linux, so either the binding wants to be kept in sync with
> all the triggers Linux actually supports, or perhaps it should just be
> redefined as a free-form string. FWIW I'd be slightly inclined towards
> the latter, since the schema validator can't know whether the given
> trigger actually corresponds to the correct thing for whatever the LED
I agree. It is possible for LED class drivers to register their private
triggers, so generic bindings cannot use predefined set for validation.
I think that Rob just blindly converted common.txt to yaml and I acked
that but didn't envisage the implications for validation.
All in all, even that list in common.txt didn't include all existing
generic LED triggers.
Best regards,
Jacek Anaszewski
> is physically labelled on the board/case, nor whether the version(s) of
> Linux that people intend to use actually support that trigger (since it
> doesn't have to be the version contemporary with the schema definition),
> so strict validation of this particular property seems to be of limited
> value.
>
> Robin.
>
>>
>> Heiko?
>>
>> ChenYu
>>
>>> make -k ARCH=arm64 dtbs_check
>>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/leds-gpio.yaml
>>>
>>>> From: Chen-Yu Tsai <wens@csie.org>
>>>>
>>>> With SDIO now enabled, the numbering of the existing MMC host
>>>> controllers
>>>> gets incremented by 1, as the SDIO host is the first one.
>>>>
>>>> Increment the numbering of the MMC LED triggers to match.
>>>>
>>>> Fixes: cf3c5397835f ("arm64: dts: rockchip: Enable sdio0 and uart0
>>>> on rk3399-roc-pc-mezzanine")
>>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>>> ---
>>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts | 8 ++++++++
>>>> arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 4 ++--
>>>> 2 files changed, 10 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git
>>>> a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> index 2acb3d500fb9..f0686fc276be 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
>>>> @@ -38,6 +38,10 @@ vcc3v3_pcie: vcc3v3-pcie {
>>>> };
>>>> };
>>>>
>>>> +&diy_led {
>>>> + linux,default-trigger = "mmc2";
>>>> +};
>>>> +
>>>> &pcie_phy {
>>>> status = "okay";
>>>> };
>>>> @@ -91,3 +95,7 @@ &uart0 {
>>>> pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>>>> status = "okay";
>>>> };
>>>> +
>>>> +&yellow_led {
>>>> + linux,default-trigger = "mmc1";
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> index 9f225e9c3d54..bc060ac7972d 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>>>> @@ -70,14 +70,14 @@ work-led {
>>>> linux,default-trigger = "heartbeat";
>>>> };
>>>>
>>>> - diy-led {
>>>> + diy_led: diy-led {
>>>> label = "red:diy";
>>>> gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
>>>> default-state = "off";
>>>> linux,default-trigger = "mmc1";
>>>> };
>>>>
>>>> - yellow-led {
>>>> + yellow_led: yellow-led {
>>>> label = "yellow:yellow-led";
>>>> gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
>>>> default-state = "off";
>>>> --
>>>> 2.25.1
>>>
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>
next prev parent reply other threads:[~2020-04-01 20:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 3:04 [PATCH 0/6] arm64: dts: rockchip: misc. cleanups Chen-Yu Tsai
2020-03-27 3:04 ` [PATCH 1/6] arm64: dts: rockchip: rk3399-roc-pc: Fix MMC numbering for LED triggers Chen-Yu Tsai
2020-03-27 9:58 ` Johan Jonker
2020-03-29 16:36 ` Chen-Yu Tsai
2020-03-31 11:07 ` Robin Murphy
2020-04-01 20:05 ` Jacek Anaszewski [this message]
2020-04-06 9:13 ` Pavel Machek
2020-04-13 5:33 ` Chen-Yu Tsai
2020-03-27 3:04 ` [PATCH 2/6] arm64: dts: rockchip: rk3328: Replace RK805 PMIC node name with "pmic" Chen-Yu Tsai
2020-03-27 12:12 ` Johan Jonker
2020-03-27 12:15 ` Chen-Yu Tsai
2020-03-27 3:04 ` [PATCH 3/6] arm64: dts: rockchip: rk3328: drop non-existent gmac2phy pinmux options Chen-Yu Tsai
2020-03-27 3:04 ` [PATCH 4/6] arm64: dts: rockchip: rk3328: drop #address-cells, #size-cells from grf node Chen-Yu Tsai
2020-03-27 3:04 ` [PATCH 5/6] arm64: dts: rockchip: rk3399: drop #address-cells, #size-cells from pmugrf node Chen-Yu Tsai
2020-03-27 3:04 ` [PATCH 6/6] arm64: dts: rockchip: rk3399: Rename dwc3 device nodes to make dtc happy Chen-Yu Tsai
2020-04-19 11:36 ` [PATCH 0/6] arm64: dts: rockchip: misc. cleanups Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=13d459df-114d-3657-0b97-712c3143fe3c@gmail.com \
--to=jacek.anaszewski@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®