From: Nishanth Menon <nm@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Mike Turquette" <mturquette@linaro.org>,
"Tero Kristo" <t-kristo@ti.com>, Paul <paul@pwsan.com>
Cc: Nishanth Menon <nm@ti.com>, <devicetree@vger.kernel.org>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-omap@vger.kernel.org>
Subject: [PATCH 0/3] ARM: OMAP5+: Support Duty Cycle Correction(DCC)
Date: Fri, 16 May 2014 05:45:57 -0500 [thread overview]
Message-ID: <1400237160-25125-1-git-send-email-nm@ti.com> (raw)
Hi,
This patch series has been carried over in vendor kernel for quiet
few years now.
Unfortunately, it was very recently re-discovered and upstream kernel
is noticed to be broken for OMAP5 1.5GHz - at least we are operating
DPLL at frequency higher than what it was intended to be when CPUFreq
is enabled. Thankfully, with nominal voltage(we dont use AVS yet in
upstream for the mentioned platforms) and margins in trimming, we
have so far not crashed - but I strongly suspect this might be some
boundary case survival.
Verified on the following impacted platforms using 3.15-rc4 based
vendor kernel.
Before:
OMAP5432: http://slexy.org/view/s20cs0qQFg
DRA72x: http://slexy.org/view/s2TXtSa6mH (refused to lock)
DRA75x: http://slexy.org/view/s20AW8MU5c
After:
OMAP5432: http://slexy.org/view/s21iAfWxpu
DRA72x: http://slexy.org/view/s2hwsvGLmC (locks properly)
DRA75x: http://slexy.org/view/s21ehw8WQn
Hopefully, we can get these into some kernel revision in some form.
NOTE: Support for 4470(which is the only other platform requiring
DCC) is not present in upstream kernel and there are no plans to
support that SoC, even if it is added at a later point, support can be
extended as needed.
Series based on v3.15-rc5 tag.
Also available on my tree:
https://github.com/nmenon/linux-2.6-playground/
branch: push/clock/dcc
weblink: https://github.com/nmenon/linux-2.6-playground/commits/push/clock/dcc
Verification:
3.15-rc4 based kernel - DRA75x-evm, 72x-evm, OMAP5uevm
3.15-rc5 - OMAP5uEVM(only one supporting 1.5GHz atm)
Andrii Tseglytskyi (1):
ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC)
Nishanth Menon (2):
clk: dpll: support OMAP5 MPU DPLL that need special handling for
higher frequencies
ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing
with higher frequencies
.../devicetree/bindings/clock/ti/dpll.txt | 1 +
arch/arm/boot/dts/dra7xx-clocks.dtsi | 2 +-
arch/arm/boot/dts/omap54xx-clocks.dtsi | 2 +-
arch/arm/mach-omap2/dpll3xxx.c | 9 +++++++++
drivers/clk/ti/dpll.c | 21 ++++++++++++++++++++
include/linux/clk/ti.h | 4 ++++
6 files changed, 37 insertions(+), 2 deletions(-)
Regards,
Nishanth Menon
--
1.7.9.5
next reply other threads:[~2014-05-16 10:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 10:45 Nishanth Menon [this message]
2014-05-16 10:45 ` [PATCH 1/3] ARM: OMAP5+: dpll: support " Nishanth Menon
2014-05-16 10:45 ` [PATCH 2/3] clk: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies Nishanth Menon
2014-05-16 10:46 ` [PATCH 3/3] ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with " Nishanth Menon
2014-05-23 11:21 ` [PATCH 0/3] ARM: OMAP5+: Support Duty Cycle Correction(DCC) Tero Kristo
2014-05-23 21:07 ` Mike Turquette
2014-05-26 6:32 ` Tero Kristo
2014-05-28 12:49 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400237160-25125-1-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=paul@pwsan.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®