mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tomasz Figa <t.figa@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Mike Turquette <mturquette@linaro.org>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Tushar Behera <tushar.behera@linaro.org>,
	Pankaj Dubey <pankaj.dubey@samsung.com>,
	Rahul Sharma <rahul.sharma@samsung.com>,
	Mark Brown <broonie@kernel.org>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Tomasz Figa <t.figa@samsung.com>
Subject: [PATCH 0/4] Add support for Exynos clock output configuration
Date: Tue, 20 May 2014 18:43:27 +0200	[thread overview]
Message-ID: <1400604211-9447-1-git-send-email-t.figa@samsung.com> (raw)

On all Exynos SoCs there is a dedicated CLKOUT pin that allows many of
internal SoC clocks to be output from the SoC. The hardware structure
of CLKOUT related clocks looks as follows:

	CMU	|---> clock0 --------->	|	PMU	|
		|			|		|
    several	|---> clock1 ---------> |	mux	|
    muxes	|			|	+	|---> CLKOUT
    dividers	|       ...		|	gate	|
    and gates	|			|		|
		|---> clockN ---------> |		|

Since the block responsible for handling the pin is PMU, not CMU,
a separate driver, that binds to PMU node is required and acquires
all input clocks by standard DT clock look-up. This way we don't need
any cross-IP block drivers and cross-driver register sharing or
nodes for fake devices.

To represent the PMU mux/gate clock, generic composite clock is registered.

Tested on Odroid U3, with HSIC/USB hub using CLKOUT as reference clock,
with some additional patches.

Depends on:
[PATCHv5 0/4] Enable usbphy and hsotg for exynos4
(No link, sorry, I could not find it in any archive yet...)
for Exynos4210/4x12 PMU binding and DT nodes.

Changes since RFC v1:
(https://lkml.org/lkml/2014/5/15/506)
 - rebased onto v5 of "Enable usbphy and hsotg for exynos4" series and
   current HEAD of samsung-clk tree,
 - added handling of suspend/resume in the driver,
 - added missing CPU clocks on Exynos4,
 - added CLK_SET_RATE_PARENT to CMU CLKOUT gates on Exynos4,
 - fixed bit field width on Exynos4,
 - added CLKOUT CMU registers of Exynos4 to save/restore list,
 - added CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT to clkout clock,
 - changed the binding to use 1-cell clock specifier to allow extension
   with further PMU clocks in future, if needed.

Tomasz Figa (4):
  clk: samsung: exynos4: Add missing CPU/DMC clock hierarchy
  clk: samsung: exynos4: Add CLKOUT clock hierarchy
  clk: samsung: Add driver to control CLKOUT line on Exynos SoCs
  ARM: dts: exynos: Update PMU node with CLKOUT related data

 .../devicetree/bindings/arm/samsung/pmu.txt        |  30 ++++
 arch/arm/boot/dts/exynos4.dtsi                     |   1 +
 arch/arm/boot/dts/exynos4210.dtsi                  |   9 ++
 arch/arm/boot/dts/exynos4x12.dtsi                  |   6 +
 arch/arm/boot/dts/exynos5250.dtsi                  |   3 +
 arch/arm/boot/dts/exynos5420.dtsi                  |   3 +
 drivers/clk/samsung/Makefile                       |   1 +
 drivers/clk/samsung/clk-exynos-clkout.c            | 153 ++++++++++++++++++
 drivers/clk/samsung/clk-exynos4.c                  | 173 +++++++++++++++++++++
 include/dt-bindings/clock/exynos4.h                |   6 +
 10 files changed, 385 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-exynos-clkout.c

-- 
1.9.3


             reply	other threads:[~2014-05-20 16:43 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-20 16:43 Tomasz Figa [this message]
2014-05-20 16:43 ` [PATCH 1/4] clk: samsung: exynos4: Add missing CPU/DMC clock hierarchy Tomasz Figa
2014-05-20 16:43 ` [PATCH 2/4] clk: samsung: exynos4: Add CLKOUT " Tomasz Figa
2014-05-20 16:43 ` [PATCH 3/4] clk: samsung: Add driver to control CLKOUT line on Exynos SoCs Tomasz Figa
2014-05-22  4:28   ` Tushar Behera
2014-05-22 10:30     ` Tomasz Figa
2014-05-22  5:13   ` Tushar Behera
2014-05-22 10:34     ` Tomasz Figa
2014-05-22 11:44       ` Tushar Behera
2014-05-22 12:01         ` Tomasz Figa
2014-05-22 12:14           ` Tushar Behera
2014-05-22 12:25           ` Sylwester Nawrocki
2014-05-22 12:32             ` Tomasz Figa
2014-05-22 19:20           ` Mark Brown
2014-05-22 12:10         ` Sylwester Nawrocki
2014-05-20 16:43 ` [PATCH 4/4] ARM: dts: exynos: Update PMU node with CLKOUT related data Tomasz Figa
2014-05-22  4:41   ` Tushar Behera
2014-06-18 16:17 [PATCH 0/4] Add support for Exynos clock output configuration Daniel Drake
2014-06-20 10:33 ` Tomasz Figa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400604211-9447-1-git-send-email-t.figa@samsung.com \
    --to=t.figa@samsung.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@linaro.org \
    --cc=pankaj.dubey@samsung.com \
    --cc=rahul.sharma@samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=tomasz.figa@gmail.com \
    --cc=tushar.behera@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®