From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752575AbaEUO3L (ORCPT ); Wed, 21 May 2014 10:29:11 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:44380 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751944AbaEUO3I (ORCPT ); Wed, 21 May 2014 10:29:08 -0400 From: Ivan Khoronzhuk To: , , , , , , , , , CC: , , , , , , , , , , , Ivan Khoronzhuk Subject: [Patch v4 4/5] ARM: dts: keystone: update reset node to work with reset driver Date: Wed, 21 May 2014 17:27:33 +0300 Message-ID: <1400682454-24535-5-git-send-email-ivan.khoronzhuk@ti.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1400682454-24535-1-git-send-email-ivan.khoronzhuk@ti.com> References: <1400682454-24535-1-git-send-email-ivan.khoronzhuk@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The keystone driver requires the next additional properties: "ti,syscon-pll" - syscon register range used to access pll controller registers in order to use reset control registers. "ti,syscon-dev" - syscon register range used to access device state control registers in order to use mux block registers for all watchdogs. "ti,wdt_list" - option to declare what watchdog are used to reboot the SoC, so set "0" WDT as default. Signed-off-by: Ivan Khoronzhuk --- arch/arm/boot/dts/keystone.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 8b899ba..783da60 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -78,7 +78,9 @@ rstctrl: reset-controller { compatible = "ti,keystone-reset"; - reg = <0x023100e8 4>; /* pll reset control reg */ + ti,syscon-pll = <&pllctrl>; + ti,syscon-dev = <&devctrl>; + ti,wdt_list = <0>; }; /include/ "keystone-clocks.dtsi" -- 1.8.3.2