From: Chen-Yu Tsai <wens@csie.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Rob Herring <robh+dt@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Emilio Lopez <emilio@elopez.com.ar>,
Linus Walleij <linus.walleij@linaro.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Luc Verhaegen <libv@skynet.be>
Subject: [PATCH 16/22] pinctrl: sunxi: Add A23 R_PIO controller support
Date: Fri, 23 May 2014 15:51:19 +0800 [thread overview]
Message-ID: <1400831485-28576-17-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1400831485-28576-1-git-send-email-wens@csie.org>
The A23 has a R_PIO pin controller, similar to the one found on the A31 SoC.
Add support for the pins controlled by the R_PIO controller.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/pinctrl/sunxi/Kconfig | 4 +
drivers/pinctrl/sunxi/Makefile | 1 +
drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c | 129 ++++++++++++++++++++++++++++
3 files changed, 134 insertions(+)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 17a4281..3058d32 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -36,4 +36,8 @@ config PINCTRL_SUN8I_A23
def_bool PINCTRL_SUNXI || MACH_SUN8I
select PINCTRL_SUNXI_COMMON
+config PINCTRL_SUN8I_A23_R
+ def_bool PINCTRL_SUNXI || MACH_SUN8I
+ select PINCTRL_SUNXI_COMMON
+
endif
diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
index 850cd50..e797efb 100644
--- a/drivers/pinctrl/sunxi/Makefile
+++ b/drivers/pinctrl/sunxi/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_SUN6I_A31) += pinctrl-sun6i-a31.o
obj-$(CONFIG_PINCTRL_SUN6I_A31_R) += pinctrl-sun6i-a31-r.o
obj-$(CONFIG_PINCTRL_SUN7I_A20) += pinctrl-sun7i-a20.o
obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
+obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
new file mode 100644
index 0000000..ae17888
--- /dev/null
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
@@ -0,0 +1,129 @@
+/*
+ * Allwinner A23 SoCs special pins pinctrl driver.
+ *
+ * Copyright (C) 2014 Chen-Yu Tsai
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * Copyright (C) 2014 Boris Brezillon
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * Copyright (C) 2014 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/reset.h>
+
+#include "pinctrl-sunxi.h"
+
+static const struct sunxi_desc_pin sun8i_a23_r_pins[] = {
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_rsb"), /* SCK */
+ SUNXI_FUNCTION(0x3, "s_twi")), /* SCK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_rsb"), /* SDA */
+ SUNXI_FUNCTION(0x3, "s_twi")), /* SDA */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_uart")), /* TX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_uart")), /* RX */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag")), /* MS */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag")), /* CK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag")), /* DO */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x3, "s_jtag")), /* DI */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_twi")), /* SCK */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_twi")), /* SDA */
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_pwm")),
+ SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
+ SUNXI_FUNCTION(0x0, "gpio_in"),
+ SUNXI_FUNCTION(0x1, "gpio_out")),
+};
+
+static const struct sunxi_pinctrl_desc sun8i_a23_r_pinctrl_data = {
+ .pins = sun8i_a23_r_pins,
+ .npins = ARRAY_SIZE(sun8i_a23_r_pins),
+ .pin_base = PL_BASE,
+};
+
+static int sun8i_a23_r_pinctrl_probe(struct platform_device *pdev)
+{
+ struct reset_control *rstc;
+ int ret;
+
+ rstc = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(rstc)) {
+ dev_err(&pdev->dev, "Reset controller missing\n");
+ return PTR_ERR(rstc);
+ }
+
+ ret = reset_control_deassert(rstc);
+ if (ret)
+ return ret;
+
+ ret = sunxi_pinctrl_init(pdev,
+ &sun8i_a23_r_pinctrl_data);
+
+ if (ret)
+ reset_control_assert(rstc);
+
+ return ret;
+}
+
+static struct of_device_id sun8i_a23_r_pinctrl_match[] = {
+ { .compatible = "allwinner,sun8i-a23-r-pinctrl", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sun8i_a23_r_pinctrl_match);
+
+static struct platform_driver sun8i_a23_r_pinctrl_driver = {
+ .probe = sun8i_a23_r_pinctrl_probe,
+ .driver = {
+ .name = "sun8i-a23-r-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = sun8i_a23_r_pinctrl_match,
+ },
+};
+module_platform_driver(sun8i_a23_r_pinctrl_driver);
+
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
+MODULE_DESCRIPTION("Allwinner A23 R_PIO pinctrl driver");
+MODULE_LICENSE("GPL");
--
2.0.0.rc2
next prev parent reply other threads:[~2014-05-23 8:27 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 7:51 [PATCH 00/21] ARM: sunxi: Introduce Allwinner A23 (sun8i) support Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 01/22] serial: 8250_dw: Add optional reset control support Chen-Yu Tsai
2014-05-23 8:19 ` Arnd Bergmann
2014-05-23 7:51 ` [PATCH 02/22] clk: sunxi: register clock gates with clkdev Chen-Yu Tsai
2014-05-25 18:47 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 03/22] clk: sunxi: add "pll6" to sun6i protected clock list Chen-Yu Tsai
2014-05-25 18:48 ` Maxime Ripard
2014-05-26 4:47 ` Chen-Yu Tsai
2014-05-27 8:32 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 04/22] clk: sunxi: move "ahb_sdram" to " Chen-Yu Tsai
2014-05-25 18:51 ` Maxime Ripard
2014-05-26 9:43 ` Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 05/22] clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 06/22] clk: sunxi: Support factor clocks with N multiplier factor starting from 1 Chen-Yu Tsai
2014-05-25 18:43 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 07/22] clk: sunxi: Fix PLL6 calculation on sun6i Chen-Yu Tsai
2014-05-23 13:09 ` Emilio López
2014-05-23 14:43 ` Chen-Yu Tsai
2014-05-25 18:43 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 08/22] clk: sunxi: Specify number of child clocks for divs clocks Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 09/22] clk: sunxi: Implement A31 PLL6 as a divs clock for 2x output Chen-Yu Tsai
2014-05-25 18:56 ` Maxime Ripard
2014-05-26 3:47 ` Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 10/22] clk: sunxi: Add support for PLL6 pre-divider on AHB1 clock Chen-Yu Tsai
2014-05-25 19:02 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 11/22] ARM: sun6i: DT: Add PLL6 multiple outputs Chen-Yu Tsai
2014-05-25 18:59 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 12/22] ARM: sun6i: DT: Add PLL6 pre-divider clock for AHB1 mux input Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 13/22] clk: sunxi: Add A23 clocks support Chen-Yu Tsai
2014-05-25 19:05 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 14/22] clk: sunxi: Add A23 APB0 support to sun6i-a31-apb0-clk Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 15/22] pinctrl: sunxi: Add A23 PIO controller support Chen-Yu Tsai
2014-05-25 19:08 ` Maxime Ripard
2014-06-17 10:25 ` Chen-Yu Tsai
2014-06-17 14:18 ` Maxime Ripard
2014-05-23 7:51 ` Chen-Yu Tsai [this message]
2014-05-25 19:11 ` [PATCH 16/22] pinctrl: sunxi: Add A23 R_PIO " Maxime Ripard
2014-05-23 7:51 ` [PATCH 17/22] mfd: sun6i-prcm: Add support for Allwinner A23 PRCM Chen-Yu Tsai
2014-05-25 19:14 ` Maxime Ripard
2014-05-26 4:36 ` Chen-Yu Tsai
2014-05-27 8:30 ` Maxime Ripard
2014-05-29 4:23 ` Chen-Yu Tsai
2014-05-29 19:31 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 18/22] ARM: sunxi: Introduce Allwinner A23 support Chen-Yu Tsai
2014-05-25 19:22 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 19/22] ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i) Chen-Yu Tsai
2014-05-25 18:46 ` Maxime Ripard
2014-05-26 9:25 ` Chen-Yu Tsai
2014-05-27 8:34 ` Maxime Ripard
2014-05-23 7:51 ` [PATCH 20/22] ARM: sun8i: Add SMP support for the Allwinner A23 Chen-Yu Tsai
2014-05-25 19:26 ` Maxime Ripard
2014-05-26 3:57 ` Chen-Yu Tsai
2014-05-27 8:09 ` Marc Zyngier
2014-05-23 7:51 ` [PATCH 21/22] ARM: sunxi: Add Allwinner A23 dtsi Chen-Yu Tsai
2014-05-25 19:38 ` Maxime Ripard
2014-05-26 4:02 ` Chen-Yu Tsai
2014-05-23 7:51 ` [PATCH 22/22] ARM: sun8i: dt: Add Ippo-q8h v5 support Chen-Yu Tsai
2014-05-25 19:39 ` Maxime Ripard
2014-05-26 4:23 ` Chen-Yu Tsai
2014-05-27 8:22 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400831485-28576-17-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=boris.brezillon@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=emilio@elopez.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=lee.jones@linaro.org \
--cc=libv@skynet.be \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®