From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752282AbaEWIc6 (ORCPT ); Fri, 23 May 2014 04:32:58 -0400 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:39572 "EHLO mirror2.csie.ntu.edu.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751678AbaEWI1n (ORCPT ); Fri, 23 May 2014 04:27:43 -0400 From: Chen-Yu Tsai To: Greg Kroah-Hartman , Samuel Ortiz , Lee Jones , Maxime Ripard , Rob Herring , Mike Turquette , Emilio Lopez , Linus Walleij Cc: Chen-Yu Tsai , linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Hans de Goede , Boris BREZILLON , Luc Verhaegen Subject: [PATCH 08/22] clk: sunxi: Specify number of child clocks for divs clocks Date: Fri, 23 May 2014 15:51:11 +0800 Message-Id: <1400831485-28576-9-git-send-email-wens@csie.org> X-Mailer: git-send-email 2.0.0.rc2 In-Reply-To: <1400831485-28576-1-git-send-email-wens@csie.org> References: <1400831485-28576-1-git-send-email-wens@csie.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Currently sunxi_divs_clk_setup assumes the number of child clocks to be the same as the number of clock-output-names, and a maximum of SUNXI_DIVS_MAX_QTY child clocks. On sun6i, PLL6 only has 1 child clock, but the parent would be used as well, thereby also having it's own clock-output-names entry. This results in an extra bogus clock being registered. This patch adds an entry for the number of child clocks alongside the data structures for them. Signed-off-by: Chen-Yu Tsai --- drivers/clk/sunxi/clk-sunxi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 6500a1b..6857c6e 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -933,6 +933,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, struct divs_data { const struct factors_data *factors; /* data for the factor clock */ + int ndivs; /* number of children */ struct { u8 fixed; /* is it a fixed divisor? if not... */ struct clk_div_table *table; /* is it a table based divisor? */ @@ -952,6 +953,7 @@ static struct clk_div_table pll6_sata_tbl[] = { static const struct divs_data pll5_divs_data __initconst = { .factors = &sun4i_pll5_data, + .ndivs = 2, .div = { { .shift = 0, .pow = 0, }, /* M, DDR */ { .shift = 16, .pow = 1, }, /* P, other */ @@ -960,6 +962,7 @@ static const struct divs_data pll5_divs_data __initconst = { static const struct divs_data pll6_divs_data __initconst = { .factors = &sun4i_pll6_data, + .ndivs = 2, .div = { { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ { .fixed = 2 }, /* P, other */ @@ -990,7 +993,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, struct clk_fixed_factor *fix_factor; struct clk_divider *divider; void *reg; - int i = 0; + int ndivs = SUNXI_DIVS_MAX_QTY, i = 0; int flags, clkflags; /* Set up factor clock that we will be dividing */ @@ -1013,7 +1016,11 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, * our RAM clock! */ clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT; - for (i = 0; i < SUNXI_DIVS_MAX_QTY; i++) { + /* if number of children known, use it */ + if (data->ndivs) + ndivs = data->ndivs; + + for (i = 0; i < ndivs; i++) { if (of_property_read_string_index(node, "clock-output-names", i, &clk_name) != 0) break; -- 2.0.0.rc2