From: George Cherian <george.cherian@ti.com>
To: <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-omap@vger.kernel.org>
Cc: <gregkh@linuxfoundation.org>, <balbi@ti.com>, <zonque@gmail.com>,
<b-liu@ti.com>, George Cherian <george.cherian@ti.com>
Subject: [PATCH v6 0/5] Add support for SW babble Control
Date: Mon, 26 May 2014 14:50:07 +0530 [thread overview]
Message-ID: <1401096012-6895-1-git-send-email-george.cherian@ti.com> (raw)
Series add support for SW babble control logic found in
new silicon versions of AM335x. Runtime differentiation of
silicon version is done by checking the BABBLE_CTL register.
For newer silicon the register default value read is 0x4 and
for older versions its 0x0.
Patch 1 -> Handle Babble only if MUSB is in HOST mode
Patch 2 -> Convert recover work to delayed work.
Patch 3 -> usb_phy_vbus_(off/_on) are NOPs for am335x PHY
so use usb_phy(_shutdown/_init) in musb_platform_reset()
Patch 4 -> Add return value for musb_platform_reset() in prepration
to support SW babble_ctrl
Patch 5 -> Add and Enable sw babble control for newer silicon
v5 -> v6 : Squash patch 5 and 6 form v5 to avoid build warnings.
v4 -> v5 : Added a debug print before resetting MUSB.
changed a musb_readb to dsps_readb introduced in Patch#5 of v4.
v3 -> v4 : Fixes an issue in gagdet mode - BUS RESET should not
be handled as a BABBLE. Added a check for the same.(Patch #1)
Enable sw babble control properly (Patch #6)
v2 -> v3 : Modify musb_platform_reset() to return zero on success.
George Cherian (5):
usb: musb: core: Handle Babble condition only in HOST mode
usb: musb: core: Convert babble recover work to delayed work
usb: musb: dsps: Call usb_phy(_shutdown/_init) during
musb_platform_reset()
usb: musb: core: Convert the musb_platform_reset to have a return
value.
usb: musb: dsps: Add the sw_babble_control() and Enable for newer
silicon
drivers/usb/musb/musb_core.c | 27 ++++++++------
drivers/usb/musb/musb_core.h | 12 +++---
drivers/usb/musb/musb_dsps.c | 88 ++++++++++++++++++++++++++++++++++++++++++--
drivers/usb/musb/musb_regs.h | 7 ++++
4 files changed, 114 insertions(+), 20 deletions(-)
--
1.8.3.1
next reply other threads:[~2014-05-26 9:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-26 9:20 George Cherian [this message]
2014-05-26 9:20 ` [PATCH v6 1/5] usb: musb: core: Handle Babble condition only in HOST mode George Cherian
2014-06-19 10:44 ` Tony Lindgren
2014-06-19 16:01 ` Felipe Balbi
2014-05-26 9:20 ` [PATCH v6 2/5] usb: musb: core: Convert babble recover work to delayed work George Cherian
2014-05-26 9:20 ` [PATCH v6 3/5] usb: musb: dsps: Call usb_phy(_shutdown/_init) during musb_platform_reset() George Cherian
2014-05-26 9:20 ` [PATCH v6 4/5] usb: musb: core: Convert the musb_platform_reset to have a return value George Cherian
2014-05-26 9:20 ` [PATCH v6 5/5] usb: musb: dsps: Add the sw_babble_control() and Enable for newer silicon George Cherian
2014-06-03 19:00 ` [PATCH v6 0/5] Add support for SW babble Control Bin Liu
2014-06-30 17:30 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401096012-6895-1-git-send-email-george.cherian@ti.com \
--to=george.cherian@ti.com \
--cc=b-liu@ti.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®