From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Haavard Skinnemoen <hskinnemoen@gmail.com>,
Hans-Christian Egtvedt <egtvedt@samfundet.no>,
Bryan Wu <cooloney@gmail.com>, Jingoo Han <jg1.han@samsung.com>,
linux-leds@vger.kernel.org, linux-pwm@vger.kernel.org,
linux-fbdev@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCHv2 12/15] avr32: update defconfig to use the generic PWM framework
Date: Thu, 29 May 2014 01:20:15 +0200 [thread overview]
Message-ID: <1401319218-16772-13-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1401319218-16772-1-git-send-email-alexandre.belloni@free-electrons.com>
Now that all boards have switched to the generic PWM framework, update the
defconfigs to use it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
---
arch/avr32/configs/atngw100_mrmt_defconfig | 5 +++--
arch/avr32/configs/atstk1002_defconfig | 5 +++--
arch/avr32/configs/atstk1003_defconfig | 5 +++--
arch/avr32/configs/atstk1004_defconfig | 5 +++--
arch/avr32/configs/atstk1006_defconfig | 5 +++--
arch/avr32/configs/merisc_defconfig | 5 +++--
6 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
index 9a57da44eb6f..6838781e966f 100644
--- a/arch/avr32/configs/atngw100_mrmt_defconfig
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -56,7 +56,6 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_DATAFLASH=y
CONFIG_BLK_DEV_LOOP=y
-CONFIG_ATMEL_PWM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
@@ -104,8 +103,8 @@ CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=y
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -114,6 +113,8 @@ CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_AT32AP700X=m
CONFIG_DMADEVICES=y
CONFIG_UIO=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 2813dd2b9138..b056820eef33 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -64,7 +64,6 @@ CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=m
# CONFIG_SCSI_PROC_FS is not set
@@ -133,14 +132,16 @@ CONFIG_MMC_TEST=m
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_PWM=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index f8ff3a3baad4..0cd23a303da1 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -53,7 +53,6 @@ CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=m
# CONFIG_SCSI_PROC_FS is not set
@@ -112,14 +111,16 @@ CONFIG_MMC_TEST=m
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_PWM=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 992228e54e38..ac1041f5f85a 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -53,7 +53,6 @@ CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=m
# CONFIG_SCSI_PROC_FS is not set
@@ -111,14 +110,16 @@ CONFIG_MMC_TEST=m
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_PWM=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index b8e698b0d1fa..ea4f670cb995 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -67,7 +67,6 @@ CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=m
# CONFIG_SCSI_PROC_FS is not set
@@ -136,14 +135,16 @@ CONFIG_MMC_TEST=m
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_PWM=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig
index 91df6b2986be..b9ef4cc85d08 100644
--- a/arch/avr32/configs/merisc_defconfig
+++ b/arch/avr32/configs/merisc_defconfig
@@ -55,7 +55,6 @@ CONFIG_MTD_ABSENT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_BLOCK2MTD=y
CONFIG_BLK_DEV_LOOP=y
-CONFIG_ATMEL_PWM=y
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
@@ -103,12 +102,14 @@ CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_PWM=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_PCF8563=y
CONFIG_DMADEVICES=y
CONFIG_UIO=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=m
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_FUSE_FS=y
--
1.9.1
next prev parent reply other threads:[~2014-05-28 23:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-28 23:20 [PATCHv2 00/15] move at91 and avr32 to the PWM framework, remove obsolete drivers Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 01/15] ARM: at91: at91sam9g45: switch to generic PWM framework Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 02/15] ARM: at91: sam9m10g45ek: use generic leds_pwm driver Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 03/15] ARM: at91: at91sam9263: switch to generic PWM framework Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 04/15] ARM: at91: sam9263ek: use generic leds_pwm driver Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 05/15] ARM: at91: at91sam9rl: switch to generic PWM framework Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 06/15] ARM: at91: remove useless at91_pwm_leds() Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 07/15] PWM: atmel: allow building for AVR32 Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 08/15] avr32/at32ap: switch to the generic PWM framework Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 09/15] avr32: MRMT: use generic leds_pwm driver Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 10/15] avr32: merisc: " Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 11/15] avr32: favr-32: use generic pwm_bl driver Alexandre Belloni
2014-05-28 23:20 ` Alexandre Belloni [this message]
2014-05-28 23:20 ` [PATCHv2 13/15] backlight: atmel-pwm-bl: remove obsolete driver Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 14/15] leds: atmel-pwm: " Alexandre Belloni
2014-05-28 23:20 ` [PATCHv2 15/15] misc: atmel_pwm: " Alexandre Belloni
2014-05-28 23:35 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401319218-16772-13-git-send-email-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=cooloney@gmail.com \
--cc=egtvedt@samfundet.no \
--cc=gregkh@linuxfoundation.org \
--cc=hskinnemoen@gmail.com \
--cc=jg1.han@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®