From: "Zhu, Lejun" <lejun.zhu@linux.intel.com>
To: lee.jones@linaro.org, linus.walleij@linaro.org, broonie@kernel.org
Cc: sameo@linux.intel.com, mika.westerberg@linux.intel.com,
gnurou@gmail.com, linux-kernel@vger.kernel.org,
jacob.jun.pan@linux.intel.com, bin.yang@intel.com,
lejun.zhu@linux.intel.com
Subject: [PATCH v5 2/3] mfd: intel_soc_pmic: Crystal Cove support
Date: Tue, 3 Jun 2014 13:26:03 +0800 [thread overview]
Message-ID: <1401773164-30326-3-git-send-email-lejun.zhu@linux.intel.com> (raw)
In-Reply-To: <1401773164-30326-1-git-send-email-lejun.zhu@linux.intel.com>
This patch provides chip-specific support for Crystal Cove. Crystal
Cove is the PMIC in Baytrail-T platform.
Also adds Intel SoC PMIC support to the build files.
Signed-off-by: Yang, Bin <bin.yang@intel.com>
Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com>
---
v2:
- Add regmap_config for Crystal Cove.
v3:
- Convert IRQ config to regmap_irq_chip.
v4:
- Cleanup include files.
- Remove useless init() function.
- Remove useless .label and .init from struct intel_soc_pmic_config.
- Fix various coding style issues.
v5:
- Use CRYSTAL_COVE_IRQ_ prefix for IRQ bits definition.
- Merge build files patch to here.
---
drivers/mfd/Kconfig | 12 +++
drivers/mfd/Makefile | 3 +
drivers/mfd/intel_soc_pmic_crc.c | 158 +++++++++++++++++++++++++++++++++++++++
3 files changed, 173 insertions(+)
create mode 100644 drivers/mfd/intel_soc_pmic_crc.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3383412..d987b71 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -241,6 +241,18 @@ config LPC_SCH
LPC bridge function of the Intel SCH provides support for
System Management Bus and General Purpose I/O.
+config INTEL_SOC_PMIC
+ bool "Support for Intel Atom SoC PMIC"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Select this option to enable support for the PMIC device
+ on some Intel SoC systems. The PMIC provides ADC, GPIO,
+ thermal, charger and related power management functions
+ on these systems.
+
config MFD_INTEL_MSIC
bool "Intel MSIC"
depends on INTEL_SCU_IPC
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2851275..36dda4c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -166,3 +166,6 @@ obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
+
+intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
+obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
new file mode 100644
index 0000000..7107cab
--- /dev/null
+++ b/drivers/mfd/intel_soc_pmic_crc.c
@@ -0,0 +1,158 @@
+/*
+ * intel_soc_pmic_crc.c - Device access for Crystal Cove PMIC
+ *
+ * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <bin.yang@intel.com>
+ * Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include "intel_soc_pmic_core.h"
+
+#define CRYSTAL_COVE_MAX_REGISTER 0xC6
+
+#define CRYSTAL_COVE_REG_IRQLVL1 0x02
+#define CRYSTAL_COVE_REG_MIRQLVL1 0x0E
+
+#define CRYSTAL_COVE_IRQ_PWRSRC 0
+#define CRYSTAL_COVE_IRQ_THRM 1
+#define CRYSTAL_COVE_IRQ_BCU 2
+#define CRYSTAL_COVE_IRQ_ADC 3
+#define CRYSTAL_COVE_IRQ_CHGR 4
+#define CRYSTAL_COVE_IRQ_GPIO 5
+#define CRYSTAL_COVE_IRQ_VHDMIOCP 6
+
+static struct resource gpio_resources[] = {
+ {
+ .name = "GPIO",
+ .start = CRYSTAL_COVE_IRQ_GPIO,
+ .end = CRYSTAL_COVE_IRQ_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource pwrsrc_resources[] = {
+ {
+ .name = "PWRSRC",
+ .start = CRYSTAL_COVE_IRQ_PWRSRC,
+ .end = CRYSTAL_COVE_IRQ_PWRSRC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource adc_resources[] = {
+ {
+ .name = "ADC",
+ .start = CRYSTAL_COVE_IRQ_ADC,
+ .end = CRYSTAL_COVE_IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource thermal_resources[] = {
+ {
+ .name = "THERMAL",
+ .start = CRYSTAL_COVE_IRQ_THRM,
+ .end = CRYSTAL_COVE_IRQ_THRM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource bcu_resources[] = {
+ {
+ .name = "BCU",
+ .start = CRYSTAL_COVE_IRQ_BCU,
+ .end = CRYSTAL_COVE_IRQ_BCU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell crystal_cove_dev[] = {
+ {
+ .name = "crystal_cove_pwrsrc",
+ .num_resources = ARRAY_SIZE(pwrsrc_resources),
+ .resources = pwrsrc_resources,
+ },
+ {
+ .name = "crystal_cove_adc",
+ .num_resources = ARRAY_SIZE(adc_resources),
+ .resources = adc_resources,
+ },
+ {
+ .name = "crystal_cove_thermal",
+ .num_resources = ARRAY_SIZE(thermal_resources),
+ .resources = thermal_resources,
+ },
+ {
+ .name = "crystal_cove_bcu",
+ .num_resources = ARRAY_SIZE(bcu_resources),
+ .resources = bcu_resources,
+ },
+ {
+ .name = "crystal_cove_gpio",
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ .resources = gpio_resources,
+ },
+};
+
+static struct regmap_config crystal_cove_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = CRYSTAL_COVE_MAX_REGISTER,
+ .cache_type = REGCACHE_NONE,
+};
+
+static const struct regmap_irq crystal_cove_irqs[] = {
+ [CRYSTAL_COVE_IRQ_PWRSRC] = {
+ .mask = BIT(CRYSTAL_COVE_IRQ_PWRSRC),
+ },
+ [CRYSTAL_COVE_IRQ_THRM] = {
+ .mask = BIT(CRYSTAL_COVE_IRQ_THRM),
+ },
+ [CRYSTAL_COVE_IRQ_BCU] = {
+ .mask = BIT(CRYSTAL_COVE_IRQ_BCU),
+ },
+ [CRYSTAL_COVE_IRQ_ADC] = {
+ .mask = BIT(CRYSTAL_COVE_IRQ_ADC),
+ },
+ [CRYSTAL_COVE_IRQ_CHGR] = {
+ .mask = BIT(CRYSTAL_COVE_IRQ_CHGR),
+ },
+ [CRYSTAL_COVE_IRQ_GPIO] = {
+ .mask = BIT(CRYSTAL_COVE_IRQ_GPIO),
+ },
+ [CRYSTAL_COVE_IRQ_VHDMIOCP] = {
+ .mask = BIT(CRYSTAL_COVE_IRQ_VHDMIOCP),
+ },
+};
+
+static struct regmap_irq_chip crystal_cove_irq_chip = {
+ .name = "Crystal Cove",
+ .irqs = crystal_cove_irqs,
+ .num_irqs = ARRAY_SIZE(crystal_cove_irqs),
+ .num_regs = 1,
+ .status_base = CRYSTAL_COVE_REG_IRQLVL1,
+ .mask_base = CRYSTAL_COVE_REG_MIRQLVL1,
+};
+
+struct intel_soc_pmic_config intel_soc_pmic_config_crc = {
+ .irq_flags = IRQF_TRIGGER_RISING,
+ .cell_dev = crystal_cove_dev,
+ .n_cell_devs = ARRAY_SIZE(crystal_cove_dev),
+ .regmap_config = &crystal_cove_regmap_config,
+ .irq_chip = &crystal_cove_irq_chip,
+};
--
1.8.3.2
next prev parent reply other threads:[~2014-06-03 5:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-03 5:26 [PATCH v5 0/3] mfd: Intel SoC Power Management IC Zhu, Lejun
2014-06-03 5:26 ` [PATCH v5 1/3] mfd: intel_soc_pmic: Core driver Zhu, Lejun
2014-06-03 8:02 ` Lee Jones
2014-06-03 11:08 ` Mika Westerberg
2014-06-17 15:04 ` Lee Jones
2014-06-03 5:26 ` Zhu, Lejun [this message]
2014-06-03 8:04 ` [PATCH v5 2/3] mfd: intel_soc_pmic: Crystal Cove support Lee Jones
2014-06-03 11:10 ` Mika Westerberg
2014-06-17 15:04 ` Lee Jones
2014-06-03 5:26 ` [PATCH v5 3/3] gpio: Add support for Intel Crystal Cove PMIC Zhu, Lejun
2014-06-17 15:05 ` Lee Jones
2014-06-17 15:07 ` [GIT PULL] LinusW - Immutable branch between MFD and GPIO Lee Jones
2014-06-19 16:03 ` [GIT PULL v2] " Lee Jones
2014-07-07 14:56 ` [GIT PULL] " Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401773164-30326-3-git-send-email-lejun.zhu@linux.intel.com \
--to=lejun.zhu@linux.intel.com \
--cc=bin.yang@intel.com \
--cc=broonie@kernel.org \
--cc=gnurou@gmail.com \
--cc=jacob.jun.pan@linux.intel.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome