From: Janne Kanniainen <janne.kanniainen@gmail.com>
To: cooloney@gmail.com, rpurdie@rpsys.net
Cc: linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
Janne Kanniainen <janne.kanniainen@gmail.com>
Subject: [PATCH v2] leds: USB: Add support for MSI GT683R led panels
Date: Fri, 6 Jun 2014 00:29:06 +0300 [thread overview]
Message-ID: <1402003746-6354-1-git-send-email-janne.kanniainen@gmail.com> (raw)
This driver adds support for USB controlled led panels that exist in MSI GT683R laptop.
Changes in v2:
- sorted headers to alphabetic order
- using devm_kzalloc
- using BIT(n)
- using usb_control_msg instead of usb_submit_urb
- removing unneeded code
Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com>
---
drivers/leds/Kconfig | 6 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-gt683r.c | 158 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 drivers/leds/leds-gt683r.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6de9dfb..2cffa0c 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -487,6 +487,12 @@ config LEDS_BLINKM
This option enables support for the BlinkM RGB LED connected
through I2C. Say Y to enable support for the BlinkM LED.
+config LEDS_GT683R
+ tristate "LED support for the MSI GT683R"
+ depends on LEDS_CLASS && USB
+ help
+ This option enables support for the MSI GT683R LEDS
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 3cd76db..af5fb4e 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
+obj-$(CONFIG_LEDS_GT683R) += leds-gt683r.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-gt683r.c b/drivers/leds/leds-gt683r.c
new file mode 100644
index 0000000..5a204ea
--- /dev/null
+++ b/drivers/leds/leds-gt683r.c
@@ -0,0 +1,158 @@
+/*
+ * MSI GT683R led driver
+ *
+ * Copyright (c) 2014 Janne Kanniainen <janne.kanniainen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#define USB_DEVICE_ID_MSI_GT683R_LED_PANEL 0xff00
+#define USB_VENDOR_ID_MSI 0x1770
+
+#define GT683R_LED_BACK BIT(0)
+#define GT683R_LED_SIDE BIT(1)
+#define GT683R_LED_FRONT BIT(2)
+#define GT683R_LED_ALL (GT683R_LED_BACK | GT683R_LED_SIDE | GT683R_LED_FRONT)
+
+#define GT683R_LED_OFF 0
+#define GT683R_LED_AUDIO 2
+#define GT683R_LED_BREATHING 3
+#define GT683R_LED_NORMAL 5
+
+struct gt683r_led {
+ struct usb_device *usb_dev;
+ struct usb_endpoint_descriptor *ep;
+ struct led_classdev led_dev;
+ struct mutex lock;
+ struct work_struct work;
+ enum led_brightness brightness;
+};
+
+static const struct usb_device_id gt683r_led_id[] = {
+ { USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
+ { }
+};
+
+static const u64 gt683r_led_select_leds = 0x300201ULL;
+static const u64 gt683r_led_select_type = 0x100200201ULL;
+
+static void gt683r_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct gt683r_led *led =
+ container_of(led_cdev, struct gt683r_led, led_dev);
+
+ mutex_lock(&led->lock);
+
+ led->brightness = brightness;
+
+ schedule_work(&led->work);
+}
+
+static int gt683r_led_snd_msg(struct gt683r_led *led, u64 msg)
+{
+ int result = usb_control_msg(led->usb_dev,
+ usb_sndctrlpipe(led->usb_dev,
+ led->ep->bEndpointAddress),
+ 0x09, 0x22, 0x0301, 0x0000,
+ &msg, sizeof(u64), USB_CTRL_SET_TIMEOUT);
+ if (result)
+ dev_err(&led->usb_dev->dev,
+ "Failed to send control message: %i\n", result);
+
+ return result;
+}
+
+static void gt683r_led_set(struct gt683r_led *led, char type)
+{
+ gt683r_led_snd_msg(led, gt683r_led_select_leds |
+ (GT683R_LED_ALL << 24));
+ gt683r_led_snd_msg(led, gt683r_led_select_type |
+ (type << 24));
+}
+
+static void gt683r_led_work(struct work_struct *work)
+{
+ struct gt683r_led *led =
+ container_of(work, struct gt683r_led, work);
+
+ if (led->brightness)
+ gt683r_led_set(led, GT683R_LED_NORMAL);
+ else
+ gt683r_led_set(led, GT683R_LED_OFF);
+
+ mutex_unlock(&led->lock);
+}
+
+static struct led_classdev gt683r_led_dev = {
+ .name = "gt683r-led",
+ .brightness_set = gt683r_brightness_set,
+ .max_brightness = 1,
+ .flags = LED_CORE_SUSPENDRESUME,
+};
+
+static int gt683r_led_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret = 0;
+ struct gt683r_led *led =
+ devm_kzalloc(&intf->dev, sizeof(struct gt683r_led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->usb_dev = interface_to_usbdev(intf);
+ usb_set_intfdata(intf, led);
+
+ led->ep = &led->usb_dev->ep0.desc;
+ if (!usb_endpoint_xfer_control(led->ep) ||
+ usb_endpoint_maxp(led->ep) != sizeof(u64))
+ return -EINVAL;
+
+ led->led_dev = gt683r_led_dev;
+ ret = led_classdev_register(&led->usb_dev->dev, &led->led_dev);
+ if (ret) {
+ dev_err(&led->usb_dev->dev, "Could not register led_classdev\n");
+ return ret;
+ }
+
+ mutex_init(&led->lock);
+ INIT_WORK(&led->work, gt683r_led_work);
+
+ return 0;
+}
+
+static void gt683r_led_disconnect(struct usb_interface *intf)
+{
+ struct gt683r_led *led = usb_get_intfdata(intf);
+
+ led_classdev_unregister(&led->led_dev);
+ cancel_work_sync(&led->work);
+}
+
+static struct usb_driver gt683r_led_driver = {
+ .probe = gt683r_led_probe,
+ .disconnect = gt683r_led_disconnect,
+ .name = "GT683R Led Driver",
+ .id_table = gt683r_led_id,
+};
+
+module_usb_driver(gt683r_led_driver);
+
+MODULE_AUTHOR("Janne Kanniainen");
+MODULE_DESCRIPTION("MSI GT683R led driver");
+MODULE_LICENSE("GPL");
--
1.9.2
next reply other threads:[~2014-06-05 21:29 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-05 21:29 Janne Kanniainen [this message]
2014-06-06 9:47 ` Johan Hovold
2014-06-07 10:12 ` Janne Kanniainen
2014-06-09 11:42 ` Johan Hovold
2014-06-10 21:10 ` Janne Kanniainen
2014-06-10 21:21 ` [PATCH v3] leds: USB: HID: " Janne Kanniainen
2014-06-11 11:25 ` Jiri Kosina
2014-06-11 14:06 ` Johan Hovold
2014-06-11 14:05 ` Johan Hovold
2014-06-11 15:30 ` Johan Hovold
2014-06-11 17:34 ` Johan Hovold
2014-06-11 22:48 ` [PATCH v4] " Janne Kanniainen
2014-06-12 9:06 ` Johan Hovold
2014-06-12 20:34 ` [PATCH v5] " Janne Kanniainen
2014-06-13 7:54 ` Johan Hovold
2014-06-13 17:19 ` Janne Kanniainen
2014-06-15 14:59 ` Janne Kanniainen
2014-06-16 7:39 ` Johan Hovold
2014-06-16 17:23 ` [PATCH v6] " Janne Kanniainen
2014-06-16 22:01 ` Janne Kanniainen
2014-06-17 13:46 ` Johan Hovold
2014-06-17 16:41 ` [PATCH v8] " Janne Kanniainen
2014-06-18 7:39 ` Johan Hovold
2014-06-18 16:05 ` [PATCH v9] " Janne Kanniainen
2014-06-18 16:11 ` Johan Hovold
2014-06-18 18:41 ` Janne Kanniainen
2014-06-18 18:46 ` Johan Hovold
2014-06-18 22:10 ` Jiri Kosina
2014-06-23 14:35 ` Oliver Neukum
2014-06-23 14:42 ` Johan Hovold
2014-06-23 16:17 ` Greg KH
2014-06-23 17:16 ` [PATCH v10] " Janne Kanniainen
2014-06-23 17:27 ` Johan Hovold
2014-06-23 18:23 ` Greg KH
2014-06-23 18:24 ` Greg KH
2014-06-23 19:31 ` Johan Hovold
2014-06-23 19:40 ` Greg KH
2014-06-23 19:52 ` Johan Hovold
2014-06-23 20:24 ` Greg KH
2014-06-23 20:44 ` Johan Hovold
2014-06-24 13:10 ` Bjørn Mork
2014-06-24 14:50 ` Johan Hovold
2014-06-24 19:38 ` [PATCH 1/2] HID: leds: fix race condition in MSI GT683R driver Janne Kanniainen
2014-06-24 19:38 ` [PATCH 2/2] HID: leds: move led_mode attribute to led-class devices " Janne Kanniainen
2014-06-24 19:56 ` Greg KH
2014-06-25 11:55 ` Johan Hovold
2014-06-25 15:59 ` [PATCH 2/2 v2] HID: leds: Use attribute-groups " Janne Kanniainen
2014-06-25 17:41 ` Johan Hovold
2014-06-25 18:13 ` [PATCH 2/2 v3] HID: leds: move led_mode attribute to led-class devices " Janne Kanniainen
2014-06-30 10:39 ` Johan Hovold
2014-07-01 17:50 ` [PATCH 2/2 v4] " Janne Kanniainen
2014-07-01 20:16 ` Johan Hovold
2014-07-02 17:37 ` [PATCH 2/2 v5] " Janne Kanniainen
2014-07-03 8:28 ` Johan Hovold
2014-07-03 17:17 ` [PATCH 1/2 v6] HID: gt683r: fix race condition Janne Kanniainen
2014-07-03 17:17 ` [PATCH 2/2 v6] HID: gt683r: move mode attribute to led-class devices Janne Kanniainen
2014-07-03 17:40 ` Johan Hovold
2014-07-03 18:17 ` Bryan Wu
2014-07-03 18:28 ` Janne Kanniainen
2014-07-03 17:34 ` [PATCH 1/2 v6] HID: gt683r: fix race condition Johan Hovold
2014-07-03 18:13 ` Bryan Wu
2014-06-25 19:09 ` [PATCH 2/2 v2] HID: leds: Use attribute-groups in MSI GT683R driver Jiri Kosina
2014-06-25 22:55 ` Bryan Wu
2014-06-30 10:47 ` Johan Hovold
2014-06-30 11:33 ` Jiri Kosina
2014-06-30 23:17 ` Bryan Wu
2014-07-01 8:48 ` Johan Hovold
2014-07-01 15:48 ` Bryan Wu
2014-07-01 17:53 ` Janne Kanniainen
2014-07-02 8:56 ` Jiri Kosina
2014-06-23 16:20 ` [PATCH v9] leds: USB: HID: Add support for MSI GT683R led panels Janne Kanniainen
2014-06-14 22:42 ` [PATCH v5] " Pavel Machek
2014-06-14 23:23 ` Janne Kanniainen
2014-06-16 7:45 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402003746-6354-1-git-send-email-janne.kanniainen@gmail.com \
--to=janne.kanniainen@gmail.com \
--cc=cooloney@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®