From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752174AbaFJNrY (ORCPT ); Tue, 10 Jun 2014 09:47:24 -0400 Received: from top.free-electrons.com ([176.31.233.9]:55303 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750777AbaFJNrW (ORCPT ); Tue, 10 Jun 2014 09:47:22 -0400 From: Boris BREZILLON To: Wolfram Sang Cc: Randy Dunlap , Maxime Ripard , Hans de Goede , Shuge , kevin@allwinnertech.com, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, Boris BREZILLON Subject: [PATCH v5 0/2] i2c: sunxi: add P2WI controller support Date: Tue, 10 Jun 2014 15:47:14 +0200 Message-Id: <1402408036-5235-1-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 1.8.3.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello, This series adds support for the P2WI block used by some Allwinner boards to interface with the AXP221 PMIC. Best Regards, Boris Changes since v4: - add P2WI protocol description in driver header comment - remove unneeded i2c address check - remove unneeded irq field from p2wi struct Changes since v3: - update the DT bindings doc - fix a comment that was no longer true Changes since v2: - drop the initialization (switch from I2C to P2WI mode) part - print devm_ioremap_resource err code Boris BREZILLON (2): i2c: sunxi: add P2WI DT bindings documentation i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support .../devicetree/bindings/i2c/i2c-sunxi-p2wi.txt | 41 +++ drivers/i2c/busses/Kconfig | 12 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-sun6i-p2wi.c | 356 +++++++++++++++++++++ 4 files changed, 410 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt create mode 100644 drivers/i2c/busses/i2c-sun6i-p2wi.c -- 1.8.3.2