From: Chander Kashyap <k.chander@samsung.com>
To: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, daniel.lezcano@linaro.org,
lorenzo.pieralisi@arm.com, rjw@rjwysocki.net,
kgene.kim@samsung.com, tomasz.figa@gmail.com,
Chander Kashyap <chander.kashyap@linaro.org>,
Chander Kashyap <k.chander@samsung.com>
Subject: [Patch v7 6/6] mcpm: exynos: populate suspend and powered_up callbacks
Date: Mon, 16 Jun 2014 15:56:23 +0530 [thread overview]
Message-ID: <1402914383-20471-7-git-send-email-k.chander@samsung.com> (raw)
In-Reply-To: <1402914383-20471-1-git-send-email-k.chander@samsung.com>
From: Chander Kashyap <chander.kashyap@linaro.org>
In order to support cpuidle through mcpm, suspend and powered-up
callbacks are required in mcpm platform code.
Hence populate the same callbacks.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Chander Kashyap <k.chander@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
Changes in v6: None
Changes in v5:
1. Add comment to address cache access while c-bit is cleared in SCLTR
2. Make exynos_powered_up static
Changes in v4: None
Changes in v3:
1. Removed coherency enablement after suspend failure.
2. Use generic function to poweron cpu.
changes in v2:
1. Fixed typo: enynos_pmu_cpunr to exynos_pmu_cpunr
arch/arm/mach-exynos/mcpm-exynos.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index 0498d0b..fc47e68 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -258,10 +258,46 @@ static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
return -ETIMEDOUT; /* timeout */
}
+static void exynos_powered_up(void)
+{
+ unsigned int mpidr, cpu, cluster;
+
+ mpidr = read_cpuid_mpidr();
+ cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+ cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+
+ arch_spin_lock(&exynos_mcpm_lock);
+ if (cpu_use_count[cpu][cluster] == 0)
+ cpu_use_count[cpu][cluster] = 1;
+ arch_spin_unlock(&exynos_mcpm_lock);
+}
+
+static void exynos_suspend(u64 residency)
+{
+ unsigned int mpidr, cpunr;
+
+ exynos_power_down();
+
+ /*
+ * Execution reaches here only if cpu did not power down.
+ * Hence roll back the changes done in exynos_power_down function.
+ *
+ * CAUTION: "This function requires the stack data to be visible through
+ * power down and can only be executed on processors like A15 and A7
+ * that hit the cache with the C bit clear in the SCTLR register."
+ */
+ mpidr = read_cpuid_mpidr();
+ cpunr = exynos_pmu_cpunr(mpidr);
+
+ exynos_cpu_power_up(cpunr);
+}
+
static const struct mcpm_platform_ops exynos_power_ops = {
.power_up = exynos_power_up,
.power_down = exynos_power_down,
.wait_for_powerdown = exynos_wait_for_powerdown,
+ .suspend = exynos_suspend,
+ .powered_up = exynos_powered_up,
};
static void __init exynos_mcpm_usage_count_init(void)
--
1.7.9.5
next prev parent reply other threads:[~2014-06-16 10:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-16 10:26 [Patch v7 0/6] add cpuidle support for Exynos5420 Chander Kashyap
2014-06-16 10:26 ` [Patch v7 1/6] driver: cpuidle-big-little: add of_device_id structure Chander Kashyap
2014-06-16 10:26 ` [Patch v7 2/6] arm: exynos: add generic function to calculate cpu number Chander Kashyap
2014-06-16 10:26 ` [Patch v7 3/6] cpuidle: config: Add ARCH_EXYNOS entry to select cpuidle-big-little driver Chander Kashyap
2014-06-16 10:26 ` [Patch v7 4/6] driver: cpuidle: cpuidle-big-little: init driver for Exynos5420 Chander Kashyap
2014-06-16 10:26 ` [Patch v7 5/6] exynos: cpuidle: do not allow cpuidle registration " Chander Kashyap
2014-06-16 10:26 ` Chander Kashyap [this message]
2014-07-01 11:52 ` [Patch v7 0/6] add cpuidle support " Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402914383-20471-7-git-send-email-k.chander@samsung.com \
--to=k.chander@samsung.com \
--cc=chander.kashyap@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=rjw@rjwysocki.net \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®