mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: lee.jones@linaro.org, sbkim73@samsung.com, sameo@linux.intel.com,
	broonie@kernel.org
Cc: myungjoo.ham@samsung.com, kyungmin.park@samsung.com,
	linux-kernel@vger.kernel.org,
	Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCHv8 3/4] dt-bindings: mfd: s2mps11: Add support S2MPU02 PMIC
Date: Wed, 25 Jun 2014 16:14:46 +0900	[thread overview]
Message-ID: <1403680487-12141-4-git-send-email-cw00.choi@samsung.com> (raw)
In-Reply-To: <1403680487-12141-1-git-send-email-cw00.choi@samsung.com>

This patch add documentation for S2MPU02 PMIC device. S2MPU02 has a little
difference from S2MPS11/S2MPS14 PMIC and has LDO[1-28]/Buck[1-7].

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 Documentation/devicetree/bindings/mfd/s2mps11.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index d81ba30..f7c9180 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
 
-* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
 
 The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
 addressed by the host system using different I2C slave addresses.
 
 Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
+              or "samsung,s2mpu02-pmic".
 - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
 
 Optional properties:
@@ -81,11 +82,13 @@ as per the datasheet of s2mps11.
 		  - valid values for n are:
 			- S2MPS11: 1 to 38
 			- S2MPS14: 1 to 25
+			- S2MPU02: 1 to 28
 		  - Example: LDO1, LD02, LDO28
 	- BUCKn
 		  - valid values for n are:
 			- S2MPS11: 1 to 10
 			- S2MPS14: 1 to 5
+			- S2MPU02: 1 to 7
 		  - Example: BUCK1, BUCK2, BUCK9
 
 Example:
-- 
1.8.0


  parent reply	other threads:[~2014-06-25  7:15 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-25  7:14 [PATCHv8 0/4] mfd: sec-core: Add support S2MPU02 PMIC device Chanwoo Choi
2014-06-25  7:14 ` [PATCHv8 1/4] mfd: sec-core: Add support for S2MPU02 device Chanwoo Choi
2014-07-01 14:00   ` Lee Jones
2014-06-25  7:14 ` [PATCHv8 2/4] regulator: s2mps11: Add support S2MPU02 regulator device Chanwoo Choi
2014-07-01 14:02   ` Lee Jones
2014-06-25  7:14 ` Chanwoo Choi [this message]
2014-06-25  7:14 ` [PATCHv8 4/4] mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption Chanwoo Choi
2014-07-01 14:04   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403680487-12141-4-git-send-email-cw00.choi@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=broonie@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=sameo@linux.intel.com \
    --cc=sbkim73@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®