From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>
Cc: <nm@ti.com>, <rnayak@ti.com>, <balbi@ti.com>, <nsekhar@ti.com>,
<kishon@ti.com>, <george.cherian@ti.com>,
<linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Roger Quadros <rogerq@ti.com>
Subject: [PATCH] ARM: DRA7-evm: Enable SATA PHY and USB PHY power supplies
Date: Wed, 25 Jun 2014 15:56:36 +0300 [thread overview]
Message-ID: <1403700996-27105-1-git-send-email-rogerq@ti.com> (raw)
The SATA and USB PHYs need the 1.8V and 3.3V supplies.
The PHY drivers/framework don't yet support regulator
supply so we have to keep these regulators always-on till
then.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/dra7-evm.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 4adc280..99a1f79 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -241,6 +241,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
+ regulator-always-on;
};
ldo9_reg: ldo9 {
@@ -266,6 +267,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
+ regulator-always-on;
};
};
};
--
1.8.3.2
next reply other threads:[~2014-06-25 12:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 12:56 Roger Quadros [this message]
2014-06-25 22:27 ` Nishanth Menon
2014-06-26 7:31 ` Tony Lindgren
2014-06-26 9:36 ` Roger Quadros
2014-06-26 14:22 ` Roger Quadros
2014-06-26 15:06 ` Tero Kristo
2014-06-30 7:55 ` Roger Quadros
2014-07-02 11:51 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403700996-27105-1-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=george.cherian@ti.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®