From: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>,
Mike Turquette <mturquette@linaro.org>
Cc: linux-kernel@vger.kernel.org, Manuel Lauss <manuel.lauss@gmail.com>
Subject: [RFC PATCH v2 07/11] MIPS: Alchemy: irda: use clk framework
Date: Thu, 3 Jul 2014 15:22:38 +0200 [thread overview]
Message-ID: <1404393762-858019-8-git-send-email-manuel.lauss@gmail.com> (raw)
In-Reply-To: <1404393762-858019-1-git-send-email-manuel.lauss@gmail.com>
Test the existence of the irda_clk clock object, use it to en/dis-
able it when date is being transferred.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
---
drivers/net/irda/au1k_ir.c | 48 ++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 46 insertions(+), 2 deletions(-)
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 5f91e3e..aab2cf7 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -18,6 +18,7 @@
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/interrupt.h>
@@ -175,6 +176,7 @@ struct au1k_private {
struct resource *ioarea;
struct au1k_irda_platform_data *platdata;
+ struct clk *irda_clk;
};
static int qos_mtt_bits = 0x07; /* 1 ms or more */
@@ -514,9 +516,39 @@ static irqreturn_t au1k_irda_interrupt(int dummy, void *dev_id)
static int au1k_init(struct net_device *dev)
{
struct au1k_private *aup = netdev_priv(dev);
- u32 enable, ring_address;
+ u32 enable, ring_address, phyck;
+ struct clk *c;
int i;
+ c = clk_get(NULL, "irda_clk");
+ if (IS_ERR(c))
+ return PTR_ERR(c);
+ i = clk_prepare_enable(c);
+ if (i) {
+ clk_put(c);
+ return i;
+ }
+
+ switch (clk_get_rate(c)) {
+ case 40000000:
+ phyck = IR_PHYCLK_40MHZ;
+ break;
+ case 48000000:
+ phyck = IR_PHYCLK_48MHZ;
+ break;
+ case 56000000:
+ phyck = IR_PHYCLK_56MHZ;
+ break;
+ case 64000000:
+ phyck = IR_PHYCLK_64MHZ;
+ break;
+ default:
+ clk_disable_unprepare(c);
+ clk_put(c);
+ return -EINVAL;
+ }
+ aup->irda_clk = c;
+
enable = IR_HC | IR_CE | IR_C;
#ifndef CONFIG_CPU_LITTLE_ENDIAN
enable |= IR_BE;
@@ -545,7 +577,7 @@ static int au1k_init(struct net_device *dev)
irda_write(aup, IR_RING_SIZE,
(RING_SIZE_64 << 8) | (RING_SIZE_64 << 12));
- irda_write(aup, IR_CONFIG_2, IR_PHYCLK_48MHZ | IR_ONE_PIN);
+ irda_write(aup, IR_CONFIG_2, phyck | IR_ONE_PIN);
irda_write(aup, IR_RING_ADDR_CMPR, 0);
au1k_irda_set_speed(dev, 9600);
@@ -619,6 +651,9 @@ static int au1k_irda_stop(struct net_device *dev)
free_irq(aup->irq_tx, dev);
free_irq(aup->irq_rx, dev);
+ clk_disable_unprepare(aup->irda_clk);
+ clk_put(aup->irda_clk);
+
return 0;
}
@@ -853,6 +888,7 @@ static int au1k_irda_probe(struct platform_device *pdev)
struct au1k_private *aup;
struct net_device *dev;
struct resource *r;
+ struct clk *c;
int err;
dev = alloc_irdadev(sizeof(struct au1k_private));
@@ -886,6 +922,14 @@ static int au1k_irda_probe(struct platform_device *pdev)
if (!aup->ioarea)
goto out;
+ /* bail out early if clock doesn't exist */
+ c = clk_get(NULL, "irda_clk");
+ if (IS_ERR(c)) {
+ err = PTR_ERR(c);
+ goto out;
+ }
+ clk_put(c);
+
aup->iobase = ioremap_nocache(r->start, resource_size(r));
if (!aup->iobase)
goto out2;
--
2.0.0
next prev parent reply other threads:[~2014-07-03 13:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-03 13:22 [RFC PATCH v2 00/11] MIPS: Alchemy: clock framework support Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 01/11] MIPS: Alchemy: au1000 header file cleanup Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 02/11] MIPS: Alchemy: clock framework integration of onchip clocks Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 03/11] MIPS: Alchemy: platform: use clk framework for uarts Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 04/11] MIPS: Alchemy: usb: use clk framework Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 05/11] MIPS: Alchemy: pci: use clk framework to enable PCI clock Manuel Lauss
2014-07-03 13:50 ` Sergei Shtylyov
2014-07-03 17:19 ` Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 06/11] MIPS: Alchemy: db1200: use clk framework Manuel Lauss
2014-07-03 13:22 ` Manuel Lauss [this message]
2014-07-03 13:22 ` [RFC PATCH v2 08/11] MIPS: Alchemy: au1100fb: " Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 09/11] MIPS: Alchemy: au1200fb: " Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 10/11] MIPS: Alchemy: au1xmmc: " Manuel Lauss
2014-07-03 13:22 ` [RFC PATCH v2 11/11] MIPS: Alchemy: remove old clock support Manuel Lauss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404393762-858019-8-git-send-email-manuel.lauss@gmail.com \
--to=manuel.lauss@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=mturquette@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®