From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: linux@maxim.org.za, Nicolas Ferre <nicolas.ferre@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
dwmw2@infradead.org, dbaryshkov@gmail.com
Cc: Boris Brezillon <boris@free-electrons.com>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
Thomas Petazzoni <thomas@free-electrons.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH 18/18] AT91: Remove rstc and shdwc headers
Date: Thu, 3 Jul 2014 16:15:05 +0200 [thread overview]
Message-ID: <1404396906-25194-33-git-send-email-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <1404396906-25194-1-git-send-email-maxime.ripard@free-electrons.com>
These headers used to provide an "API" to access the rstc and shdwc registers.
Now that no-one uses this API anymore, we can safely remove those.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/mach-at91/at91_rstc.h | 53 ---------------------------------
arch/arm/mach-at91/at91_shdwc.h | 50 -------------------------------
arch/arm/mach-at91/at91sam9260.c | 1 -
arch/arm/mach-at91/at91sam9261.c | 1 -
arch/arm/mach-at91/at91sam9263.c | 1 -
arch/arm/mach-at91/at91sam9rl.c | 1 -
arch/arm/mach-at91/board-sam9260ek.c | 1 -
arch/arm/mach-at91/board-sam9261ek.c | 1 -
arch/arm/mach-at91/board-sam9263ek.c | 1 -
arch/arm/mach-at91/board-sam9m10g45ek.c | 1 -
arch/arm/mach-at91/board-sam9rlek.c | 1 -
arch/arm/mach-at91/setup.c | 1 -
12 files changed, 113 deletions(-)
delete mode 100644 arch/arm/mach-at91/at91_rstc.h
delete mode 100644 arch/arm/mach-at91/at91_shdwc.h
diff --git a/arch/arm/mach-at91/at91_rstc.h b/arch/arm/mach-at91/at91_rstc.h
deleted file mode 100644
index a600e6992920..000000000000
--- a/arch/arm/mach-at91/at91_rstc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_rstc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_rstc_base;
-
-#define at91_rstc_read(field) \
- __raw_readl(at91_rstc_base + field)
-
-#define at91_rstc_write(field, value) \
- __raw_writel(value, at91_rstc_base + field)
-#else
-.extern at91_rstc_base
-#endif
-
-#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */
-#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
-#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
-#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
-
-#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */
-#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
-#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
-#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
-#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
-#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
-#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
-#define AT91_RSTC_RSTTYP_USER (4 << 8)
-#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
-#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */
-#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
-#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
-#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
-
-#endif
diff --git a/arch/arm/mach-at91/at91_shdwc.h b/arch/arm/mach-at91/at91_shdwc.h
deleted file mode 100644
index 9e29f31ec9a6..000000000000
--- a/arch/arm/mach-at91/at91_shdwc.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_shdwc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_shdwc_base;
-
-#define at91_shdwc_read(field) \
- __raw_readl(at91_shdwc_base + field)
-
-#define at91_shdwc_write(field, value) \
- __raw_writel(value, at91_shdwc_base + field)
-#endif
-
-#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
-#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */
-#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
-
-#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
-#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
-#define AT91_SHDW_WKMODE0_NONE 0
-#define AT91_SHDW_WKMODE0_HIGH 1
-#define AT91_SHDW_WKMODE0_LOW 2
-#define AT91_SHDW_WKMODE0_ANYLEVEL 3
-#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */
-#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
-#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
-#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
-#define AT91_SHDW_RTCWKEN (1 << 17) /* Real Time Clock Wake-up Enable */
-
-#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
-#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
-#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
-#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
-
-#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 16dd13800b1f..624fe15ec352 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -25,7 +25,6 @@
#include <mach/hardware.h>
#include "at91_aic.h"
-#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 2c8553e63785..f115f4709021 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -24,7 +24,6 @@
#include <mach/hardware.h>
#include "at91_aic.h"
-#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 63a47c7d7f2b..08e0f4ec7d11 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -23,7 +23,6 @@
#include <mach/hardware.h>
#include "at91_aic.h"
-#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index ea9ac0ee0895..d6ad162b9a88 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -24,7 +24,6 @@
#include <mach/hardware.h>
#include "at91_aic.h"
-#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
#include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index da9c5f1f2c49..18f49c93f3f3 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -45,7 +45,6 @@
#include <mach/system_rev.h>
#include "at91_aic.h"
-#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d1be10b09ab3..5a23e7211203 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -49,7 +49,6 @@
#include <mach/system_rev.h>
#include "at91_aic.h"
-#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3f613d962d9b..e2aa41d19fc1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -48,7 +48,6 @@
#include <mach/system_rev.h>
#include "at91_aic.h"
-#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 33a7b19f7400..e7d793b7601e 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -46,7 +46,6 @@
#include <mach/system_rev.h>
#include "at91_aic.h"
-#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 262e3f957d9f..5cb82464be1a 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -35,7 +35,6 @@
#include "at91_aic.h"
-#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index eb2b922a4adb..61d0b96c31e9 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -22,7 +22,6 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
-#include "at91_shdwc.h"
#include "soc.h"
#include "generic.h"
#include "pm.h"
--
2.0.1
next prev parent reply other threads:[~2014-07-03 14:20 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-03 14:14 [PATCH 00/18] AT91: cleanup of the reset and poweroff code Maxime Ripard
2014-07-03 14:14 ` [PATCH 01/18] power: reset: Add if statement isntead of multiple depends on Maxime Ripard
2014-07-03 14:14 ` [PATCH 02/18] AT91: setup: Switch to pr_fmt Maxime Ripard
2014-07-03 14:14 ` [PATCH 03/18] AT91: G45: DT: Declare a second ram controller Maxime Ripard
2014-07-03 14:14 ` [PATCH 04/18] AT91: Rework ramc mapping code Maxime Ripard
2014-07-03 14:34 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-03 14:53 ` Maxime Ripard
2014-07-03 14:14 ` [PATCH 04/18] AT91: SAMA5D3: DT: Add shutdown controller Maxime Ripard
2014-07-03 14:14 ` [PATCH 05/18] " Maxime Ripard
2014-07-03 14:14 ` [PATCH 05/18] power: reset: Add AT91 reset driver Maxime Ripard
2014-07-03 14:39 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-03 14:59 ` Maxime Ripard
2014-07-04 2:40 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-04 8:57 ` Maxime Ripard
2014-07-04 3:08 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-04 7:14 ` Boris BREZILLON
2014-07-04 9:06 ` Maxime Ripard
2014-07-07 18:40 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-08 8:08 ` Maxime Ripard
2014-07-08 8:12 ` Maxime Ripard
2014-07-03 14:14 ` [PATCH 06/18] AT91: DT: Remove the old-style reset probing Maxime Ripard
2014-07-03 14:14 ` [PATCH 06/18] power: reset: Add AT91 reset driver Maxime Ripard
2014-07-03 14:14 ` [PATCH 07/18] AT91: DT: Remove the old-style reset probing Maxime Ripard
2014-07-03 14:14 ` [PATCH 07/18] AT91: soc: Introduce register_devices callback Maxime Ripard
2014-07-03 14:14 ` [PATCH 08/18] AT91: Probe the reset driver Maxime Ripard
2014-07-03 14:14 ` [PATCH 08/18] AT91: soc: Introduce register_devices callback Maxime Ripard
2014-07-03 14:14 ` [PATCH 09/18] AT91: Call at91_register_devices in the board files Maxime Ripard
2014-07-03 14:29 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-03 14:52 ` Maxime Ripard
2014-07-07 18:42 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-08 8:06 ` Maxime Ripard
2014-07-03 14:14 ` [PATCH 09/18] AT91: Probe the reset driver Maxime Ripard
2014-07-03 14:14 ` [PATCH 10/18] AT91: Call at91_register_devices in the board files Maxime Ripard
2014-07-03 14:14 ` [PATCH 10/18] AT91: Remove reset code the machine code Maxime Ripard
2014-07-03 14:14 ` [PATCH 11/18] " Maxime Ripard
2014-07-03 14:14 ` [PATCH 11/18] power: reset: Add AT91 poweroff driver Maxime Ripard
2014-07-03 14:14 ` [PATCH 12/18] AT91: DT: Remove poweroff DT probing Maxime Ripard
2014-07-03 14:14 ` [PATCH 12/18] power: reset: Add AT91 poweroff driver Maxime Ripard
2014-07-03 14:31 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-03 14:53 ` Maxime Ripard
2014-07-03 14:14 ` [PATCH 13/18] AT91: DT: Remove poweroff DT probing Maxime Ripard
2014-07-03 14:14 ` [PATCH 13/18] AT91: Register the poweroff driver Maxime Ripard
2014-07-03 14:14 ` [PATCH 14/18] " Maxime Ripard
2014-07-03 14:14 ` [PATCH 14/18] AT91: Remove poweroff code Maxime Ripard
2014-07-03 14:14 ` [PATCH 15/18] AT91: pm: Remove show_reset_status function Maxime Ripard
2014-07-03 14:15 ` [PATCH 15/18] AT91: Remove poweroff code Maxime Ripard
2014-07-03 14:15 ` [PATCH 16/18] AT91: pm: Remove show_reset_status function Maxime Ripard
2014-07-03 14:15 ` [PATCH 16/18] AT91: Remove rstc and shdwnc global base addresses Maxime Ripard
2014-07-03 14:15 ` [PATCH 17/18] AT91: Remove rstc and shdwc headers Maxime Ripard
2014-07-03 14:15 ` [PATCH 17/18] AT91: Remove rstc and shdwnc global base addresses Maxime Ripard
2014-07-03 14:15 ` Maxime Ripard [this message]
2014-07-03 14:15 ` [PATCH 18/18] AT91: Rework ramc mapping code Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404396906-25194-33-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=boris@free-electrons.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@maxim.org.za \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=thomas@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®