From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Yadwinder Singh Brar <yadi.brar01@gmail.com>,
Tushar Behera <trblinux@gmail.com>,
Andreas Farber <afaerber@suse.de>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v6 02/23] mfd: max77686: Add power management support
Date: Fri, 4 Jul 2014 11:55:01 +0200 [thread overview]
Message-ID: <1404467722-26687-3-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1404467722-26687-1-git-send-email-javier.martinez@collabora.co.uk>
The driver doesn't have PM operations defined so add a suspend
and resume function handlers to allow the PMIC IRQ to wakeup
the system when it is put into a sleep state.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/mfd/max77686.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index 3cb41d0..a38e9ee 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -240,10 +240,50 @@ static const struct i2c_device_id max77686_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, max77686_i2c_id);
+#ifdef CONFIG_PM_SLEEP
+static int max77686_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(max77686->irq);
+
+ /*
+ * IRQ must be disabled during suspend because if it happens
+ * while suspended it will be handled before resuming I2C.
+ *
+ * When device is woken up from suspend (e.g. by RTC wake alarm),
+ * an interrupt occurs before resuming I2C bus controller.
+ * Interrupt handler tries to read registers but this read
+ * will fail because I2C is still suspended.
+ */
+ disable_irq(max77686->irq);
+
+ return 0;
+}
+
+static int max77686_resume(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(max77686->irq);
+
+ enable_irq(max77686->irq);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(max77686_pm, max77686_suspend, max77686_resume);
+
static struct i2c_driver max77686_i2c_driver = {
.driver = {
.name = "max77686",
.owner = THIS_MODULE,
+ .pm = &max77686_pm,
.of_match_table = of_match_ptr(max77686_pmic_dt_match),
},
.probe = max77686_i2c_probe,
--
2.0.0.rc2
next prev parent reply other threads:[~2014-07-04 9:55 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 9:54 [PATCH v6 00/23] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 01/23] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-07-04 9:55 ` Javier Martinez Canillas [this message]
2014-07-04 10:51 ` [PATCH v6 02/23] mfd: max77686: Add power management support Krzysztof Kozlowski
2014-07-04 9:55 ` [PATCH v6 03/23] mfd: max77686: Don't define dummy function if OF isn't enabled Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 04/23] mfd: max77686: Make platform data over-rule DT Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 05/23] mfd: max77686: Return correct error when pdata isn't found Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 06/23] mfd: max77686: Make error checking consistent Javier Martinez Canillas
2014-07-04 10:54 ` Krzysztof Kozlowski
2014-07-04 9:55 ` [PATCH v6 07/23] mfd: max77686: Remove unneeded OOM error message Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 08/23] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support Javier Martinez Canillas
2014-07-04 11:15 ` Krzysztof Kozlowski
2014-07-04 11:32 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 09/23] rtc: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 10/23] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 11/23] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 12/23] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 13/23] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 14/23] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 15/23] regulator: max77686: Setup DVS-related GPIOs on probe Javier Martinez Canillas
2014-07-10 10:08 ` amit daniel kachhap
2014-07-10 13:25 ` Lee Jones
2014-07-11 2:03 ` Javier Martinez Canillas
2014-07-11 9:31 ` amit daniel kachhap
2014-07-04 9:55 ` [PATCH v6 16/23] mfd: max77686: Add documentation for DVS bindings Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 17/23] mfd: max77686: Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 11:30 ` Krzysztof Kozlowski
2014-07-04 11:35 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 18/23] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 19/23] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 20/23] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 21/23] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 22/23] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-07-04 11:56 ` Krzysztof Kozlowski
2014-07-04 12:52 ` Javier Martinez Canillas
2014-07-04 13:11 ` Krzysztof Kozlowski
2014-07-04 13:23 ` Javier Martinez Canillas
2014-07-04 9:55 ` [PATCH v6 23/23] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404467722-26687-3-git-send-email-javier.martinez@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=a.zummo@towertech.it \
--cc=afaerber@suse.de \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=tomeu.vizoso@collabora.com \
--cc=trblinux@gmail.com \
--cc=yadi.brar01@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®