From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760626AbaGEFq6 (ORCPT ); Sat, 5 Jul 2014 01:46:58 -0400 Received: from seketeli.net ([94.23.218.202]:45920 "EHLO ms.seketeli.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760573AbaGEFq5 (ORCPT ); Sat, 5 Jul 2014 01:46:57 -0400 From: Apelete Seketeli To: Felipe Balbi , Greg Kroah-Hartman , linux-usb@vger.kernel.org Cc: Lars-Peter Clausen , linux-kernel@vger.kernel.org Subject: [PATCH] Register NOP tranciever driver in JZ4740 musb glue layer Date: Sat, 5 Jul 2014 07:47:24 +0200 Message-Id: <1404539245-9211-1-git-send-email-apelete@seketeli.net> X-Mailer: git-send-email 1.7.10.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello, The name of the NOP transceiver driver was changed during v3.16 release cycle from usb_phy_gen_xceiv to usb_phy_generic. The patch that comes as a follow up of this message registers the NOP transceiver driver before calling usb_get_phy() to avoid issues related to accessing its data structure while it was not registered. For notice, I updated corresponding platform data to rename NOP transceiver used for JZ4740 in a patch sent today to linux-mips. Changes were rebased on top of the linux-usb master branch, built and tested successfully. The following changes since commit 80235c4: Merge tag 'v3.16-rc2' are available in the git repository at: git://git.seketeli.net/~apelete/linux-usb.git register-jz4740-phy Apelete Seketeli (1): usb: musb: register nop transceiver driver for jz4740 drivers/usb/musb/jz4740.c | 3 +++ 1 file changed, 3 insertions(+) -- 1.7.10.4