mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 1/5] memory: add a driver for atmel ram controllers
Date: Mon,  7 Jul 2014 17:19:11 +0200	[thread overview]
Message-ID: <1404746355-19988-2-git-send-email-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <1404746355-19988-1-git-send-email-alexandre.belloni@free-electrons.com>

Atmel SoCs have one or multiple RAM controllers that need one or multiple clocks
to run.
This driver handle those clocks.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 .../devicetree/bindings/arm/atmel-at91.txt         |  1 +
 drivers/memory/Kconfig                             |  8 ++
 drivers/memory/Makefile                            |  1 +
 drivers/memory/atmel-ramc.c                        | 96 ++++++++++++++++++++++
 4 files changed, 106 insertions(+)
 create mode 100644 drivers/memory/atmel-ramc.c

diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 16f60b41c147..54dc3aefb12a 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -61,6 +61,7 @@ RAMC SDRAM/DDR Controller required properties:
 - compatible: Should be "atmel,at91rm9200-sdramc",
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
+			"atmel,sama5d3-mpddramc",
 - reg: Should contain registers location and length
   For at91sam9263 and at91sam9g45 you must specify 2 entries.
 
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index c59e9c96e86d..e49b9caa1b30 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -7,6 +7,14 @@ menuconfig MEMORY
 
 if MEMORY
 
+config ATMEL_RAMC
+	bool "Atmel (Multi-port DDR-)SDRAM Controller"
+	default y
+	depends on ARCH_AT91 && OF
+	help
+	  This driver is for Atmel SDRAM Controller or Atmel Multi-port
+	  DDR-SDRAM Controller available on Atmel AT91SAM9 and SAMA5 SoCs
+
 config TI_AEMIF
 	tristate "Texas Instruments AEMIF driver"
 	depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 71160a2b7313..eb5d7716efa4 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -5,6 +5,7 @@
 ifeq ($(CONFIG_DDR),y)
 obj-$(CONFIG_OF)		+= of_memory.o
 endif
+obj-$(CONFIG_ATMEL_RAMC)	+= atmel-ramc.o
 obj-$(CONFIG_TI_AEMIF)		+= ti-aemif.o
 obj-$(CONFIG_TI_EMIF)		+= emif.o
 obj-$(CONFIG_FSL_IFC)		+= fsl_ifc.o
diff --git a/drivers/memory/atmel-ramc.c b/drivers/memory/atmel-ramc.c
new file mode 100644
index 000000000000..1d12d3d01cbd
--- /dev/null
+++ b/drivers/memory/atmel-ramc.c
@@ -0,0 +1,96 @@
+/*
+ * Atmel (Multi-port DDR-)SDRAM Controller driver
+ *
+ * Copyright (C) 2014 Atmel
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+struct at91_ramc_caps {
+	bool has_ddrck;
+	bool has_mpddr_clk;
+};
+
+static const struct at91_ramc_caps at91rm9200_caps = { };
+
+static const struct at91_ramc_caps at91sam9g45_caps = {
+	.has_ddrck = 1,
+	.has_mpddr_clk = 0,
+};
+
+static const struct at91_ramc_caps sama5d3_caps = {
+	.has_ddrck = 1,
+	.has_mpddr_clk = 1,
+};
+
+static const struct of_device_id atmel_ramc_of_match[] = {
+	{ .compatible = "atmel,at91rm9200-sdramc", .data = &at91rm9200_caps, },
+	{ .compatible = "atmel,at91sam9260-sdramc", .data = &at91rm9200_caps, },
+	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &at91sam9g45_caps, },
+	{ .compatible = "atmel,sama5d3-mpddramc", .data = &sama5d3_caps, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, atmel_ramc_of_match);
+
+static int atmel_ramc_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct at91_ramc_caps *caps;
+	struct clk *clk;
+
+	match = of_match_device(atmel_ramc_of_match, &pdev->dev);
+	caps = match->data;
+
+	if (caps->has_ddrck) {
+		clk = devm_clk_get(&pdev->dev, "ddrck");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+		clk_prepare_enable(clk);
+	}
+
+	if (caps->has_mpddr_clk) {
+		clk = devm_clk_get(&pdev->dev, "mpddr");
+		if (WARN_ON(IS_ERR(clk)))
+			return 0;
+		clk_prepare_enable(clk);
+	}
+
+	return 0;
+}
+
+static struct platform_driver atmel_ramc_driver = {
+	.probe		= atmel_ramc_probe,
+	.driver		= {
+		.name	= "atmel-ramc",
+		.owner	= THIS_MODULE,
+		.of_match_table = atmel_ramc_of_match,
+	},
+};
+
+static int __init atmel_ramc_init(void)
+{
+	return platform_driver_register(&atmel_ramc_driver);
+}
+module_init(atmel_ramc_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Atmel (Multi-port DDR-)SDRAM Controller");
-- 
1.9.1


  reply	other threads:[~2014-07-07 15:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-07 15:19 [PATCH 0/5] Add a driver for the atmel ram controller Alexandre Belloni
2014-07-07 15:19 ` Alexandre Belloni [this message]
2014-07-07 15:46   ` [PATCH 1/5] memory: add a driver for atmel ram controllers Boris BREZILLON
2014-07-07 17:56     ` Alexandre Belloni
2014-07-07 18:33   ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-07 19:44     ` Alexandre Belloni
2014-07-07 15:19 ` [PATCH 2/5] ARM: at91: select ATMEL_RAMC when using OF Alexandre Belloni
2014-07-07 15:19 ` [PATCH 3/5] ARM: at91/dt: sama5d3: define mpddr clock and ramc clocks Alexandre Belloni
2014-07-07 18:32   ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-07 19:55     ` Alexandre Belloni
2014-07-08  7:51       ` Maxime Ripard
2014-07-07 15:19 ` [PATCH 4/5] ARM: at91/dt: at91sam9: use ddrck in ramc Alexandre Belloni
2014-07-07 15:19 ` [PATCH 5/5] clk: at91: remove the useless CLK_IGNORE_UNUSED flag Alexandre Belloni
2014-07-07 17:03 ` [PATCH 0/5] Add a driver for the atmel ram controller Boris BREZILLON

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404746355-19988-2-git-send-email-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@atmel.com \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®