From: Feng Kan <fkan@apm.com>
To: dbaryshkov@gmail.com, catalin.marinas@arm.com,
dwmw2@infradead.org, arnd@arndb.de, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, patches@apm.com
Cc: Feng Kan <fkan@apm.com>
Subject: [PATCH V8 1/6] power: reset: Add generic SYSCON register mapped reset
Date: Tue, 8 Jul 2014 19:15:48 -0700 [thread overview]
Message-ID: <1404872153-3594-2-git-send-email-fkan@apm.com> (raw)
In-Reply-To: <1404872153-3594-1-git-send-email-fkan@apm.com>
Add a generic SYSCON register mapped reset mechanism.
Signed-off-by: Feng Kan <fkan@apm.com>
---
drivers/power/reset/Kconfig | 6 +++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/syscon-reboot.c | 91 +++++++++++++++++++++++++++++++++++++
3 files changed, 98 insertions(+)
create mode 100644 drivers/power/reset/syscon-reboot.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index bdcf517..5877b38 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -80,3 +80,9 @@ config POWER_RESET_KEYSTONE
help
Reboot support for the KEYSTONE SoCs.
+config POWER_RESET_SYSCON
+ bool "Generic SYSCON regmap reset driver"
+ depends on ARM || ARM64 || COMPILE_TEST
+ depends on POWER_RESET && MFD_SYSCON && OF
+ help
+ Reboot support for generic SYSCON mapped register reset.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index dde2e8b..b1b5ab3 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o
obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
+obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
diff --git a/drivers/power/reset/syscon-reboot.c b/drivers/power/reset/syscon-reboot.c
new file mode 100644
index 0000000..9c15ba5
--- /dev/null
+++ b/drivers/power/reset/syscon-reboot.c
@@ -0,0 +1,91 @@
+/*
+ * Generic Syscon Reboot Driver
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/reboot.h>
+#include <asm/system_misc.h>
+
+struct syscon_reboot_context {
+ struct regmap *map;
+ u32 offset;
+ u32 mask;
+};
+
+static struct syscon_reboot_context *syscon_reboot_ctx;
+
+static void syscon_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+ struct syscon_reboot_context *ctx = syscon_reboot_ctx;
+ unsigned long timeout;
+
+ /* Issue the reboot */
+ if (ctx->map)
+ regmap_write(ctx->map, ctx->offset, ctx->mask);
+
+ timeout = jiffies + HZ;
+ while (time_before(jiffies, timeout))
+ cpu_relax();
+
+ pr_emerg("Unable to restart system\n");
+}
+
+static int syscon_reboot_probe(struct platform_device *pdev)
+{
+ struct syscon_reboot_context *ctx;
+ struct device *dev = &pdev->dev;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx) {
+ dev_err(&pdev->dev, "out of memory for context\n");
+ return -ENOMEM;
+ }
+
+ ctx->map = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
+ if (IS_ERR(ctx->map))
+ return PTR_ERR(ctx->map);
+
+ if (of_property_read_u32(pdev->dev.of_node, "offset", &ctx->offset))
+ return -EINVAL;
+
+ if (of_property_read_u32(pdev->dev.of_node, "mask", &ctx->mask))
+ return -EINVAL;
+
+ arm_pm_restart = syscon_restart;
+ syscon_reboot_ctx = ctx;
+
+ return 0;
+}
+
+static struct of_device_id syscon_reboot_of_match[] = {
+ { .compatible = "syscon-reboot" },
+ {}
+};
+
+static struct platform_driver syscon_reboot_driver = {
+ .probe = syscon_reboot_probe,
+ .driver = {
+ .name = "syscon-reboot",
+ .of_match_table = syscon_reboot_of_match,
+ },
+};
+module_platform_driver(syscon_reboot_driver);
--
1.9.1
next prev parent reply other threads:[~2014-07-09 2:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-09 2:15 [PATCH V8 0/6] Add X-Gene platform reboot mechanism Feng Kan
2014-07-09 2:15 ` Feng Kan [this message]
2014-07-09 3:54 ` [PATCH V8 1/6] power: reset: Add generic SYSCON register mapped reset Guenter Roeck
2014-07-09 21:15 ` Feng Kan
2014-07-09 21:27 ` Guenter Roeck
2014-07-09 2:15 ` [PATCH V8 2/6] Documentation: power: reset: Add documentation for generic SYSCON reboot driver Feng Kan
2014-07-09 2:15 ` [PATCH V8 3/6] Documentation: arm64: add SCU dts binding documentation to linux kernel Feng Kan
2014-07-09 2:15 ` [PATCH V8 4/6] arm64: dts: Add X-Gene reboot driver dts node Feng Kan
2014-07-09 2:15 ` [PATCH V8 5/6] arm64: Select reboot driver for X-Gene platform Feng Kan
2014-07-09 2:15 ` [PATCH V8 6/6] power: reset: Remove X-Gene reboot driver Feng Kan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404872153-3594-2-git-send-email-fkan@apm.com \
--to=fkan@apm.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@apm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome