[PATCH 3/6] clk: tegra: Update binding doc Tegra132

[Peter De Schrijver <pdeschrijver@nvidia.com>]

Tegra132 has almost the same clock structure than Tegra124. This patch
documents the missing clock IDs.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 .../bindings/clock/nvidia,tegra124-car.txt         |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
index ded5d62..28129a9 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
@@ -1,4 +1,4 @@
-NVIDIA Tegra124 Clock And Reset Controller
+NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
 
 This binding uses the common clock binding:
 Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
 for muxing and gating Tegra's clocks, and setting their rates.
 
 Required properties :
-- compatible : Should be "nvidia,tegra124-car"
+- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
 - reg : Should contain CAR registers location and length
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra124-car.h>.
+  <dt-bindings/clock/tegra124-car.h>. The following clocks do not exist
+  in the nvidia,tegra132-car binding: TEGRA124_CLK_CCLK_G,
+  TEGRA124_CLK_CCLK_LP, TEGRA124_CLK_PLL_X and TEGRA124_CLK_PLL_X_OUT0.
 - #reset-cells : Should be 1.
   In clock consumers, this cell represents the bit number in the CAR's
   array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-- 
1.7.7.rc0.72.g4b5ea.dirty