From: Sam Asadi <asadi.samuel@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
"Pali Rohár" <pali.rohar@gmail.com>,
"Sonal Santan" <sonal.santan@gmail.com>,
"Randy Dunlap" <rdunlap@infradead.org>,
"Linus Torvalds" <torvalds@linux-foundation.org>,
sam-the-6 <asadi.samuel@gmail.com>
Subject: [PATCH 81/94] Documenation/laptops: rename and update hpfall.c
Date: Tue, 15 Jul 2014 20:01:36 +0300 [thread overview]
Message-ID: <1405443709-15288-81-git-send-email-asadi.samuel@gmail.com> (raw)
In-Reply-To: <1405443709-15288-1-git-send-email-asadi.samuel@gmail.com>
From: Pali Rohár <pali.rohar@gmail.com>
Dell kernel driver dell-smo8800 provides same freefall interface as hp_accel so
program hpfall.c works also on Dell laptops. So rename it to freefall.c.
Dell driver does not provide hp::hddprotect led so make sure that freefall.c
works also if hp::hddprotect does not exist in sysfs.
Additionally write info to syslog.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: sam-the-6 <asadi.samuel@gmail.com>
---
Documentation/laptops/00-INDEX | 4 +-
Documentation/laptops/freefall.c | 177 ++++++++++++++++++++++++++++++++++++++
Documentation/laptops/hpfall.c | 146 -------------------------------
3 files changed, 179 insertions(+), 148 deletions(-)
create mode 100644 Documentation/laptops/freefall.c
delete mode 100644 Documentation/laptops/hpfall.c
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index d13b9a9..d399ae1 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -8,8 +8,8 @@ disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
-hpfall.c
- - (HP) laptop accelerometer program for disk protection.
+freefall.c
+ - (HP/DELL) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
diff --git a/Documentation/laptops/freefall.c b/Documentation/laptops/freefall.c
new file mode 100644
index 0000000..aab2ff0
--- /dev/null
+++ b/Documentation/laptops/freefall.c
@@ -0,0 +1,177 @@
+/* Disk protection for HP/DELL machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@ucw.cz>
+ * Copyright 2012 Sonal Santan
+ * Copyright 2014 Pali Rohár <pali.rohar@gmail.com>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+#include <sys/mman.h>
+#include <sched.h>
+#include <syslog.h>
+
+static int noled;
+static char unload_heads_path[64];
+static char device_path[32];
+static const char app_name[] = "FREE FALL";
+
+static int set_unload_heads_path(char *device)
+{
+ char devname[64];
+
+ if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
+ return -EINVAL;
+ strncpy(devname, device + 5, sizeof(devname) - 1);
+ strncpy(device_path, device, sizeof(device_path) - 1);
+
+ snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
+ "/sys/block/%s/device/unload_heads", devname);
+ return 0;
+}
+
+static int valid_disk(void)
+{
+ int fd = open(unload_heads_path, O_RDONLY);
+
+ if (fd < 0) {
+ perror(unload_heads_path);
+ return 0;
+ }
+
+ close(fd);
+ return 1;
+}
+
+static void write_int(char *path, int i)
+{
+ char buf[1024];
+ int fd = open(path, O_RDWR);
+
+ if (fd < 0) {
+ perror("open");
+ exit(1);
+ }
+
+ sprintf(buf, "%d", i);
+
+ if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+ perror("write");
+ exit(1);
+ }
+
+ close(fd);
+}
+
+static void set_led(int on)
+{
+ if (noled)
+ return;
+ write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+static void protect(int seconds)
+{
+ const char *str = (seconds == 0) ? "Unparked" : "Parked";
+
+ write_int(unload_heads_path, seconds*1000);
+ syslog(LOG_INFO, "%s %s disk head\n", str, device_path);
+}
+
+static int on_ac(void)
+{
+ /* /sys/class/power_supply/AC0/online */
+ return 1;
+}
+
+static int lid_open(void)
+{
+ /* /proc/acpi/button/lid/LID/state */
+ return 1;
+}
+
+static void ignore_me(int signum)
+{
+ protect(0);
+ set_led(0);
+}
+
+int main(int argc, char **argv)
+{
+ int fd, ret;
+ struct stat st;
+ struct sched_param param;
+
+ if (argc == 1)
+ ret = set_unload_heads_path("/dev/sda");
+ else if (argc == 2)
+ ret = set_unload_heads_path(argv[1]);
+ else
+ ret = -EINVAL;
+
+ if (ret || !valid_disk()) {
+ fprintf(stderr, "usage: %s <device> (default: /dev/sda)\n",
+ argv[0]);
+ exit(1);
+ }
+
+ fd = open("/dev/freefall", O_RDONLY);
+ if (fd < 0) {
+ perror("/dev/freefall");
+ return EXIT_FAILURE;
+ }
+
+ if (stat("/sys/class/leds/hp::hddprotect/brightness", &st))
+ noled = 1;
+
+ if (daemon(0, 0) != 0) {
+ perror("daemon");
+ return EXIT_FAILURE;
+ }
+
+ openlog(app_name, LOG_CONS | LOG_PID | LOG_NDELAY, LOG_LOCAL1);
+
+ param.sched_priority = sched_get_priority_max(SCHED_FIFO);
+ sched_setscheduler(0, SCHED_FIFO, ¶m);
+ mlockall(MCL_CURRENT|MCL_FUTURE);
+
+ signal(SIGALRM, ignore_me);
+
+ for (;;) {
+ unsigned char count;
+
+ ret = read(fd, &count, sizeof(count));
+ alarm(0);
+ if ((ret == -1) && (errno == EINTR)) {
+ /* Alarm expired, time to unpark the heads */
+ continue;
+ }
+
+ if (ret != sizeof(count)) {
+ perror("read");
+ break;
+ }
+
+ protect(21);
+ set_led(1);
+ if (1 || on_ac() || lid_open())
+ alarm(2);
+ else
+ alarm(20);
+ }
+
+ closelog();
+ close(fd);
+ return EXIT_SUCCESS;
+}
diff --git a/Documentation/laptops/hpfall.c b/Documentation/laptops/hpfall.c
deleted file mode 100644
index b85dbba..0000000
--- a/Documentation/laptops/hpfall.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* Disk protection for HP machines.
- *
- * Copyright 2008 Eric Piel
- * Copyright 2009 Pavel Machek <pavel@ucw.cz>
- *
- * GPLv2.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include <string.h>
-#include <stdint.h>
-#include <errno.h>
-#include <signal.h>
-#include <sys/mman.h>
-#include <sched.h>
-
-char unload_heads_path[64];
-
-int set_unload_heads_path(char *device)
-{
- char devname[64];
-
- if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
- return -EINVAL;
- strncpy(devname, device + 5, sizeof(devname));
-
- snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
- "/sys/block/%s/device/unload_heads", devname);
- return 0;
-}
-int valid_disk(void)
-{
- int fd = open(unload_heads_path, O_RDONLY);
- if (fd < 0) {
- perror(unload_heads_path);
- return 0;
- }
-
- close(fd);
- return 1;
-}
-
-void write_int(char *path, int i)
-{
- char buf[1024];
- int fd = open(path, O_RDWR);
- if (fd < 0) {
- perror("open");
- exit(1);
- }
- sprintf(buf, "%d", i);
- if (write(fd, buf, strlen(buf)) != strlen(buf)) {
- perror("write");
- exit(1);
- }
- close(fd);
-}
-
-void set_led(int on)
-{
- write_int("/sys/class/leds/hp::hddprotect/brightness", on);
-}
-
-void protect(int seconds)
-{
- write_int(unload_heads_path, seconds*1000);
-}
-
-int on_ac(void)
-{
-// /sys/class/power_supply/AC0/online
-}
-
-int lid_open(void)
-{
-// /proc/acpi/button/lid/LID/state
-}
-
-void ignore_me(void)
-{
- protect(0);
- set_led(0);
-}
-
-int main(int argc, char **argv)
-{
- int fd, ret;
- struct sched_param param;
-
- if (argc == 1)
- ret = set_unload_heads_path("/dev/sda");
- else if (argc == 2)
- ret = set_unload_heads_path(argv[1]);
- else
- ret = -EINVAL;
-
- if (ret || !valid_disk()) {
- fprintf(stderr, "usage: %s <device> (default: /dev/sda)\n",
- argv[0]);
- exit(1);
- }
-
- fd = open("/dev/freefall", O_RDONLY);
- if (fd < 0) {
- perror("/dev/freefall");
- return EXIT_FAILURE;
- }
-
- daemon(0, 0);
- param.sched_priority = sched_get_priority_max(SCHED_FIFO);
- sched_setscheduler(0, SCHED_FIFO, ¶m);
- mlockall(MCL_CURRENT|MCL_FUTURE);
-
- signal(SIGALRM, ignore_me);
-
- for (;;) {
- unsigned char count;
-
- ret = read(fd, &count, sizeof(count));
- alarm(0);
- if ((ret == -1) && (errno == EINTR)) {
- /* Alarm expired, time to unpark the heads */
- continue;
- }
-
- if (ret != sizeof(count)) {
- perror("read");
- break;
- }
-
- protect(21);
- set_led(1);
- if (1 || on_ac() || lid_open())
- alarm(2);
- else
- alarm(20);
- }
-
- close(fd);
- return EXIT_SUCCESS;
-}
--
1.7.10.4
next prev parent reply other threads:[~2014-07-15 17:08 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-15 17:00 [PATCH 01/94] ARM: shmobile: Add DT and defconfigs to MAINTAINERS Sam Asadi
2014-07-15 17:00 ` [PATCH 02/94] clk: ti: apll: not allocating enough data Sam Asadi
2014-07-15 17:00 ` [PATCH 03/94] clk: ti: dra7: return error code in failure case Sam Asadi
2014-07-15 17:00 ` [PATCH 04/94] clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabled Sam Asadi
2014-07-15 17:00 ` [PATCH 05/94] clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock Sam Asadi
2014-07-15 17:00 ` [PATCH 06/94] clk: samsung: fix several typos to fix boot on s3c2410 Sam Asadi
2014-07-15 17:00 ` [PATCH 07/94] clk: samsung: add more aliases for s3c24xx Sam Asadi
2014-07-15 17:00 ` [PATCH 08/94] clk: samsung: exynos4: Remove SRC_MASK_ISP gates Sam Asadi
2014-07-15 17:00 ` [PATCH 09/94] clk: s3c64xx: Hookup SPI clocks correctly Sam Asadi
2014-07-15 17:00 ` [PATCH 10/94] clk/exynos5250: fix bit number for tv sysmmu clock Sam Asadi
2014-07-15 17:00 ` [PATCH 11/94] clk: exynos5420: Remove aclk66_peric from the clock tree description Sam Asadi
2014-07-15 17:00 ` [PATCH 12/94] dma: cppi41: handle 0-length packets Sam Asadi
2014-07-15 17:00 ` [PATCH 13/94] Update imx-sdma cyclic handling to report residue Sam Asadi
2014-07-15 17:00 ` [PATCH 14/94] clk: s2mps11: Fix double free corruption during driver unbind Sam Asadi
2014-07-15 17:00 ` [PATCH 15/94] clk: sunxi: fix devm_ioremap_resource error detection code Sam Asadi
2014-07-15 17:00 ` [PATCH 16/94] ARM: kprobes: Prevent known test failures stopping other tests running Sam Asadi
2014-07-15 17:00 ` [PATCH 17/94] ARM: kprobes: Disallow instructions with PC and register specified shift Sam Asadi
2014-07-15 17:00 ` [PATCH 18/94] ARM: kprobes: Fix test code compilation errors for ARMv4 targets Sam Asadi
2014-07-15 17:00 ` [PATCH 19/94] clk: qcom: HDMI source sel is 3 not 2 Sam Asadi
2014-07-15 17:00 ` [PATCH 20/94] ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Sam Asadi
2014-07-15 17:00 ` [PATCH 21/94] ARM: EXYNOS: Fix the check for non-smp configuration Sam Asadi
2014-07-15 17:00 ` [PATCH 22/94] ARM: dts: fix pwm-cells in pwm node for exynos4 Sam Asadi
2014-07-15 17:00 ` [PATCH 23/94] clocksource: exynos_mct: Fix ftrace Sam Asadi
2014-07-15 17:00 ` [PATCH 24/94] clocksource: exynos_mct: Register the timer for stable udelay Sam Asadi
2014-07-15 17:00 ` [PATCH 25/94] iio: hid-sensor-press: Fix return values Sam Asadi
2014-07-15 17:00 ` [PATCH 26/94] iio: hid-sensor-accel-3d: " Sam Asadi
2014-07-15 17:00 ` [PATCH 27/94] iio: hid-sensor-magn-3d: " Sam Asadi
2014-07-15 17:00 ` [PATCH 28/94] iio: hid-sensor-als: " Sam Asadi
2014-07-15 17:00 ` [PATCH 29/94] iio: hid-sensor-gyro-3d: " Sam Asadi
2014-07-15 17:00 ` [PATCH 30/94] iio: hid-sensor-prox: " Sam Asadi
2014-07-15 17:00 ` [PATCH 31/94] ext4: fix unjournalled bg descriptor while initializing inode bitmap Sam Asadi
2014-07-15 17:00 ` [PATCH 32/94] ext4: clarify error count warning messages Sam Asadi
2014-07-15 17:00 ` [PATCH 33/94] ext4: clarify ext4_error message in ext4_mb_generate_buddy_error() Sam Asadi
2014-07-15 17:00 ` [PATCH 34/94] ext4: disable synchronous transaction batching if max_batch_time==0 Sam Asadi
2014-07-15 17:00 ` [PATCH 35/94] ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver Sam Asadi
2014-07-15 17:00 ` [PATCH 36/94] ARM: DRA7: hwmod: Fixup SATA hwmod Sam Asadi
2014-07-15 17:00 ` [PATCH 37/94] ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ss Sam Asadi
2014-07-15 17:00 ` [PATCH 38/94] ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflow Sam Asadi
2014-07-15 17:00 ` [PATCH 39/94] iio:tcs3472: Check for buffer enabled and locking Sam Asadi
2014-07-15 17:00 ` [PATCH 40/94] USB: cp210x: add support for Corsair usb dongle Sam Asadi
2014-07-15 17:00 ` [PATCH 41/94] usb: option: Add ID for Telewell TW-LTE 4G v2 Sam Asadi
2014-07-15 17:00 ` [PATCH 42/94] ARM: DRA7/AM43XX: fix header definition for omap44xx_restart Sam Asadi
2014-07-15 17:00 ` [PATCH 43/94] ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on Sam Asadi
2014-07-15 17:00 ` [PATCH 44/94] ARM: OMAP2+: create dsp device only on OMAP3 SoCs Sam Asadi
2014-07-15 17:01 ` [PATCH 45/94] ARM: OMAP2+: Make GPMC skip disabled devices Sam Asadi
2014-07-15 17:01 ` [PATCH 46/94] ARM: dts: am335x-evm: Enable the McASP FIFO for audio Sam Asadi
2014-07-16 5:40 ` Peter Ujfalusi
2014-07-15 17:01 ` [PATCH 47/94] ARM: dts: am335x-evmsk: " Sam Asadi
2014-07-15 17:01 ` [PATCH 48/94] ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA Sam Asadi
2014-07-15 17:01 ` [PATCH 49/94] ARM: l2c: fix revision checking Sam Asadi
2014-07-15 17:01 ` [PATCH 50/94] ARM: EXYNOS: Update secondary boot addr for secure mode Sam Asadi
2014-07-15 17:01 ` [PATCH 51/94] ARM: dts: Update the parent for Audss clocks in Exynos5420 Sam Asadi
2014-07-15 17:01 ` [PATCH 52/94] ARM: imx: fix shared gate clock Sam Asadi
2014-07-15 17:01 ` [PATCH 53/94] ARM: OMAP2+: Remove non working OMAP HDMI audio initialization Sam Asadi
2014-07-15 17:01 ` [PATCH 54/94] iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends Sam Asadi
2014-07-15 17:01 ` [PATCH 55/94] Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code Sam Asadi
2014-07-15 17:01 ` [PATCH 56/94] Drivers: hv: util: Fix a bug in the KVP code Sam Asadi
2014-07-15 17:01 ` [PATCH 57/94] USB: ftdi_sio: Add extra PID Sam Asadi
2014-07-15 17:01 ` [PATCH 58/94] i8k: Fix non-SMP operation Sam Asadi
2014-08-18 23:19 ` i8k: Don't revert affinity in i8k_smm Con Kolivas
2014-08-19 2:32 ` Guenter Roeck
2014-08-19 12:34 ` Con Kolivas
2014-07-15 17:01 ` [PATCH 59/94] m68k: Fix boot regression on machines with RAM at non-zero Sam Asadi
2014-07-15 17:01 ` [PATCH 60/94] ARM: EXYNOS: Add support for clock handling in power domain Sam Asadi
2014-07-15 17:01 ` [PATCH 61/94] clk: exynos5420: Add IDs for clocks used in PD mfc Sam Asadi
2014-07-15 17:01 ` [PATCH 62/94] ARM: dts: Add clock property for mfc_pd in exynos5420 Sam Asadi
2014-07-15 17:01 ` [PATCH 63/94] ARM: EXYNOS: Register cpuidle device only on exynos4210 and 5250 Sam Asadi
2014-07-15 17:01 ` [PATCH 64/94] serial: Test for no tx data on tx restart Sam Asadi
2014-07-15 17:01 ` [PATCH 65/94] serial: arc_uart: Use uart_circ_empty() for open-coded comparison Sam Asadi
2014-07-15 17:01 ` [PATCH 66/94] m68k: Export mach_random_get_entropy to modules Sam Asadi
2014-07-15 17:01 ` [PATCH 67/94] ext4: revert commit which was causing fs corruption after journal replays Sam Asadi
2014-07-15 17:01 ` [PATCH 68/94] serial: imx: Fix build breakage Sam Asadi
2014-07-15 17:01 ` [PATCH 69/94] serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0 Sam Asadi
2014-07-15 17:01 ` [PATCH 70/94] USB: serial: ftdi_sio: Add Infineon Triboard Sam Asadi
2014-07-15 17:01 ` [PATCH 71/94] phy: sun4i: depend on RESET_CONTROLLER Sam Asadi
2014-07-15 17:01 ` [PATCH 72/94] phy: omap-usb2: fix devm_ioremap_resource error detection code Sam Asadi
2014-07-15 17:01 ` [PATCH 73/94] drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE Sam Asadi
2014-07-15 17:01 ` [PATCH 74/94] phy: core: Fix error path in phy_create() Sam Asadi
2014-07-15 17:01 ` [PATCH 75/94] phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove Sam Asadi
2014-07-15 17:01 ` [PATCH 76/94] ARM: at91: at91sam9x5: add clocks for usb device Sam Asadi
2014-07-15 17:01 ` [PATCH 77/94] Documentation/Changes: clean up mcelog paragraph Sam Asadi
2014-07-15 17:01 ` [PATCH 78/94] scripts/kernel-doc: handle object-like macros Sam Asadi
2014-07-15 17:01 ` [PATCH 79/94] DocBook: fix mtdnand typos Sam Asadi
2014-07-15 17:01 ` [PATCH 80/94] DocBook: fix various typos Sam Asadi
2014-07-15 17:01 ` Sam Asadi [this message]
2014-07-15 17:01 ` [PATCH 82/94] ext4: fix a potential deadlock in __ext4_es_shrink() Sam Asadi
2014-07-15 17:01 ` [PATCH 83/94] ext4: fix potential null pointer dereference in ext4_free_inode Sam Asadi
2014-07-15 17:01 ` [PATCH 84/94] parisc: add serial ports of C8000/1GHz machine to hardware database Sam Asadi
2014-07-15 17:01 ` [PATCH 85/94] parisc: fix fanotify_mark() syscall on 32bit compat kernel Sam Asadi
2014-07-15 17:01 ` [PATCH 86/94] parisc: drop unused defines and header includes Sam Asadi
2014-07-15 17:01 ` [PATCH 87/94] clk: spear3xx: Use proper control register offset Sam Asadi
2014-07-15 17:01 ` [PATCH 88/94] clk: spear3xx: Set proper clock parent of uart1/2 Sam Asadi
2014-07-15 17:01 ` [PATCH 89/94] Linux 3.16-rc5 Sam Asadi
2014-07-15 17:37 ` Valdis.Kletnieks
2014-07-15 17:01 ` [PATCH 90/94] Staging: comedi: 8253.h fixed by removing 'return' from generic func Sam Asadi
2014-07-15 17:01 ` [PATCH 91/94] Staging: comedi: 8255: fixed by adding an empthy line Sam Asadi
2014-07-15 17:01 ` [PATCH 92/94] Staging: comedi: adl_pci9118: fixed style issues Sam Asadi
2014-07-15 17:01 ` [PATCH 93/94] Staging: comedi: 3 files revised " Sam Asadi
2014-07-15 17:01 ` [PATCH 94/94] Staging: commedi: 8253.h: style issue fixed Sam Asadi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405443709-15288-81-git-send-email-asadi.samuel@gmail.com \
--to=asadi.samuel@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=rdunlap@infradead.org \
--cc=sonal.santan@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®