From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 14/28] phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs
Date: Tue, 22 Jul 2014 16:26:37 +0530 [thread overview]
Message-ID: <1406026611-30493-15-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1406026611-30493-1-git-send-email-kishon@ti.com>
From: Sachin Kamat <sachin.kamat@samsung.com>
Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and
USB gadget controller supported by the DWC2 gadget driver, make it
depend on them and default to ARCH_EXYNOS as they are meant for
Exynos platforms. Also, make the sub-drivers silent options enabling
them based on the SoC platforms that they are meant to work with. This
will make life easier for end users who do not have any way knowing the
dependencies.
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/Kconfig | 35 +++++++++++------------------------
1 file changed, 11 insertions(+), 24 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 7c49c4c..f28b87f 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -132,43 +132,30 @@ config PHY_SUN4I_USB
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
select GENERIC_PHY
select MFD_SYSCON
+ default ARCH_EXYNOS
help
Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support for
- particular SoCs has to be enabled in addition to this driver. Number
- and type of supported phys depends on the SoC.
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
config PHY_EXYNOS4210_USB2
- bool "Support for Exynos 4210"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on CPU_EXYNOS4210
- help
- Enable USB PHY support for Exynos 4210. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 4210 four
- phys are available - device, host, HSIC0 and HSIC1.
+ default CPU_EXYNOS4210
config PHY_EXYNOS4X12_USB2
- bool "Support for Exynos 3250/4x12"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on (SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412)
- help
- Enable USB PHY support for Exynos 3250/4x12. This option requires
- that Samsung USB 2.0 PHY driver is enabled and means that support for
- this particular SoC is compiled in the driver. In case of Exynos 4x12
- four phys are available - device, host, HSIC0 and HSIC1.
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
config PHY_EXYNOS5250_USB2
- bool "Support for Exynos 5250"
+ bool
depends on PHY_SAMSUNG_USB2
- depends on SOC_EXYNOS5250
- help
- Enable USB PHY support for Exynos 5250. This option requires that
- Samsung USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of Exynos 5250 four
- phys are available - device, host, HSIC0 and HSIC.
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
--
1.7.9.5
next prev parent reply other threads:[~2014-07-22 10:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-22 10:56 [GIT PULL 00/28] PHY: for 3.17 Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 01/28] phy: miphy365x: Add MiPHY365x header file for DT x Driver defines Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 02/28] phy: exynos-dp-video: Use PTR_ERR_OR_ZERO Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 03/28] phy: exynos-mipi-video: " Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 04/28] phy: sun4i-usb: " Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 05/28] phy: exynos5-usbdrd: Make local functions static Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 06/28] phy: phy-samsung-usb2: Change phy power on/power off sequence Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 07/28] phy: phy-omap-pipe3: Add support for PCIe PHY Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 08/28] phy: pipe3: insert delay to enumerate in GEN2 mode Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 09/28] Documentation: Document Hisilicon hix5hd2 sata PHY Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 10/28] phy: add hix5hd2-sata-phy driver Kishon Vijay Abraham I
2014-07-24 11:27 ` Paul Bolle
2014-07-22 10:56 ` [PATCH 11/28] drivers: phy: exynos-usb2: add support for Exynos 3250 Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 12/28] phy: core: Support regulator supply for PHY power Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 13/28] phy: core: Add phy-supply to DT binding documentation Kishon Vijay Abraham I
2014-07-22 10:56 ` Kishon Vijay Abraham I [this message]
2014-07-22 10:56 ` [PATCH 15/28] phy: Kconfig: Update config for Exynos USB DRD Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 16/28] phy: qcom: Add driver for QCOM APQ8064 SATA PHY Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 17/28] phy: qcom: Add APQ8064 SATA PHY device tree bindings Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 18/28] phy: Remove ARCH_KIRKWOOD dependency Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 19/28] phy: add a driver for the Berlin SATA PHY Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 20/28] Documentation: bindings: add " Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 21/28] phy: core: Fix of_phy_provider_lookup to return PHY provider for sub node Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 22/28] phy: core: Let node ptr of PHY point to PHY and not of PHY provider Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 23/28] phy: qcom-apq8064: fix possible timeout without check Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 24/28] phy: qcom: Add driver for QCOM IPQ806x SATA PHY Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 25/28] phy: qcom: Add device tree bindings for " Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 26/28] phy: miphy365x: Add Device Tree bindings for the MiPHY365x Kishon Vijay Abraham I
2014-07-22 10:56 ` [PATCH 27/28] phy: miphy365x: Provide support for the MiPHY356x Generic PHY Kishon Vijay Abraham I
2014-07-24 10:36 ` Paul Bolle
2014-07-22 10:56 ` [PATCH 28/28] phy: miphy365x: Represent each PHY channel as a DT subnode Kishon Vijay Abraham I
2014-07-22 23:33 ` [GIT PULL 00/28] PHY: for 3.17 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406026611-30493-15-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®