From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755229AbaGVK7I (ORCPT ); Tue, 22 Jul 2014 06:59:08 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:56794 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754916AbaGVK5t (ORCPT ); Tue, 22 Jul 2014 06:57:49 -0400 From: Kishon Vijay Abraham I To: CC: , Subject: [PATCH 25/28] phy: qcom: Add device tree bindings for IPQ806x SATA PHY Date: Tue, 22 Jul 2014 16:26:48 +0530 Message-ID: <1406026611-30493-26-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1406026611-30493-1-git-send-email-kishon@ti.com> References: <1406026611-30493-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Kumar Gala Add binding spec for Qualcomm SoC PHYs, starting with the SATA PHY on the IPQ806x family of SoCs. Signed-off-by: Kumar Gala Signed-off-by: Kishon Vijay Abraham I --- .../bindings/phy/qcom-ipq806x-sata-phy.txt | 23 ++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt diff --git a/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt new file mode 100644 index 0000000..76bfbd0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt @@ -0,0 +1,23 @@ +Qualcomm IPQ806x SATA PHY Controller +------------------------------------ + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible: compatible list, contains "qcom,ipq806x-sata-phy" +- reg: offset and length of the SATA PHY register set; +- #phy-cells: must be zero +- clocks: must be exactly one entry +- clock-names: must be "cfg" + +Example: + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + }; -- 1.7.9.5