mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ian Abbott <abbotti@mev.co.uk>
To: driverdev-devel@linuxdriverproject.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Ian Abbott <abbotti@mev.co.uk>,
	H Hartley Sweeten <hartleys@visionengravers.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 08/18] staging: comedi: amplc_pci224: omit '!= 0' from logical expressions
Date: Thu, 31 Jul 2014 14:47:45 +0100	[thread overview]
Message-ID: <1406814475-5923-9-git-send-email-abbotti@mev.co.uk> (raw)
In-Reply-To: <1406814475-5923-1-git-send-email-abbotti@mev.co.uk>

Since anything non-zero is logically "true", don't bother doing
"not-equal" comparisons with zero, except when testing for an explicit
number 0 (not as a result of bit tests for example).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
---
 drivers/staging/comedi/drivers/amplc_pci224.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index f786237..0ac05fb 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -759,13 +759,13 @@ pci224_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 		break;
 	case TRIG_EXT:
 		/* Force to external trigger 0. */
-		if ((cmd->start_arg & ~CR_FLAGS_MASK) != 0) {
+		if (cmd->start_arg & ~CR_FLAGS_MASK) {
 			cmd->start_arg = COMBINE(cmd->start_arg, 0,
 						 ~CR_FLAGS_MASK);
 			err |= -EINVAL;
 		}
 		/* The only flag allowed is CR_EDGE, which is ignored. */
-		if ((cmd->start_arg & CR_FLAGS_MASK & ~CR_EDGE) != 0) {
+		if (cmd->start_arg & CR_FLAGS_MASK & ~CR_EDGE) {
 			cmd->start_arg = COMBINE(cmd->start_arg, 0,
 						 CR_FLAGS_MASK & ~CR_EDGE);
 			err |= -EINVAL;
@@ -785,14 +785,14 @@ pci224_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 		break;
 	case TRIG_EXT:
 		/* Force to external trigger 0. */
-		if ((cmd->scan_begin_arg & ~CR_FLAGS_MASK) != 0) {
+		if (cmd->scan_begin_arg & ~CR_FLAGS_MASK) {
 			cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
 						      ~CR_FLAGS_MASK);
 			err |= -EINVAL;
 		}
 		/* Only allow flags CR_EDGE and CR_INVERT.  Ignore CR_EDGE. */
-		if ((cmd->scan_begin_arg & CR_FLAGS_MASK &
-		     ~(CR_EDGE | CR_INVERT)) != 0) {
+		if (cmd->scan_begin_arg & CR_FLAGS_MASK &
+		    ~(CR_EDGE | CR_INVERT)) {
 			cmd->scan_begin_arg = COMBINE(cmd->scan_begin_arg, 0,
 						      CR_FLAGS_MASK &
 						      ~(CR_EDGE | CR_INVERT));
@@ -810,13 +810,13 @@ pci224_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 		break;
 	case TRIG_EXT:
 		/* Force to external trigger 0. */
-		if ((cmd->stop_arg & ~CR_FLAGS_MASK) != 0) {
+		if (cmd->stop_arg & ~CR_FLAGS_MASK) {
 			cmd->stop_arg = COMBINE(cmd->stop_arg, 0,
 						~CR_FLAGS_MASK);
 			err |= -EINVAL;
 		}
 		/* The only flag allowed is CR_EDGE, which is ignored. */
-		if ((cmd->stop_arg & CR_FLAGS_MASK & ~CR_EDGE) != 0) {
+		if (cmd->stop_arg & CR_FLAGS_MASK & ~CR_EDGE) {
 			cmd->stop_arg = COMBINE(cmd->stop_arg, 0,
 						CR_FLAGS_MASK & ~CR_EDGE);
 		}
@@ -1026,7 +1026,7 @@ static irqreturn_t pci224_interrupt(int irq, void *d)
 		devpriv->intr_running = 1;
 		devpriv->intr_cpuid = THISCPU;
 		spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
-		if (valid_intstat != 0) {
+		if (valid_intstat) {
 			cmd = &s->async->cmd;
 			if (valid_intstat & PCI224_INTR_EXT) {
 				devpriv->intsce &= ~PCI224_INTR_EXT;
-- 
2.0.0


  parent reply	other threads:[~2014-07-31 13:52 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-31 13:47 [PATCH 00/18] staging: comedi: amplc_pci224: remove legacy stuff Ian Abbott
2014-07-31 13:47 ` [PATCH 01/18] staging: comedi: amplc_pci224: reformat some comments Ian Abbott
2014-07-31 13:47 ` [PATCH 02/18] staging: comedi: amplc_pci224: fix checkpatch line over 80 characters Ian Abbott
2014-07-31 13:47 ` [PATCH 03/18] staging: comedi: amplc_pci224: blank lines aren't necessary before a close brace '}' Ian Abbott
2014-07-31 13:47 ` [PATCH 04/18] staging: comedi: amplc_pci224: multiple assignments should be avoided Ian Abbott
2014-07-31 13:47 ` [PATCH 05/18] staging: comedi: amplc_pci224: fix spinlock_t definition without comment Ian Abbott
2014-07-31 13:47 ` [PATCH 06/18] staging: comedi: amplc_pci224: add whitespace to pci224_boards[] Ian Abbott
2014-07-31 13:47 ` [PATCH 07/18] staging: comedi: amplc_pci224: set a more descriptive MODULE_DESCRIPTION() Ian Abbott
2014-07-31 13:47 ` Ian Abbott [this message]
2014-07-31 13:47 ` [PATCH 09/18] staging: comedi: amplc_pci224: remove some unnecessary parentheses Ian Abbott
2014-07-31 13:47 ` [PATCH 10/18] staging: comedi: amplc_pci224: reduce leading whitespace in a few places Ian Abbott
2014-07-31 13:47 ` [PATCH 11/18] staging: comedi: amplc_pci224: no need for '&function' Ian Abbott
2014-07-31 13:47 ` [PATCH 12/18] staging: comedi: amplc_pci224: remove options to select output ranges Ian Abbott
2014-07-31 13:47 ` [PATCH 13/18] staging: comedi: amplc_pci224: remove "legacy" attach mechanism Ian Abbott
2014-07-31 13:47 ` [PATCH 14/18] staging: comedi: amplc_pci224: no need to manipulate PCI ref count Ian Abbott
2014-07-31 13:47 ` [PATCH 15/18] staging: comedi: amplc_pci224: put board indices in PCI driver_data Ian Abbott
2014-07-31 13:47 ` [PATCH 16/18] staging: comedi: amplc_pci224: remove PCI_DEVICE_ID_... macros Ian Abbott
2014-07-31 13:47 ` [PATCH 17/18] staging: comedi: amplc_pci224: absorb pci224_attach_common() Ian Abbott
2014-07-31 13:47 ` [PATCH 18/18] staging: comedi: amplc_pci224: no need to comedi_set_hw_dev() here Ian Abbott
2014-07-31 20:28 ` [PATCH 00/18] staging: comedi: amplc_pci224: remove legacy stuff Hartley Sweeten
2014-07-31 20:44   ` Hartley Sweeten
2014-08-04 10:57   ` Ian Abbott
2014-08-04 11:14 ` [PATCH 15/18 v2] staging: comedi: amplc_pci224: put board indices in PCI driver_data Ian Abbott
2014-08-04 16:38   ` Hartley Sweeten

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406814475-5923-9-git-send-email-abbotti@mev.co.uk \
    --to=abbotti@mev.co.uk \
    --cc=driverdev-devel@linuxdriverproject.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hartleys@visionengravers.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®