mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>,
	Linus Walleij <linus.walleij@linaro.org>,
	Grant Likely <grant.likely@linaro.org>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>,
	Bjorn Andersson <bjorn.andersson@sonymobile.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/6] Qualcomm PMIC pin controller drivers
Date: Mon, 11 Aug 2014 18:40:28 +0300	[thread overview]
Message-ID: <1407771634-14946-1-git-send-email-iivanov@mm-sol.com> (raw)

From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

Hi, 

This is third version of the patches posted earlier here[1].

Changes:
- pm8xxx-gpio driver renamed to ssbi-pmic-gpio and qpnp-pinctrl
  to spmi-pmic-pinctrl
- Functions are described with strings. Available functions for
  each PMIC GPIO are described in DT include file.
- Available 'power-sources' are described per PMIC in DT include files
  and per chip definitions from pm8xxx-gpio driver are removed.
- Property 'qcom,pull-up' renamed 'qcom,pull-up-strength' possible
  are listed in DT include file.
- Property 'qcom,strength' renamed to 'qcom,drive-strength'
- Added parsing code for above 2 properties to ssbi-pmic-gpio driver
- Added AP8074 Dragonboard PMIC GPIO DT files.
- Added qcom,mode property for Multi-Purpose Pins
- Fixed review comments and driver issues.

Short description:

Patches adds pin control drivers for Multi-purpose pin (MPP) and
General-purpose pin (GPIO) controllers found in Qualcomm SSBI and 
SPMI based PMIC chips.

MPP's are enhanced GPIO's with analog circuits, which support 
following functions in addition to digital input/output: analog
input/output and current sinks. 

[1] http://thread.gmane.org/gmane.linux.kernel/1749903

Bjorn Andersson (2):
  pinctrl: Device tree bindings for Qualcomm pm8xxx gpio block
  pinctrl: Introduce pinctrl driver for Qualcomm SSBI PMIC's

Ivan T. Ivanov (4):
  pinctrl: Add documentation for SPMI PMIC pinctrl driver bindings
  pinctrl: Qualcomm SPMI PMIC pin controller driver
  ARM: dts: qcom: Add PM8941 and PM8841 pinctrl nodes
  ARM: dts: qcom: Add APQ8074 Dragonboard PMIC GPIO bindings

 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt |  212 +++
 .../devicetree/bindings/pinctrl/qcom,pmic-mpp.txt  |  179 +++
 .../dts/qcom-apq8074-dragonboard-pmics-pins.dtsi   |  103 ++
 arch/arm/boot/dts/qcom-apq8074-dragonboard.dts     |    1 +
 arch/arm/boot/dts/qcom-msm8974.dtsi                |   33 +
 drivers/pinctrl/qcom/Kconfig                       |   23 +
 drivers/pinctrl/qcom/Makefile                      |    2 +
 drivers/pinctrl/qcom/pinctrl-spmi-pmic.c           | 1532 ++++++++++++++++++++
 drivers/pinctrl/qcom/pinctrl-ssbi-pmic.c           |  870 +++++++++++
 include/dt-bindings/pinctrl/qcom,pmic-gpio.h       |  142 ++
 include/dt-bindings/pinctrl/qcom,pmic-mpp.h        |   70 +
 11 files changed, 3167 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
 create mode 100644 arch/arm/boot/dts/qcom-apq8074-dragonboard-pmics-pins.dtsi
 create mode 100644 drivers/pinctrl/qcom/pinctrl-spmi-pmic.c
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ssbi-pmic.c
 create mode 100644 include/dt-bindings/pinctrl/qcom,pmic-gpio.h
 create mode 100644 include/dt-bindings/pinctrl/qcom,pmic-mpp.h

-- 
1.8.3.2


             reply	other threads:[~2014-08-11 15:40 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-11 15:40 Ivan T. Ivanov [this message]
2014-08-11 15:40 ` [PATCH v3 1/6] pinctrl: Device tree bindings for Qualcomm pm8xxx gpio block Ivan T. Ivanov
2014-08-16 15:24   ` Daniel
2014-08-18  7:16     ` Ivan T. Ivanov
2014-08-20 22:10       ` Bjorn Andersson
2014-08-20 22:27   ` Bjorn Andersson
2014-08-25 13:14     ` Ivan T. Ivanov
2014-08-11 15:40 ` [PATCH v3 2/6] pinctrl: Introduce pinctrl driver for Qualcomm SSBI PMIC's Ivan T. Ivanov
2014-08-20  8:06   ` Srinivas Kandagatla
2014-08-20 21:28     ` Bjorn Andersson
2014-08-20 22:13       ` Bjorn Andersson
2014-11-03  8:48         ` Srinivas Kandagatla
2014-11-04  2:25           ` Bjorn Andersson
2014-08-11 15:40 ` [PATCH v3 3/6] pinctrl: Add documentation for SPMI PMIC pinctrl driver bindings Ivan T. Ivanov
2014-08-13 14:32   ` Stephen Boyd
2014-08-25 14:07     ` Ivan T. Ivanov
2014-08-11 15:40 ` [PATCH v3 4/6] pinctrl: Qualcomm SPMI PMIC pin controller driver Ivan T. Ivanov
2014-08-21  6:16   ` Bjorn Andersson
2014-08-25 14:00     ` Ivan T. Ivanov
2014-08-11 15:40 ` [PATCH v3 5/6] ARM: dts: qcom: Add PM8941 and PM8841 pinctrl nodes Ivan T. Ivanov
2014-08-14  7:33   ` Pramod Gurav
2014-08-25 14:06     ` Ivan T. Ivanov
2014-08-11 15:40 ` [PATCH v3 6/6] ARM: dts: qcom: Add APQ8074 Dragonboard PMIC GPIO bindings Ivan T. Ivanov
2014-08-20 23:06   ` Bjorn Andersson
2014-08-25 14:04     ` Ivan T. Ivanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407771634-14946-1-git-send-email-iivanov@mm-sol.com \
    --to=iivanov@mm-sol.com \
    --cc=bjorn.andersson@sonymobile.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®