mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: <suravee.suthikulpanit@amd.com>
To: <marc.zyngier@arm.com>, <mark.rutland@arm.com>, <jason@lakedaemon.net>
Cc: <pawel.moll@arm.com>, <Catalin.Marinas@arm.com>,
	<Will.Deacon@arm.com>, <tglx@linutronix.de>,
	<Harish.Kasiviswanathan@amd.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-doc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>,
	Mark Rutland <Mark.Rutland@arm.com>,
	"Marc Zyngier" <Marc.Zyngier@arm.com>
Subject: [PATCH 2/2 V4] irqchip: gicv2m: Add support for multiple MSI for ARM64 GICv2m
Date: Wed, 13 Aug 2014 10:00:41 -0500	[thread overview]
Message-ID: <1407942041-3291-3-git-send-email-suravee.suthikulpanit@amd.com> (raw)
In-Reply-To: <1407942041-3291-1-git-send-email-suravee.suthikulpanit@amd.com>

From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

This patch extend GICv2m MSI to support multiple MSI in ARM64.

This requires the common arch_setup_msi_irqs() to be overwriten
with ARM64 version which does not return 1 for PCI_CAP_ID_MSI and
nvec > 1.

Cc: Mark Rutland <Mark.Rutland@arm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Will Deacon <Will.Deacon@arm.com>
Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
---
 arch/arm64/include/asm/msi.h  | 15 ++++++++
 arch/arm64/kernel/Makefile    |  1 +
 arch/arm64/kernel/msi.c       | 57 +++++++++++++++++++++++++++++++
 drivers/irqchip/irq-gic-v2m.c | 79 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 152 insertions(+)
 create mode 100644 arch/arm64/include/asm/msi.h
 create mode 100644 arch/arm64/kernel/msi.c

diff --git a/arch/arm64/include/asm/msi.h b/arch/arm64/include/asm/msi.h
new file mode 100644
index 0000000..2a0944a
--- /dev/null
+++ b/arch/arm64/include/asm/msi.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_ARM64_MSI_H_
+#define _ASM_ARM64_MSI_H_
+
+struct pci_dev;
+struct msi_desc;
+
+struct arm64_msi_ops {
+	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
+	void (*teardown_msi_irqs)(struct pci_dev *dev);
+};
+
+extern struct arm64_msi_ops arm64_msi;
+extern int arm64_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
+
+#endif /* _ASM_ARM64_MSI_H_ */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index cdaedad..0636e27 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -29,6 +29,7 @@ arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND)	+= sleep.o suspend.o
 arm64-obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 arm64-obj-$(CONFIG_KGDB)		+= kgdb.o
 arm64-obj-$(CONFIG_EFI)			+= efi.o efi-stub.o efi-entry.o
+arm64-obj-$(CONFIG_PCI_MSI)		+= msi.o
 
 obj-y					+= $(arm64-obj-y) vdso/
 obj-m					+= $(arm64-obj-m)
diff --git a/arch/arm64/kernel/msi.c b/arch/arm64/kernel/msi.c
new file mode 100644
index 0000000..ed62397
--- /dev/null
+++ b/arch/arm64/kernel/msi.c
@@ -0,0 +1,57 @@
+/*
+ * ARM64 architectural MSI implemention
+ *
+ * Support for Message Signalelled Interrupts for systems that
+ * implement ARM Generic Interrupt Controller: GICv2m.
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ * Authors: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+
+#include <asm/msi.h>
+
+/*
+ * ARM64 function for seting up MSI irqs.
+ * Copied from driver/pci/msi.c: arch_setup_msi_irqs().
+ */
+int arm64_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	struct msi_desc *entry;
+	int ret;
+
+	if (type == PCI_CAP_ID_MSI && nvec > 1)
+		return 1;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		ret = arch_setup_msi_irq(dev, entry);
+		if (ret < 0)
+			return ret;
+		if (ret > 0)
+			return -ENOSPC;
+	}
+
+	return 0;
+}
+
+struct arm64_msi_ops arm64_msi = {
+	.setup_msi_irqs         = arm64_setup_msi_irqs,
+	.teardown_msi_irqs      = default_teardown_msi_irqs,
+};
+
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	return arm64_msi.setup_msi_irqs(dev, nvec, type);
+}
+
+void arch_teardown_msi_irqs(struct pci_dev *dev)
+{
+	arm64_msi.teardown_msi_irqs(dev);
+}
diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c
index 1ac0ace..21221e9 100644
--- a/drivers/irqchip/irq-gic-v2m.c
+++ b/drivers/irqchip/irq-gic-v2m.c
@@ -24,6 +24,10 @@
 #include <linux/of_pci.h>
 #include <linux/bitmap.h>
 
+#ifdef CONFIG_ARM64
+#include <asm/msi.h>
+#endif
+
 #include "irqchip.h"
 #include "irq-gic.h"
 
@@ -146,6 +150,79 @@ static void gicv2m_unmask_irq(struct irq_data *d)
 		unmask_msi_irq(d);
 }
 
+/*
+ * _gicv2m_setup_msi_irqs - Setup MSI interrupts for the given PCI device.
+ * This overrides the weak definition in ./drivers/pci/msi.c.
+ * If nvec interrupts are irqable, then assign it to PCI device.
+ * Otherwise return error.
+ *
+ * @pdev: PCI device which is requesting to enable MSI
+ * @nvec: number of MSI vectors
+ */
+static int _gicv2m_setup_msi_irqs(struct pci_dev *pdev, int nvec)
+{
+	int irq = 0, nvec_pow2 = 0, avail;
+	int i = 0;
+	struct msi_msg msg;
+	phys_addr_t addr;
+	struct msi_desc *entry;
+	struct msi_chip *chip = pdev->bus->msi;
+	struct v2m_data *data = container_of(chip, struct v2m_data, msi_chip);
+
+	BUG_ON(list_empty(&pdev->msi_list));
+	WARN_ON(!list_is_singular(&pdev->msi_list));
+
+	entry = list_first_entry(&pdev->msi_list, struct msi_desc, list);
+	WARN_ON(entry->irq);
+	WARN_ON(entry->msi_attrib.multiple);
+	WARN_ON(entry->nvec_used);
+	WARN_ON(!entry->dev);
+
+	avail = alloc_msi_irq(data, nvec, &irq);
+	if (avail != 0) {
+		dev_err(&pdev->dev,
+			"GICv2m: Failed to allocate %d irqs.\n", nvec);
+		return avail;
+	}
+
+	/* Set lowest of the new interrupts assigned to the PCI device */
+	nvec_pow2 = __roundup_pow_of_two(nvec);
+	entry->nvec_used = nvec;
+	entry->msi_attrib.multiple = ilog2(nvec_pow2);
+
+	for (i = 0; i < nvec; i++) {
+		irq_set_chip_data(irq+i, chip);
+		if (irq_set_msi_desc_off(irq, i, entry)) {
+			dev_err(&pdev->dev,
+				"GICv2m: Failed to set up MSI irq %d\n",
+				(irq+i));
+			return -EINVAL;
+		}
+
+		irq_set_irq_type((irq+i), IRQ_TYPE_EDGE_RISING);
+	}
+
+	addr = data->res.start + V2M_MSI_SETSPI_NS;
+	msg.address_hi = (u32)(addr >> 32);
+	msg.address_lo = (u32)(addr);
+	msg.data = irq;
+	write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+static int
+gicv2m_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+	int ret;
+
+	if (type == PCI_CAP_ID_MSI)
+		ret = _gicv2m_setup_msi_irqs(pdev, nvec);
+	else
+		ret = arm64_setup_msi_irqs(pdev, nvec, type);
+	return ret;
+}
+
 static struct irq_chip gicv2m_chip;
 
 #ifdef CONFIG_OF
@@ -156,6 +233,8 @@ gicv2m_of_init(struct device_node *node, struct gic_chip_data *gic)
 	unsigned int val;
 	struct v2m_data *v2m = &gic->v2m_data;
 
+	arm64_msi.setup_msi_irqs = &gicv2m_setup_msi_irqs;
+
 	v2m->msi_chip.owner = THIS_MODULE;
 	v2m->msi_chip.of_node = node;
 	v2m->msi_chip.setup_irq = gicv2m_setup_msi_irq;
-- 
1.9.0


  parent reply	other threads:[~2014-08-13 15:01 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-13 15:00 [PATCH 0/2 V4] irqchip: gic: Introduce ARM GICv2m MSI(-X) support suravee.suthikulpanit
2014-08-13 15:00 ` [PATCH 1/2 V4] irqchip: gic: Add supports for ARM GICv2m MSI(-X) suravee.suthikulpanit
2014-08-14  2:56   ` Jingoo Han
2014-08-28  9:15     ` Suravee Suthikulpanit
2014-08-14 17:55   ` Mark Rutland
2014-08-28  9:03     ` Suravee Suthikulpanit
2014-09-08 23:05     ` Suravee Suthikulpanit
2014-09-09 11:03       ` Mark Rutland
2014-08-15 14:03   ` Marc Zyngier
2014-08-28  8:59     ` Suravee Suthikulpanit
2014-09-05 16:15       ` Marc Zyngier
2014-08-13 15:00 ` suravee.suthikulpanit [this message]
2014-08-15 13:31   ` [PATCH 2/2 V4] irqchip: gicv2m: Add support for multiple MSI for ARM64 GICv2m Marc Zyngier
2014-08-15 14:53     ` Suravee Suthikulanit
2014-08-15 15:08       ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407942041-3291-3-git-send-email-suravee.suthikulpanit@amd.com \
    --to=suravee.suthikulpanit@amd.com \
    --cc=Catalin.Marinas@arm.com \
    --cc=Harish.Kasiviswanathan@amd.com \
    --cc=Will.Deacon@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®