From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, tony@atomide.com,
balbi@ti.com, Vinod Koul <vinod.koul@intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: [PATCH 02/15] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks
Date: Fri, 15 Aug 2014 19:42:30 +0200 [thread overview]
Message-ID: <1408124563-31541-3-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1408124563-31541-1-git-send-email-bigeasy@linutronix.de>
The OMAP UART provides support for HW assisted flow control. What is
missing is the support to throttle / unthrottle callbacks which are used
by the omap-serial driver at the moment.
This patch adds the callbacks. It should be safe to add them since they
are only invoked from the serial_core (uart_throttle()) if the feature
flags are set.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/tty/serial/8250/8250_core.c | 14 ++++++++++++++
include/linux/serial_core.h | 2 ++
2 files changed, 16 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index dde1331..35fe96e 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1318,6 +1318,16 @@ static void serial8250_start_tx(struct uart_port *port)
}
}
+static void serial8250_throttle(struct uart_port *port)
+{
+ port->throttle(port);
+}
+
+static void serial8250_unthrottle(struct uart_port *port)
+{
+ port->unthrottle(port);
+}
+
static void serial8250_stop_rx(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
@@ -2877,6 +2887,8 @@ static struct uart_ops serial8250_pops = {
.get_mctrl = serial8250_get_mctrl,
.stop_tx = serial8250_stop_tx,
.start_tx = serial8250_start_tx,
+ .throttle = serial8250_throttle,
+ .unthrottle = serial8250_unthrottle,
.stop_rx = serial8250_stop_rx,
.enable_ms = serial8250_enable_ms,
.break_ctl = serial8250_break_ctl,
@@ -3424,6 +3436,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.fifosize = up->port.fifosize;
uart->tx_loadsz = up->tx_loadsz;
uart->capabilities = up->capabilities;
+ uart->port.throttle = up->port.throttle;
+ uart->port.unthrottle = up->port.unthrottle;
/* Take tx_loadsz from fifosize if it wasn't set separately */
if (uart->port.fifosize && !uart->tx_loadsz)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f3ea531..edaaaa0 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -124,6 +124,8 @@ struct uart_port {
struct ktermios *old);
int (*startup)(struct uart_port *port);
void (*shutdown)(struct uart_port *port);
+ void (*throttle)(struct uart_port *port);
+ void (*unthrottle)(struct uart_port *port);
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
--
2.0.1
next prev parent reply other threads:[~2014-08-15 17:43 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-15 17:42 [PATCH v7] 8250-core based serial driver for OMAP + DMA Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 01/15] tty: serial: 8250_core: allow to overwrite & export serial8250_startup() Sebastian Andrzej Siewior
2014-08-15 17:42 ` Sebastian Andrzej Siewior [this message]
2014-08-15 17:42 ` [PATCH 03/15] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior
2014-08-20 9:23 ` Frans Klaver
2014-08-20 9:39 ` Frans Klaver
2014-09-01 14:48 ` Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 04/15] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 05/15] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior
2014-08-15 18:37 ` Lennart Sorensen
2014-08-15 19:27 ` Sebastian Andrzej Siewior
2014-08-15 19:33 ` Lennart Sorensen
2014-08-15 20:20 ` Sebastian Andrzej Siewior
2014-08-15 21:07 ` Tony Lindgren
2014-08-15 22:44 ` Tony Lindgren
2014-08-29 15:49 ` Sebastian Andrzej Siewior
2014-08-29 16:08 ` Tony Lindgren
2014-08-21 11:00 ` Sebastian Andrzej Siewior
2014-08-21 18:38 ` Tony Lindgren
2014-08-18 13:46 ` Heikki Krogerus
2014-09-01 13:31 ` Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 06/15] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior
2014-08-18 13:57 ` Heikki Krogerus
2014-09-01 14:38 ` Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 07/15] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior
2014-08-18 10:52 ` One Thousand Gnomes
2014-08-29 15:52 ` Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 08/15] dmaengine: edma: fix two faults which happen with the 8250_dma user Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 09/15] dmaengine: omap-dma: complete the transfer on terminate_all Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 10/15] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 11/15] tty: serial: 8250_dma: handle the when UART response while DMA remains idle Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 12/15] tty: serial: 8250_dma: add pm runtime Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 13/15] arm: dts: am33xx: add DMA properties for UART Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 14/15] arm: dts: dra7: " Sebastian Andrzej Siewior
2014-08-15 17:42 ` [PATCH 15/15] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior
2014-08-15 21:02 ` Tony Lindgren
2014-08-21 8:34 ` Sebastian Andrzej Siewior
2014-08-21 18:44 ` Tony Lindgren
2014-08-27 19:54 ` Sebastian Andrzej Siewior
2014-08-27 20:23 ` Tony Lindgren
2014-08-28 8:23 ` Sebastian Andrzej Siewior
2014-08-28 16:46 ` Tony Lindgren
2014-08-28 19:37 ` Sebastian Andrzej Siewior
2014-08-28 22:54 ` Tony Lindgren
2014-08-29 9:32 ` Sebastian Andrzej Siewior
2014-08-29 15:55 ` Felipe Balbi
2014-08-29 16:12 ` Tony Lindgren
2014-08-29 16:31 ` Sebastian Andrzej Siewior
2014-09-01 17:47 ` Sebastian Andrzej Siewior
2014-09-02 3:05 ` Sebastian Reichel
2014-09-02 16:55 ` Tony Lindgren
2014-09-02 18:39 ` Sebastian Andrzej Siewior
2014-09-02 20:15 ` Tony Lindgren
2014-09-02 20:38 ` Sebastian Reichel
2014-09-03 16:46 ` Sebastian Andrzej Siewior
2014-09-03 17:48 ` Tony Lindgren
2014-09-04 13:44 ` Sebastian Andrzej Siewior
2014-09-04 14:52 ` Tony Lindgren
2014-09-04 14:56 ` Sebastian Andrzej Siewior
2014-09-04 16:25 ` Tony Lindgren
2014-08-15 18:17 ` [PATCH v7] 8250-core based serial driver for OMAP + DMA Lennart Sorensen
2014-08-15 19:14 ` Sebastian Andrzej Siewior
2014-08-15 20:28 ` Tony Lindgren
2014-08-17 20:35 ` Sebastian Andrzej Siewior
2014-08-18 15:15 ` Peter Hurley
2014-08-18 16:37 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408124563-31541-3-git-send-email-bigeasy@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=tony@atomide.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®