[PATCH/RFC v5 10/10] ARM: dts: add aat1290 current regulator device node

[Jacek Anaszewski <j.anaszewski@samsung.com>]

Add device node for AAT1290 1.5A Step-Up Current Regulator
for Flash LEDs along with flash_muxes node containing
information about a multiplexer that is used for switching
between software and external strobe signal source.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 5e066cd..2106a1d 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -781,4 +781,28 @@
 		pulldown-ohm = <100000>; /* 100K */
 		io-channels = <&adc 2>;  /* Battery temperature */
 	};
+
+	flash_muxes {
+		flash_mux1: mux1 {
+			gpios = <&gpj1 0 0>;
+		};
+	};
+
+	aat1290: aat1290 {
+		compatible = "skyworks,aat1290";
+		gpios = <&gpj1 1 0>, <&gpj1 2 0>;
+		flash-timeout = <1940000>;
+		status = "okay";
+
+		gate-software-strobe {
+			mux = <&flash_mux1>;
+			mux-line-id = <0>;
+		};
+
+		gate-external-strobe {
+			strobe-provider = <&s5c73m3_spi>;
+			mux = <&flash_mux1>;
+			mux-line-id = <1>;
+		};
+	};
 };
-- 
1.7.9.5