mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pramod Gurav <pramod.gurav@smartplayin.com>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Cc: Pramod Gurav <pramod.gurav@smartplayin.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bjorn Andersson <bjorn.andersson@sonymobile.com>,
	"Ivan T. Ivanov" <iivanov@mm-sol.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Andy Gross <agross@codeaurora.org>
Subject: [PATCH 2/2] pinctrl: qcom: Add support for reset for apq8064
Date: Tue, 26 Aug 2014 11:31:07 -0700	[thread overview]
Message-ID: <1409077867-9446-2-git-send-email-pramod.gurav@smartplayin.com> (raw)
In-Reply-To: <1409077867-9446-1-git-send-email-pramod.gurav@smartplayin.com>

This patch adds support for reset functions to reboot the boards
with soc apq8064.

CC: Linus Walleij <linus.walleij@linaro.org>
CC: Bjorn Andersson <bjorn.andersson@sonymobile.com>
CC: "Ivan T. Ivanov" <iivanov@mm-sol.com>
CC: Stephen Boyd <sboyd@codeaurora.org>
CC: Andy Gross <agross@codeaurora.org>
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
---
 drivers/pinctrl/qcom/pinctrl-apq8064.c |    7 +++++-
 drivers/pinctrl/qcom/pinctrl-msm.c     |   36 ++++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+), 1 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-apq8064.c b/drivers/pinctrl/qcom/pinctrl-apq8064.c
index feb6f15..ef1263c 100644
--- a/drivers/pinctrl/qcom/pinctrl-apq8064.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8064.c
@@ -324,6 +324,7 @@ enum apq8064_functions {
 	APQ_MUX_tsif1,
 	APQ_MUX_tsif2,
 	APQ_MUX_usb2_hsic,
+	APQ_MUX_ps_hold,
 	APQ_MUX_NA,
 };
 
@@ -351,6 +352,9 @@ static const char * const gpio_groups[] = {
 	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
 	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89"
 };
+static const char * const ps_hold_groups[] = {
+	"gpio78"
+};
 static const char * const gsbi1_groups[] = {
 	"gpio18", "gpio19", "gpio20", "gpio21"
 };
@@ -477,6 +481,7 @@ static const struct msm_function apq8064_functions[] = {
 	FUNCTION(tsif1),
 	FUNCTION(tsif2),
 	FUNCTION(usb2_hsic),
+	FUNCTION(ps_hold),
 };
 
 static const struct msm_pingroup apq8064_groups[] = {
@@ -558,7 +563,7 @@ static const struct msm_pingroup apq8064_groups[] = {
 	PINGROUP(75, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(76, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(77, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-	PINGROUP(78, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(78, ps_hold, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(79, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(80, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
 	PINGROUP(81, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 2738108..f4e4f8f 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -12,6 +12,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -27,12 +28,17 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 
+#include <asm/system_misc.h>
+
 #include "../core.h"
 #include "../pinconf.h"
 #include "pinctrl-msm.h"
 #include "../pinctrl-utils.h"
 
 #define MAX_NR_GPIO 300
+#define PS_HOLD_OFFSET 0x820
+
+static void __iomem *msm_ps_hold;
 
 /**
  * struct msm_pinctrl - state for a pinctrl-msm device
@@ -848,10 +854,31 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
 	return 0;
 }
 
+static void qcom_reset(enum reboot_mode reboot_mode, const char *cmd)
+{
+	writel(0, msm_ps_hold);
+	mdelay(10000);
+}
+
+const struct msm_function
+*find_pshold_function(const struct msm_function *functions,
+					unsigned nfunctions, const char *name)
+{
+	int i = 0;
+	const struct msm_function *func;
+
+	for (func = functions; i <= nfunctions; func++, i++)
+		if (!strcmp(func->name, name))
+			return func;
+
+	return NULL;
+}
+
 int msm_pinctrl_probe(struct platform_device *pdev,
 		      const struct msm_pinctrl_soc_data *soc_data)
 {
 	struct msm_pinctrl *pctrl;
+	const struct msm_function *func;
 	struct resource *res;
 	int ret;
 
@@ -871,6 +898,15 @@ int msm_pinctrl_probe(struct platform_device *pdev,
 	if (IS_ERR(pctrl->regs))
 		return PTR_ERR(pctrl->regs);
 
+#ifdef CONFIG_ARM
+	func = find_pshold_function(soc_data->functions,
+					soc_data->nfunctions, "ps_hold");
+	if (func) {
+		dev_dbg(&pdev->dev, "Found Function %s\n", func->name);
+		msm_ps_hold = pctrl->regs + PS_HOLD_OFFSET;
+		arm_pm_restart = qcom_reset;
+	}
+#endif
 	pctrl->irq = platform_get_irq(pdev, 0);
 	if (pctrl->irq < 0) {
 		dev_err(&pdev->dev, "No interrupt defined for msmgpio\n");
-- 
1.7.0.4


  reply	other threads:[~2014-08-26 18:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-26 18:31 [PATCH 1/2] ARM: DT: APQ8064: Add pinctrl support This patch adds device tree nodes to support pinctrl for apq8064 SOC Pramod Gurav
2014-08-26 18:31 ` Pramod Gurav [this message]
2014-08-27 13:39   ` [PATCH 2/2] pinctrl: qcom: Add support for reset for apq8064 Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409077867-9446-2-git-send-email-pramod.gurav@smartplayin.com \
    --to=pramod.gurav@smartplayin.com \
    --cc=agross@codeaurora.org \
    --cc=bjorn.andersson@sonymobile.com \
    --cc=iivanov@mm-sol.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®