From: Vivek Gautam <gautam.vivek@samsung.com>
To: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
gregkh@linuxfoundation.org, balbi@ti.com, kishon@ti.com,
kgene.kim@samsung.com, Vivek Gautam <gautam.vivek@samsung.com>
Subject: [PATCH 3/5] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply
Date: Thu, 28 Aug 2014 13:31:58 +0530 [thread overview]
Message-ID: <1409212920-28526-4-git-send-email-gautam.vivek@samsung.com> (raw)
In-Reply-To: <1409212920-28526-1-git-send-email-gautam.vivek@samsung.com>
Some Exynos SoCs have a separate regulator controlling a
Boost 5V supply which goes as input for VBUS regulator.
So adding a control for the same in driver, to enable
vbus supply on the port.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
---
drivers/phy/phy-exynos5-usbdrd.c | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 685c108..a6d0cb7 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -176,6 +176,7 @@ struct exynos5_usbdrd_phy {
u32 extrefclk;
struct clk *ref_clk;
struct regulator *vbus;
+ struct regulator *vbus_boost;
};
static inline
@@ -457,11 +458,19 @@ static int exynos5_usbdrd_phy_power_on(struct phy *phy)
clk_prepare_enable(phy_drd->ref_clk);
/* Enable VBUS supply */
+ if (phy_drd->vbus_boost) {
+ ret = regulator_enable(phy_drd->vbus_boost);
+ if (ret) {
+ dev_err(phy_drd->dev,
+ "Failed to enable VBUS boost supply\n");
+ goto fail_vbus;
+ }
+ }
if (phy_drd->vbus) {
ret = regulator_enable(phy_drd->vbus);
if (ret) {
dev_err(phy_drd->dev, "Failed to enable VBUS supply\n");
- goto fail_vbus;
+ goto fail_vbus_boost;
}
}
@@ -470,6 +479,9 @@ static int exynos5_usbdrd_phy_power_on(struct phy *phy)
return 0;
+fail_vbus_boost:
+ if (phy_drd->vbus_boost)
+ regulator_disable(phy_drd->vbus_boost);
fail_vbus:
clk_disable_unprepare(phy_drd->ref_clk);
if (!IS_ERR(phy_drd->pipeclk))
@@ -493,6 +505,8 @@ static int exynos5_usbdrd_phy_power_off(struct phy *phy)
/* Disable VBUS supply */
if (phy_drd->vbus)
regulator_disable(phy_drd->vbus);
+ if (phy_drd->vbus_boost)
+ regulator_disable(phy_drd->vbus_boost);
clk_disable_unprepare(phy_drd->ref_clk);
if (!IS_ERR(phy_drd->pipeclk))
@@ -645,7 +659,7 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
break;
}
- /* Get Vbus regulator */
+ /* Get Vbus regulators */
phy_drd->vbus = devm_regulator_get(dev, "vbus");
if (IS_ERR(phy_drd->vbus)) {
ret = PTR_ERR(phy_drd->vbus);
@@ -655,6 +669,15 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
dev_warn(dev, "Failed to get VBUS supply regulator\n");
phy_drd->vbus = NULL;
}
+ phy_drd->vbus_boost = devm_regulator_get(dev, "vbus-boost");
+ if (IS_ERR(phy_drd->vbus_boost)) {
+ ret = PTR_ERR(phy_drd->vbus_boost);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ dev_warn(dev, "Failed to get VBUS boost supply regulator\n");
+ phy_drd->vbus_boost = NULL;
+ }
dev_vdbg(dev, "Creating usbdrd_phy phy\n");
--
1.7.10.4
next prev parent reply other threads:[~2014-08-28 8:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-28 8:01 [PATCH 0/5] usb: dwc3/phy-exynos5-usbdrd: Extend support to Exynos7 Vivek Gautam
2014-08-28 8:01 ` [PATCH 1/5] usb: dwc3: exynos: Add support for SCLK present on Exynos7 Vivek Gautam
2014-08-28 18:48 ` Mark Rutland
2014-09-02 10:39 ` Vivek Gautam
2014-09-02 11:01 ` Mark Rutland
2014-09-02 14:35 ` Felipe Balbi
2014-08-28 8:01 ` [PATCH 2/5] phy: exynos5-usbdrd: Add pipe-clk and utmi-clk support Vivek Gautam
2014-08-28 18:50 ` Mark Rutland
2014-08-28 8:01 ` Vivek Gautam [this message]
2014-08-28 19:16 ` [PATCH 3/5] phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply Felipe Balbi
2014-09-01 7:57 ` Vivek Gautam
2014-08-28 8:01 ` [PATCH 4/5] usb: dwc3: Adding Kconfig dependency for Exynos7 Vivek Gautam
2014-08-28 19:28 ` Felipe Balbi
2014-09-03 3:53 ` Vivek Gautam
2014-08-28 8:02 ` [PATCH 5/5] phy: exynos5-usbdrd: " Vivek Gautam
2014-08-28 15:06 ` Daniele Forsi
2014-09-01 8:00 ` Vivek Gautam
2014-09-02 14:37 ` Felipe Balbi
2014-09-03 4:02 ` Vivek Gautam
2014-09-03 14:46 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409212920-28526-4-git-send-email-gautam.vivek@samsung.com \
--to=gautam.vivek@samsung.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kgene.kim@samsung.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®